[Mon Aug  6 10:27:04 2012] Detection parameters:
  Position = (289.1, 129.0) = 18 16 0.25 -14 13 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 512.0 +/- 32.4
  Background counts = 70.1
  Rate = 0.03 +/- 0.002

[Mon Aug  6 10:27:08 2012] Off-axis axis estimate = 12.31'
[Mon Aug  6 15:07:54 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 15:07:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug  6 15:07:54 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Mon Aug  6 15:07:54 2012] source mask rpix=2.9, npix_max = 46, mask sum = 35, frac = 0.760
[Mon Aug  6 15:07:54 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.58"
[Mon Aug  6 20:45:51 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src12.ximg exists
[Mon Aug  6 20:45:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src12.csv
[Mon Aug  6 20:45:51 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Aug  6 20:45:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src12.csv
[Mon Aug  6 20:45:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 20:45:53 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Aug  6 20:45:53 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Aug  6 20:45:53 2012] Fit fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Aug  6 20:46:28 2012] Warning, spatial fit 12 centroid is now closest to src. 8
[Mon Aug  6 20:46:28 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 20:46:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 20:46:28 2012] Assessing source extent using major
[Mon Aug  6 20:46:28 2012] Source does appear to be extended
[Mon Aug  6 20:46:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 20:46:28 2012] Source is confused with source 7
[Mon Aug  6 23:46:25 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 23:46:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug  6 23:46:25 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Mon Aug  6 23:46:25 2012] source mask rpix=2.9, npix_max = 46, mask sum = 35, frac = 0.760
[Mon Aug  6 23:46:25 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.58"
[Tue Aug  7 05:08:08 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src11.ximg exists
[Tue Aug  7 05:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src11.csv
[Tue Aug  7 05:08:08 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Aug  7 05:08:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src11.csv
[Tue Aug  7 05:08:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 05:08:10 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Aug  7 05:08:10 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Aug  7 05:08:10 2012] Fit fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Aug  7 05:08:43 2012] Warning, spatial fit 11 centroid is now closest to src. 90
[Tue Aug  7 05:08:43 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 05:08:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 05:08:43 2012] Assessing source extent using major
[Tue Aug  7 05:08:43 2012] Source does appear to be extended
[Tue Aug  7 05:08:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 06:13:33 2012] XMMSAS src. selection expression = ellipse(25102.820862, 11170.635605, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug  7 06:13:33 2012] Writing source region out to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug  7 06:13:33 2012] Extracting stamp from image fullrun_mos2_xmm0653910501_pi300-10000_cl_sm2.00.img.gz, (252, 91) - (327, 166)
[Tue Aug  7 06:13:33 2012] XMMSAS bgd. selection expression = annulus(25102.820862, 11170.635605, 1087.500000, 2175.000000, X, Y) && !ellipse(25247.157600, 9809.218000, 1109.536032, 1109.536032, 0.000000, X, Y) && !ellipse(25081.612488, 13348.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25151.220000, 9123.470000, 1222.760035, 1006.584029, 216.217000, X, Y) && !ellipse(25044.296051, 14126.911163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25125.205414, 10565.166130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25102.353577, 10049.474480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.536469, 12228.101913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.122986, 12830.157684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25337.727600, 8681.374000, 611.379218, 611.379218, 0.000000, X, Y) && !ellipse(24499.815918, 11785.697037, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug  7 06:13:33 2012] Writing fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src2.gif
[Tue Aug  7 06:16:26 2012] Mean detx,y = (82.31, 13097.39) 
[Tue Aug  7 06:16:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 06:16:37 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 06:16:38 2012] Setting source spectrum file to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug  7 06:16:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug  7 06:47:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug  7 06:47:06 2012] rmf not generated due to insufficient counts
[Tue Aug  7 07:56:57 2012] Updating aperture counts using extracted products
[Tue Aug  7 07:56:57 2012] Error reading totcts from fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug  7 07:56:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 07:56:58 2012] Using photon index=1.80, rate=0.0259, arf fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src2.arf
[Tue Aug  7 07:56:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 07:56:58 2012] Updating source flux to 8.9e-13
[Tue Aug  7 08:00:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug  7 08:04:10 2012] xmm0653910501/analysis//spectral/fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete