[Mon Aug  6 10:27:05 2012] Detection parameters:
  Position = (277.7, 385.4) = 18 16 3.65 -13 54 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.4 +/- 23.2
  Background counts = 245.5
  Rate = 0.008 +/- 0.002

[Mon Aug  6 10:27:08 2012] Off-axis axis estimate = 6.48'
[Mon Aug  6 15:07:54 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 15:07:54 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Mon Aug  6 15:07:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.843
[Mon Aug  6 15:07:54 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 9.67"
[Mon Aug  6 20:45:52 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src85.ximg exists
[Mon Aug  6 20:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src85.csv
[Mon Aug  6 20:45:52 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src85_1.ximg exists
[Mon Aug  6 20:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src85.csv
[Mon Aug  6 20:45:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 20:45:55 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Mon Aug  6 20:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src85.csv
[Mon Aug  6 20:45:55 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Mon Aug  6 20:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src85.csv
[Mon Aug  6 20:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 20:46:28 2012] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.221007 pixels away
[Mon Aug  6 20:46:28 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 20:46:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 20:46:28 2012] Assessing source extent using major
[Mon Aug  6 20:46:28 2012] Source does appear to be extended
[Mon Aug  6 20:46:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 23:46:25 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 23:46:25 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Mon Aug  6 23:46:25 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.843
[Mon Aug  6 23:46:25 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 9.67"
[Tue Aug  7 05:08:10 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src79.ximg exists
[Tue Aug  7 05:08:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src79.csv
[Tue Aug  7 05:08:10 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src79_1.ximg exists
[Tue Aug  7 05:08:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src79.csv
[Tue Aug  7 05:08:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 05:08:12 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Tue Aug  7 05:08:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src79.csv
[Tue Aug  7 05:08:12 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Tue Aug  7 05:08:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src79.csv
[Tue Aug  7 05:08:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 05:08:43 2012] Spatial fit model total counts = 2929.970000, observed total counts = 2557.000000
[Tue Aug  7 05:08:43 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug  7 05:08:43 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 05:08:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 05:08:43 2012] Assessing source extent using major
[Tue Aug  7 05:08:43 2012] Source does appear to be extended
[Tue Aug  7 05:08:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 06:13:35 2012] XMMSAS src. selection expression = ellipse(24112.486969, 33479.048004, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug  7 06:13:35 2012] Writing source region out to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src10_src.reg
[Tue Aug  7 06:13:35 2012] Extracting stamp from image fullrun_mos2_xmm0653910501_pi300-10000_cl_sm2.00.img.gz, (240, 348) - (315, 423)
[Tue Aug  7 06:13:35 2012] XMMSAS bgd. selection expression = annulus(24112.486969, 33479.048004, 1087.500000, 2175.000000, X, Y) && !ellipse(24289.266785, 31361.656830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24764.748016, 32835.439697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24892.760254, 31476.529327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.822021, 32228.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22649.441040, 31401.219421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24781.254333, 32044.872864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.028351, 31441.320984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22554.945600, 32330.576760, 1498.488043, 514.156815, 0.000000, X, Y) && !ellipse(23389.339294, 31352.154480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22060.511734, 31387.949585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23766.194153, 31392.184357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.397614, 31525.153534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21746.522000, 32309.126620, 728.692821, 728.692821, 0.000000, X, Y) && !ellipse(26326.746887, 31615.578522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21246.354965, 31351.137604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25580.351776, 32109.729919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25985.056000, 32061.340600, 1441.328041, 1441.328041, 0.000000, X, Y)
[Tue Aug  7 06:13:35 2012] Writing fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src10.gif
[Tue Aug  7 06:44:05 2012] Mean detx,y = (-486.24, -9196.79) 
[Tue Aug  7 06:44:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 06:44:21 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 06:44:21 2012] Setting source spectrum file to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Aug  7 06:44:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Aug  7 07:55:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug  7 07:55:40 2012] rmf not generated due to insufficient counts
[Tue Aug  7 07:56:58 2012] Updating aperture counts using extracted products
[Tue Aug  7 07:56:58 2012] Error reading totcts from fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Aug  7 07:56:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 07:56:59 2012] Using photon index=1.80, rate=0.00785, arf fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src10.arf
[Tue Aug  7 07:56:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 07:56:59 2012] Updating source flux to 1.4e-13
[Tue Aug  7 08:00:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting