[Thu Mar 15 14:57:14 2012] Detection parameters:
  Position = (227.9, 363.8) = 0 58 5.15 -66 49 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.4 +/- 27.0
  Background counts = 175.9
  Rate = 0.008 +/- 0.001

[Thu Mar 15 14:57:17 2012] Off-axis axis estimate = 6.97'
[Thu Mar 15 15:01:25 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:01:25 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Thu Mar 15 15:01:25 2012] source mask rpix=2.3, npix_max = 30, mask sum = 32, frac = 1.036
[Thu Mar 15 15:01:25 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.91"
[Thu Mar 15 18:44:45 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src33.ximg exists
[Thu Mar 15 18:44:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src33.csv
[Thu Mar 15 18:44:45 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Mar 15 18:44:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src33.csv
[Thu Mar 15 18:44:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 18:44:46 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Mar 15 18:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Mar 15 18:44:46 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Mar 15 18:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Mar 15 18:44:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:36:13 2012] Warning, spatial fit 33 centroid is now closest to src. 42
[Thu Mar 15 22:36:13 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 22:36:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 22:36:13 2012] Assessing source extent using major
[Thu Mar 15 22:36:13 2012] Source does appear to be extended
[Thu Mar 15 22:36:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:36:13 2012] Source is confused with source 40
[Thu Mar 15 22:36:13 2012] Source is confused with source 42
[Thu Mar 15 22:36:46 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:36:46 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Thu Mar 15 22:36:46 2012] source mask rpix=2.3, npix_max = 30, mask sum = 32, frac = 1.036
[Thu Mar 15 22:36:46 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 9.91"
[Fri Mar 16 02:26:07 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src32.ximg exists
[Fri Mar 16 02:26:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src32.csv
[Fri Mar 16 02:26:07 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Mar 16 02:26:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src32.csv
[Fri Mar 16 02:26:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 02:26:09 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Mar 16 02:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Mar 16 02:26:09 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Mar 16 02:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Mar 16 02:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 06:04:24 2012] Source 33 is offset by -0.788252 and 3.113405 pixels which is larger than
2 X fitted extent = 2.231701 x 2.231701, not incorporating fit results
[Fri Mar 16 06:04:24 2012] Warning, spatial fit 32 centroid is now closest to src. 44
[Fri Mar 16 06:04:24 2012] Source 33 is offset by -5.044206 and -4.142549 pixels which is larger than
2 X fitted extent = 1.237793 x 2.826071, not incorporating fit results
[Fri Mar 16 06:04:24 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 06:04:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 06:04:24 2012] Assessing source extent using major
[Fri Mar 16 06:04:24 2012] Source does appear to be extended
[Fri Mar 16 06:04:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:04:59 2012] XMMSAS src. selection expression = ellipse(19775.158096, 31598.602264, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 06:04:59 2012] Writing source region out to fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src33_src.reg
[Fri Mar 16 06:04:59 2012] Extracting stamp from image fullrun_pn_xmm0653880201_pi300-10000_cl_sm2.00.img.gz, (190, 326) - (265, 401)
[Fri Mar 16 06:04:59 2012] XMMSAS bgd. selection expression = annulus(19775.158096, 31598.602264, 1087.500000, 2175.000000, X, Y) && !ellipse(20409.082000, 32484.492000, 527.842415, 527.842415, 0.000000, X, Y) && !ellipse(20102.158000, 29454.242000, 332.963210, 332.963210, 0.000000, X, Y) && !ellipse(22051.758000, 33803.183800, 403.080812, 403.080812, 0.000000, X, Y) && !ellipse(18933.569565, 33355.801544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17215.512054, 33416.599060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20071.655838, 33049.952789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18351.946899, 33093.181976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18521.000580, 32587.473236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16781.696198, 32463.764801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21471.090000, 32827.474000, 1553.264045, 1553.264045, 0.000000, X, Y) && !ellipse(17445.381220, 32640.832000, 1451.504042, 1451.504042, 0.000000, X, Y) && !ellipse(22237.627411, 32240.118408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17813.472443, 31968.429260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19304.773193, 32242.311462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16755.088821, 31999.936493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21191.188766, 31975.565979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17606.724000, 32116.292600, 1606.056046, 1606.056046, 0.000000, X, Y) && !ellipse(18637.898000, 31627.910000, 1702.800049, 1702.800049, 0.000000, X, Y) && !ellipse(21712.928574, 31648.721252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.843109, 31193.707642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18148.347305, 31148.683655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20669.068000, 31016.758000, 1502.168043, 1502.168043, 0.000000, X, Y) && !ellipse(17174.587433, 31275.243591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21226.136917, 30742.280975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19633.378600, 31171.118000, 1539.240044, 1539.240044, 0.000000, X, Y) && !ellipse(20786.062000, 30784.392000, 3036.352087, 3036.352087, 0.000000, X, Y) && !ellipse(18157.610703, 30430.423889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22007.814713, 30361.050629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19682.063477, 30367.412079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.865000, 29889.076000, 890.656026, 890.656026, 0.000000, X, Y)
[Fri Mar 16 06:04:59 2012] Writing fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src33.gif
[Fri Mar 16 06:29:30 2012] Mean detx,y = (7200.01, 2193.93) 
[Fri Mar 16 06:29:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 06:29:46 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 06:29:47 2012] Setting source spectrum file to fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Mar 16 06:29:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Mar 16 07:56:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 07:56:27 2012] rmf not generated due to insufficient counts
[Fri Mar 16 10:37:44 2012] Updating aperture counts using extracted products
[Fri Mar 16 10:37:44 2012] Error reading totcts from fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Mar 16 10:37:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:37:49 2012] Using photon index=1.80, rate=0.00806, arf fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src33.arf
[Fri Mar 16 10:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:37:49 2012] Updating source flux to 2.8e-14
[Fri Mar 16 10:40:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting