[Thu Mar 15 14:57:14 2012] Detection parameters:
  Position = (187.7, 369.0) = 0 58 34.75 -66 49 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.1 +/- 21.8
  Background counts = 152.2
  Rate = 0.005 +/- 0.0009

[Thu Mar 15 14:57:17 2012] Off-axis axis estimate = 9.52'
[Thu Mar 15 15:01:25 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:01:25 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Thu Mar 15 15:01:25 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Thu Mar 15 15:01:25 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 11.19"
[Thu Mar 15 18:44:45 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src30.ximg exists
[Thu Mar 15 18:44:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src30.csv
[Thu Mar 15 18:44:45 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Mar 15 18:44:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src30.csv
[Thu Mar 15 18:44:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 18:44:46 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Mar 15 18:44:46 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Mar 15 18:44:46 2012] Fit fullrun_pn_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Mar 15 22:36:13 2012] Source 30 is offset by 4.430700 and -8.121624 pixels which is larger than
2 X fitted extent = 2.106336 x 2.106336, not incorporating fit results
[Thu Mar 15 22:36:13 2012] Warning, spatial fit 30 centroid is now closest to src. 22
[Thu Mar 15 22:36:13 2012] Source 30 is offset by 6.156792 and 5.892043 pixels which is larger than
2 X fitted extent = 1.259393 x 1.259393, not incorporating fit results
[Thu Mar 15 22:36:13 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 22:36:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 22:36:13 2012] Assessing source extent using major
[Thu Mar 15 22:36:13 2012] Source does appear to be extended
[Thu Mar 15 22:36:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:36:13 2012] Source is confused with source 22
[Thu Mar 15 22:36:46 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:36:46 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Thu Mar 15 22:36:46 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Thu Mar 15 22:36:46 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 11.19"
[Fri Mar 16 02:26:07 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src29.ximg exists
[Fri Mar 16 02:26:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src29.csv
[Fri Mar 16 02:26:07 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Mar 16 02:26:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src29.csv
[Fri Mar 16 02:26:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 02:26:09 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Mar 16 02:26:09 2012] fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Mar 16 02:26:09 2012] Fit fullrun_pn_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Mar 16 06:04:24 2012] Source 30 is offset by 0.784953 and 4.067323 pixels which is larger than
2 X fitted extent = 1.277163 x 1.277163, not incorporating fit results
[Fri Mar 16 06:04:24 2012] Warning, spatial fit 29 centroid is now closest to src. 18
[Fri Mar 16 06:04:24 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.558083 pixels away
[Fri Mar 16 06:04:24 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 06:04:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 06:04:24 2012] Assessing source extent using major
[Fri Mar 16 06:04:24 2012] Source does appear to be extended
[Fri Mar 16 06:04:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:04:59 2012] XMMSAS src. selection expression = ellipse(16279.308899, 32055.307129, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 06:04:59 2012] Writing source region out to fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src30_src.reg
[Fri Mar 16 06:04:59 2012] Extracting stamp from image fullrun_pn_xmm0653880201_pi300-10000_cl_sm2.00.img.gz, (150, 332) - (225, 407)
[Fri Mar 16 06:04:59 2012] XMMSAS bgd. selection expression = annulus(16279.308899, 32055.307129, 1087.500000, 2175.000000, X, Y) && !ellipse(18933.569565, 33355.801544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17215.512054, 33416.599060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18351.946899, 33093.181976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18521.000580, 32587.473236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16781.696198, 32463.764801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17445.381220, 32640.832000, 1451.504042, 1451.504042, 0.000000, X, Y) && !ellipse(17813.472443, 31968.429260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19304.773193, 32242.311462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16755.088821, 31999.936493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17606.724000, 32116.292600, 1606.056046, 1606.056046, 0.000000, X, Y) && !ellipse(18637.898000, 31627.910000, 1702.800049, 1702.800049, 0.000000, X, Y) && !ellipse(18148.347305, 31148.683655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16468.936401, 31288.239960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17174.587433, 31275.243591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19633.378600, 31171.118000, 1539.240044, 1539.240044, 0.000000, X, Y) && !ellipse(16689.998123, 30752.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20786.062000, 30784.392000, 3036.352087, 3036.352087, 0.000000, X, Y) && !ellipse(18157.610703, 30430.423889, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 06:04:59 2012] Writing fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src30.gif
[Fri Mar 16 06:27:22 2012] Mean detx,y = (10310.29, 435.77) 
[Fri Mar 16 06:27:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 06:27:52 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 06:27:52 2012] Setting source spectrum file to fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Mar 16 06:27:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Mar 16 07:55:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 07:55:54 2012] rmf not generated due to insufficient counts
[Fri Mar 16 10:37:44 2012] Updating aperture counts using extracted products
[Fri Mar 16 10:37:44 2012] Error reading totcts from fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Mar 16 10:37:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:37:48 2012] Using photon index=1.80, rate=0.00454, arf fullrun_pn_xmm0653880201_pi300-10000_pass1_cl_src30.arf
[Fri Mar 16 10:37:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:37:49 2012] Updating source flux to 1.8e-14
[Fri Mar 16 10:40:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting