[Thu Mar 15 14:57:27 2012] Detection parameters:
  Position = (226.3, 358.1) = 0 58 6.31 -66 50 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.5 +/- 16.1
  Background counts = 55.8
  Rate = 0.003 +/- 0.0005

[Thu Mar 15 14:57:28 2012] Off-axis axis estimate = 6.79'
[Thu Mar 15 20:43:05 2012] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 20:43:05 2012] Initial guess for spatial extent in simple fitting = 9.82"
[Thu Mar 15 20:43:05 2012] source mask rpix=2.3, npix_max = 30, mask sum = 28, frac = 0.920
[Thu Mar 15 20:43:05 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.82"
[Thu Mar 15 22:35:57 2012] fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_src23.ximg exists
[Thu Mar 15 22:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_src23.csv
[Thu Mar 15 22:35:57 2012] fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Mar 15 22:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_src23.csv
[Thu Mar 15 22:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:35:58 2012] fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Mar 15 22:35:58 2012] fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Mar 15 22:35:58 2012] Fit fullrun_mos2_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Mar 15 22:36:30 2012] Warning, spatial fit 23 centroid is now closest to src. 29
[Thu Mar 15 22:36:30 2012] Spatial fit model total counts = 1053.810000, observed total counts = 1054.000000
[Thu Mar 15 22:36:30 2012] Offset between fit and detection position for source 39 = 0.217420 pixels
[Thu Mar 15 22:36:30 2012] Warning, changing simple spatial fit ID from 23 to 42
[Thu Mar 15 22:36:30 2012] 1030.928800 total counts/ 1011.560000 bgd. counts: snr = 0.608985
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.217420 pixels
  Position = (226.4, 358.3) = 0 58 6.25 -66 50 6.2
  Extent = 3.8 (2.6-6.9)", rotation angle = 0
  Source counts = 19.4 +/- 32.1
  Background counts = 1011.6
  Rate = 0.0004 +/- 0.0007
  Deleting source due to low Poisson probability