[Thu Mar 15 14:57:19 2012] Detection parameters:
  Position = (354.5, 169.8) = 0 56 31.46 -67 3 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 333.5 +/- 22.8
  Background counts = 26.3
  Rate = 0.007 +/- 0.0005

[Thu Mar 15 14:57:23 2012] Off-axis axis estimate = 10.17'
[Thu Mar 15 18:44:47 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 18:44:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 18:44:47 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Thu Mar 15 18:44:47 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060
[Thu Mar 15 18:44:47 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.52"
[Thu Mar 15 20:43:04 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar 15 20:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src5.csv
[Thu Mar 15 20:43:04 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar 15 20:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src5.csv
[Thu Mar 15 20:43:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:43:04 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar 15 20:43:04 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar 15 20:43:04 2012] Fit fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Mar 15 22:36:21 2012] Spatial fit model total counts = 551.000000, observed total counts = 551.000000
[Thu Mar 15 22:36:21 2012] Offset between fit and detection position for source 4 = 0.105611 pixels
[Thu Mar 15 22:36:21 2012] 546.187000 total counts/ 333.839000 bgd. counts: snr = 11.621967
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.105611 pixels
  Position = (354.4, 169.7) = 0 56 31.53 -67 3 46.8
  Extent = 5.0 (4.3-5.6)", rotation angle = 0
  Source counts = 212.3 +/- 23.4
  Background counts = 333.8
  Rate = 0.005 +/- 0.0005
[Thu Mar 15 22:36:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 22:36:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 22:36:21 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 22:36:21 2012] Source does appear to be extended
[Thu Mar 15 22:36:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 02:26:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 02:26:09 2012] Initial guess for spatial extent in simple fitting = 4.99"
[Fri Mar 16 02:26:09 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.829
[Fri Mar 16 02:26:09 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.99"
[Fri Mar 16 04:18:36 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Mar 16 04:18:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src5.csv
[Fri Mar 16 04:18:36 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Mar 16 04:18:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src5.csv
[Fri Mar 16 04:18:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 04:18:37 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Mar 16 04:18:37 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Mar 16 04:18:37 2012] Fit fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Mar 16 06:04:33 2012] Spatial fit model total counts = 550.508000, observed total counts = 550.000000
[Fri Mar 16 06:04:33 2012] Offset between fit and detection position for source 4 = 0.016043 pixels
[Fri Mar 16 06:04:33 2012] 548.136000 total counts/ 337.774000 bgd. counts: snr = 11.446012
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.016043 pixels
  Position = (354.4, 169.7) = 0 56 31.52 -67 3 46.8
  Extent = 5.0 (4.2-5.6)", rotation angle = 0
  Source counts = 210.4 +/- 23.4
  Background counts = 337.8
  Rate = 0.005 +/- 0.0005
[Fri Mar 16 06:04:33 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 06:04:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 06:04:33 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 06:04:33 2012] Source does appear to be extended
[Fri Mar 16 06:04:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 08:49:52 2012] XMMSAS src. selection expression = ellipse(30781.357800, 14717.639400, 297.146409, 297.146409, 0.000000, X, Y)
[Fri Mar 16 08:49:52 2012] Writing source region out to fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 16 08:49:52 2012] Extracting stamp from image fullrun_mos1_xmm0653880201_pi300-10000_cl_sm2.00.img.gz, (337, 153) - (371, 187)
[Fri Mar 16 08:49:52 2012] XMMSAS bgd. selection expression = annulus(30781.357800, 14717.639400, 495.244014, 990.488029, X, Y) && !ellipse(31616.032400, 14641.574000, 420.557612, 420.557612, 0.000000, X, Y)
[Fri Mar 16 08:49:52 2012] Writing fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src4.gif
[Fri Mar 16 08:53:36 2012] Mean detx,y = (4430.59, -12088.08) 
[Fri Mar 16 08:53:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 08:53:51 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 08:53:51 2012] Setting source spectrum file to fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 08:53:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 16 10:37:51 2012] Updating aperture counts using extracted products
[Fri Mar 16 10:37:51 2012] Error reading totcts from fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 10:37:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:37:53 2012] Using photon index=1.80, rate=0.00475, arf fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src4.arf
[Fri Mar 16 10:37:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:37:53 2012] Updating source flux to 1.5e-13