[Thu Mar 15 14:57:19 2012] Detection parameters:
  Position = (286.6, 318.9) = 0 57 21.91 -66 52 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2248.4 +/- 56.7
  Background counts = 39.3
  Rate = 0.05 +/- 0.001

[Thu Mar 15 14:57:23 2012] Off-axis axis estimate = 1.71'
[Thu Mar 15 18:44:47 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 18:44:47 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Mar 15 18:44:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Thu Mar 15 18:44:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Mar 15 20:43:04 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 15 20:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 20:43:04 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 15 20:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 20:43:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:43:04 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 15 20:43:04 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 15 20:43:04 2012] Fit fullrun_mos1_xmm0653880201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 15 22:36:21 2012] Spatial fit model total counts = 2332.000000, observed total counts = 2332.000000
[Thu Mar 15 22:36:21 2012] Offset between fit and detection position for source 1 = 0.209166 pixels
[Thu Mar 15 22:36:21 2012] 2340.413000 total counts/ 822.563000 bgd. counts: snr = 52.922977
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.209166 pixels
  Position = (286.4, 318.8) = 0 57 22.06 -66 52 58.7
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 1517.8 +/- 48.4
  Background counts = 822.6
  Rate = 0.03 +/- 0.001
[Thu Mar 15 22:36:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 22:36:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 22:36:21 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 22:36:21 2012] Source does appear to be extended
[Thu Mar 15 22:36:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 02:26:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 02:26:09 2012] Initial guess for spatial extent in simple fitting = 5.10"
[Fri Mar 16 02:26:09 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.803
[Fri Mar 16 02:26:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.10"
[Fri Mar 16 04:18:36 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 04:18:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 04:18:36 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 04:18:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 04:18:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 04:18:36 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 04:18:36 2012] fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 04:18:36 2012] Fit fullrun_mos1_xmm0653880201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 06:04:33 2012] Spatial fit model total counts = 2332.000000, observed total counts = 2332.000000
[Fri Mar 16 06:04:33 2012] Offset between fit and detection position for source 1 = 0.000003 pixels
[Fri Mar 16 06:04:33 2012] 2340.404000 total counts/ 822.344000 bgd. counts: snr = 52.937347
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000003 pixels
  Position = (286.4, 318.8) = 0 57 22.06 -66 52 58.7
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 1518.1 +/- 48.4
  Background counts = 822.3
  Rate = 0.03 +/- 0.001
[Fri Mar 16 06:04:33 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 06:04:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 06:04:33 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 06:04:33 2012] Source does appear to be extended
[Fri Mar 16 06:04:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 08:49:52 2012] Counts = 1518.060000, rescaling region sizes by 2.000000
[Fri Mar 16 08:49:52 2012] XMMSAS src. selection expression = ellipse(24865.367600, 27685.588200, 612.736818, 612.736818, 0.000000, X, Y)
[Fri Mar 16 08:49:52 2012] Writing source region out to fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 08:49:52 2012] Extracting stamp from image fullrun_mos1_xmm0653880201_pi300-10000_cl_sm2.00.img.gz, (251, 284) - (322, 354)
[Fri Mar 16 08:49:52 2012] XMMSAS bgd. selection expression = annulus(24865.367600, 27685.588200, 2042.456059, 4084.912118, X, Y) && !ellipse(20157.012375, 31377.738342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25600.437073, 32229.769104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20505.686000, 32547.858000, 1588.976046, 1588.976046, 0.000000, X, Y) && !ellipse(21729.368515, 26911.971100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20405.534000, 32302.348000, 1628.688047, 1628.688047, 0.000000, X, Y) && !ellipse(20001.872375, 31889.763397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.893494, 29821.253967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22732.450640, 29434.419200, 376.378411, 376.378411, 0.000000, X, Y) && !ellipse(22020.593369, 30363.649902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21208.030945, 32063.473999, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 08:49:52 2012] Writing fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 08:49:59 2012] Mean detx,y = (-2155.59, 554.88) 
[Fri Mar 16 08:50:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 08:50:22 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 08:50:23 2012] Setting source spectrum file to fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 08:50:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 10:37:51 2012] Updating aperture counts using extracted products
[Fri Mar 16 10:37:51 2012] Error reading totcts from fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 10:37:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:37:53 2012] Using photon index=1.80, rate=0.0343, arf fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 10:37:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:37:53 2012] Updating source flux to 3.6e-13
[Fri Mar 16 10:39:40 2012] Reading fit data from xmm0653880201/analysis//spectral/fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 16 10:39:40 2012] Spectral fit parameter nH value = 1.71403e+14
[Fri Mar 16 10:39:40 2012] Spectral fit parameter PhoIndex value = 1.78896
[Fri Mar 16 10:39:40 2012] Failed to get F(0.3-8.0) from xmm0653880201/analysis//spectral/fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 10:39:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:39:40 2012] Using Nh = 1.7e+14, photon index=1.79, rate=0.0343, arf fullrun_mos1_xmm0653880201_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 10:39:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:39:40 2012] Updating source flux to 3.6e-13