[Wed May  2 13:25:52 2012] Detection parameters:
  Position = (303.4, 320.9) = 12 35 36.94 -39 54 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3585.3 +/- 72.1
  Background counts = 9.2
  Rate = 0.2 +/- 0.004

[Wed May  2 13:25:53 2012] Off-axis axis estimate = 1.67'
[Wed May  2 15:26:39 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:26:39 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Wed May  2 15:26:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Wed May  2 15:26:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed May  2 15:59:36 2012] fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  2 15:59:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_src1.csv
[Wed May  2 15:59:36 2012] fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  2 15:59:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_src1.csv
[Wed May  2 15:59:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 15:59:36 2012] fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  2 15:59:36 2012] fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  2 15:59:36 2012] Fit fullrun_mos1_xmm0653870301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  2 16:31:16 2012] Spatial fit model total counts = 3162.000000, observed total counts = 3162.000000
[Wed May  2 16:31:16 2012] Offset between fit and detection position for source 1 = 0.146726 pixels
[Wed May  2 16:31:16 2012] 3166.299000 total counts/ 706.239000 bgd. counts: snr = 92.569912
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.146726 pixels
  Position = (303.2, 320.9) = 12 35 36.99 -39 54 35.3
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2460.1 +/- 56.3
  Background counts = 706.2
  Rate = 0.1 +/- 0.003
[Wed May  2 16:31:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 16:31:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 16:31:16 2012] Assessing source extent using major axis lower bound
[Wed May  2 16:31:16 2012] Source does appear to be extended
[Wed May  2 16:31:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:28 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Wed May  2 17:38:28 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.289
[Wed May  2 17:38:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Wed May  2 18:07:05 2012] fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_src1.ximg exists
[Wed May  2 18:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_src1.csv
[Wed May  2 18:07:05 2012] fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May  2 18:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_src1.csv
[Wed May  2 18:07:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 18:07:05 2012] fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May  2 18:07:05 2012] fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  2 18:07:05 2012] Fit fullrun_mos1_xmm0653870301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May  2 18:23:58 2012] Spatial fit model total counts = 3164.690000, observed total counts = 3162.000000
[Wed May  2 18:23:58 2012] Offset between fit and detection position for source 1 = 0.012377 pixels
[Wed May  2 18:23:58 2012] 3180.987000 total counts/ 718.527000 bgd. counts: snr = 91.864484
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012377 pixels
  Position = (303.2, 320.9) = 12 35 36.99 -39 54 35.4
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2462.5 +/- 56.4
  Background counts = 718.5
  Rate = 0.1 +/- 0.003
[Wed May  2 18:23:58 2012] Vigneting correction estimate = 1.000000
[Wed May  2 18:23:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 18:23:58 2012] Assessing source extent using major axis lower bound
[Wed May  2 18:23:58 2012] Source does appear to be extended
[Wed May  2 18:23:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 19:24:30 2012] Counts = 2462.460000, rescaling region sizes by 2.000000
[Wed May  2 19:24:30 2012] XMMSAS src. selection expression = ellipse(26333.666800, 27869.722420, 658.668019, 658.668019, 0.000000, X, Y)
[Wed May  2 19:24:30 2012] Writing source region out to fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1_src.reg
[Wed May  2 19:24:30 2012] Extracting stamp from image fullrun_mos1_xmm0653870301_pi300-10000_cl_sm2.00.img.gz, (265, 283) - (341, 359)
[Wed May  2 19:24:30 2012] XMMSAS bgd. selection expression = annulus(26333.666800, 27869.722420, 2195.560063, 4391.120126, X, Y) && !ellipse(23504.065800, 29388.181200, 380.234411, 380.234411, 0.000000, X, Y)
[Wed May  2 19:24:30 2012] Writing fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1.gif
[Wed May  2 19:24:34 2012] Mean detx,y = (283.39, -298.97) 
[Wed May  2 19:24:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 19:25:02 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 19:25:03 2012] Setting source spectrum file to fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  2 19:25:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  2 20:11:19 2012] Updating aperture counts using extracted products
[Wed May  2 20:11:19 2012] Error reading totcts from fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  2 20:11:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 20:11:19 2012] Using photon index=1.80, rate=0.148, arf fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1.arf
[Wed May  2 20:11:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 20:11:19 2012] Updating source flux to 1.5e-12
[Wed May  2 20:12:40 2012] Reading fit data from xmm0653870301/analysis//spectral/fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1_pl.csv
[Wed May  2 20:12:40 2012] Spectral fit parameter nH value = 4.00211e+12
[Wed May  2 20:12:40 2012] Spectral fit parameter PhoIndex value = -0.904284
[Wed May  2 20:12:40 2012] Failed to get F(0.3-8.0) from xmm0653870301/analysis//spectral/fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May  2 20:12:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 20:12:40 2012] Using Nh = 4e+12, photon index=-0.90, rate=0.148, arf fullrun_mos1_xmm0653870301_pi300-10000_pass1_cl_src1.arf
[Wed May  2 20:12:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 20:12:40 2012] Updating source flux to 5.1e-12