[Sat May  5 13:20:03 2012] Detection parameters:
  Position = (359.0, 347.1) = 15 1 44.33 -42 3 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9546.1 +/- 128.2
  Background counts = 842.6
  Rate = 0.1 +/- 0.002

[Sat May  5 13:21:13 2012] Off-axis axis estimate = 5.63'
[Sat May  5 14:13:30 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Sat May  5 14:13:30 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Sat May  5 14:13:30 2012] source mask rpix=2.1, npix_max = 27, mask sum = 32, frac = 1.161
[Sat May  5 14:13:30 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.24"
[Wed May  9 07:26:13 2012] fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_src15.ximg exists
[Wed May  9 07:26:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_src15.csv
[Wed May  9 07:26:14 2012] fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May  9 07:26:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_src15.csv
[Wed May  9 07:26:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 07:26:16 2012] fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May  9 07:26:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May  9 07:26:16 2012] fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May  9 07:26:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May  9 07:26:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 16:33:46 2012] Spatial fit model total counts = 53686.200000, observed total counts = 43301.000000
[Sat May 12 16:33:46 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 16:33:47 2012] Source 15 is offset by -1.206148 and 3.926908 pixels which is larger than
2 X fitted extent = 12.836966 x 2.027605, not incorporating fit results
[Sat May 12 16:33:48 2012] Vigneting correction estimate = 1.000000
[Sat May 12 16:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 16:33:48 2012] Assessing source extent using major
[Sat May 12 16:33:48 2012] Source does appear to be extended
[Sat May 12 16:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 16:36:56 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Sat May 12 16:36:56 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Sat May 12 16:36:56 2012] source mask rpix=2.1, npix_max = 27, mask sum = 32, frac = 1.161
[Sat May 12 16:36:56 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.24"
[Mon May 14 16:21:25 2012] fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 14 16:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_src15.csv
[Mon May 14 16:21:25 2012] fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 14 16:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_src15.csv
[Mon May 14 16:21:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 14 16:21:28 2012] fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 14 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 14 16:21:28 2012] fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 14 16:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 14 16:21:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653860101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes