[Sat May  5 13:21:29 2012] Detection parameters:
  Position = (391.7, 461.9) = 15 1 31.63 -41 55 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1039.2 +/- 50.2
  Background counts = 194.8
  Rate = 0.008 +/- 0.0004

[Sat May  5 13:22:18 2012] Off-axis axis estimate = 13.64'
[Wed May  9 07:26:18 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Wed May  9 07:26:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  9 07:26:18 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Wed May  9 07:26:18 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Wed May  9 07:26:18 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 13.25"
[Thu May 10 12:15:52 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src76.ximg exists
[Thu May 10 12:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src76.csv
[Thu May 10 12:15:52 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src76_1.ximg exists
[Thu May 10 12:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src76.csv
[Thu May 10 12:15:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 12:15:55 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Thu May 10 12:15:55 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Thu May 10 12:15:55 2012] Fit fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Sat May 12 16:34:24 2012] Spatial fit model total counts = 7329.850000, observed total counts = 7313.000000
[Sat May 12 16:34:24 2012] Offset between fit and detection position for source 57 = 4.426928 pixels
[Sat May 12 16:34:24 2012] 7012.360000 total counts/ 2867.910000 bgd. counts: snr = 77.389875
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 4.426928 pixels
  Position = (391.2, 457.5) = 15 1 31.79 -41 55 34.8
  Extent = 26.5 (26.5-53.0)", rotation angle = 0
  Source counts = 4144.4 +/- 83.7
  Background counts = 2867.9
  Rate = 0.03 +/- 0.0007
[Sat May 12 16:34:25 2012] Vigneting correction estimate = 1.000000
[Sat May 12 16:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 16:34:25 2012] Assessing source extent using major axis lower bound
[Sat May 12 16:34:25 2012] Source does appear to be extended
[Sat May 12 16:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 16:34:25 2012] Source is confused with source 152
[Sat May 12 16:34:25 2012] Source is confused with source 59
[Sat May 12 16:34:25 2012] Source is confused with source 63
[Sat May 12 16:34:25 2012] Source is confused with source 62
[Sat May 12 16:34:25 2012] Source is confused with source 159
[Sat May 12 16:34:25 2012] Source is confused with source 195
[Mon May 14 16:21:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 14 16:21:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 14 16:21:30 2012] Initial guess for spatial extent in simple fitting = 26.50"
[Mon May 14 16:21:30 2012] source mask rpix=6.1, npix_max = 173, mask sum = 169, frac = 0.972
[Mon May 14 16:21:30 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 26.50"