[Sat May  5 13:21:23 2012] Detection parameters:
  Position = (391.2, 438.0) = 15 1 31.79 -41 56 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1712.6 +/- 59.9
  Background counts = 264.8
  Rate = 0.03 +/- 0.0009

[Sat May  5 13:22:18 2012] Off-axis axis estimate = 12.15'
[Wed May  9 07:26:18 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Wed May  9 07:26:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  9 07:26:18 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Wed May  9 07:26:18 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Wed May  9 07:26:18 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 12.50"
[Thu May 10 12:15:51 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src29.ximg exists
[Thu May 10 12:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src29.csv
[Thu May 10 12:15:51 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu May 10 12:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src29.csv
[Thu May 10 12:15:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 12:15:54 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu May 10 12:15:54 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu May 10 12:15:54 2012] Fit fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat May 12 16:34:23 2012] Spatial fit model total counts = 11803.000000, observed total counts = 11803.000000
[Sat May 12 16:34:23 2012] Offset between fit and detection position for source 33 = 5.475857 pixels
[Sat May 12 16:34:23 2012] Warning, changing simple spatial fit ID from 29 to 28
[Sat May 12 16:34:23 2012] 10978.130000 total counts/ 6098.670000 bgd. counts: snr = 62.481895
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 5.475857 pixels
  Position = (393.5, 433.0) = 15 1 30.90 -41 57 21.4
  Extent = 24.6 (24.1-49.2)", rotation angle = 0
  Source counts = 4879.5 +/- 104.8
  Background counts = 6098.7
  Rate = 0.04 +/- 0.0008
[Sat May 12 16:34:25 2012] Vigneting correction estimate = 1.000000
[Sat May 12 16:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 16:34:25 2012] Assessing source extent using major axis lower bound
[Sat May 12 16:34:25 2012] Source does appear to be extended
[Sat May 12 16:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 16:34:25 2012] Source is confused with source 22
[Mon May 14 16:21:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 14 16:21:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 14 16:21:30 2012] Initial guess for spatial extent in simple fitting = 24.61"
[Mon May 14 16:21:30 2012] source mask rpix=5.7, npix_max = 151, mask sum = 156, frac = 1.028
[Mon May 14 16:21:30 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 24.61"