[Sat May  5 13:21:20 2012] Detection parameters:
  Position = (392.0, 408.0) = 15 1 31.48 -41 59 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3346.2 +/- 78.5
  Background counts = 306.4
  Rate = 0.04 +/- 0.001

[Sat May  5 13:22:18 2012] Off-axis axis estimate = 10.44'
[Wed May  9 07:26:18 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Wed May  9 07:26:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  9 07:26:18 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Wed May  9 07:26:18 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891
[Wed May  9 07:26:18 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.65"
[Thu May 10 12:15:50 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src13.ximg exists
[Thu May 10 12:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src13.csv
[Thu May 10 12:15:50 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu May 10 12:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src13.csv
[Thu May 10 12:15:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 12:15:53 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu May 10 12:15:53 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu May 10 12:15:53 2012] Fit fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat May 12 16:34:22 2012] Spatial fit model total counts = 16564.500000, observed total counts = 16526.000000
[Sat May 12 16:34:22 2012] Offset between fit and detection position for source 21 = 1.192973 pixels
[Sat May 12 16:34:22 2012] Warning, changing simple spatial fit ID from 13 to 12
[Sat May 12 16:34:22 2012] 14903.770000 total counts/ 3355.770000 bgd. counts: snr = 199.347449
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.192973 pixels
  Position = (391.5, 406.9) = 15 1 31.66 -41 59 15.0
  Extent = 22.8 (22.7-45.6)", rotation angle = 0
  Source counts = 11548.0 +/- 122.1
  Background counts = 3355.8
  Rate = 0.09 +/- 0.001
[Sat May 12 16:34:25 2012] Vigneting correction estimate = 1.000000
[Sat May 12 16:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 16:34:25 2012] Assessing source extent using major axis lower bound
[Sat May 12 16:34:25 2012] Source does appear to be extended
[Sat May 12 16:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 16:34:25 2012] Source is confused with source 13
[Mon May 14 16:21:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 14 16:21:30 2012] Initial guess for spatial extent in simple fitting = 22.82"
[Mon May 14 16:21:30 2012] source mask rpix=5.2, npix_max = 132, mask sum = 132, frac = 0.999
[Mon May 14 16:21:30 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 22.82"