[Sat May  5 13:21:18 2012] Detection parameters:
  Position = (390.0, 401.0) = 15 1 32.23 -41 59 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3575.2 +/- 81.3
  Background counts = 324.5
  Rate = 0.04 +/- 0.001

[Sat May  5 13:22:18 2012] Off-axis axis estimate = 9.97'
[Wed May  9 07:26:18 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Wed May  9 07:26:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  9 07:26:18 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Wed May  9 07:26:18 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Wed May  9 07:26:18 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.41"
[Thu May 10 12:15:50 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src12.ximg exists
[Thu May 10 12:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src12.csv
[Thu May 10 12:15:50 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu May 10 12:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src12.csv
[Thu May 10 12:15:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 12:15:53 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu May 10 12:15:53 2012] fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu May 10 12:15:53 2012] Fit fullrun_mos1_xmm0653860101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat May 12 16:34:22 2012] Warning, spatial fit 12 centroid is now closest to src. 21
[Sat May 12 16:34:22 2012] Spatial fit model total counts = 16042.300000, observed total counts = 16066.000000
[Sat May 12 16:34:22 2012] Offset between fit and detection position for source 13 = 1.818839 pixels
[Sat May 12 16:34:22 2012] Warning, changing simple spatial fit ID from 12 to 13
[Sat May 12 16:34:22 2012] 15230.430000 total counts/ 5064.130000 bgd. counts: snr = 142.859952
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.818839 pixels
  Position = (390.4, 402.7) = 15 1 32.07 -41 59 33.1
  Extent = 23.1 (22.7-23.3)", rotation angle = 0
  Source counts = 10166.3 +/- 123.4
  Background counts = 5064.1
  Rate = 0.08 +/- 0.001
[Sat May 12 16:34:25 2012] Vigneting correction estimate = 1.000000
[Sat May 12 16:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 16:34:25 2012] Assessing source extent using major axis lower bound
[Sat May 12 16:34:25 2012] Source does appear to be extended
[Sat May 12 16:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 16:34:25 2012] Source is confused with source 21
[Sat May 12 16:34:25 2012] Source is confused with source 37
[Mon May 14 16:21:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 14 16:21:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 14 16:21:30 2012] Initial guess for spatial extent in simple fitting = 23.08"
[Mon May 14 16:21:30 2012] source mask rpix=5.3, npix_max = 134, mask sum = 132, frac = 0.979
[Mon May 14 16:21:30 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 23.08"