[Sun Mar  4 10:34:01 2012] Detection parameters:
  Position = (380.8, 302.1) = 12 6 8.99 -7 45 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1148.2 +/- 44.5
  Background counts = 141.4
  Rate = 0.03 +/- 0.001

[Sun Mar  4 10:34:02 2012] Off-axis axis estimate = 5.98'
[Sun Mar  4 10:38:37 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 10:38:37 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Sun Mar  4 10:38:37 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.056
[Sun Mar  4 10:38:37 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.42"
[Sun Mar  4 12:37:50 2012] fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_src13.ximg exists
[Sun Mar  4 12:37:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_src13.csv
[Sun Mar  4 12:37:50 2012] fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Mar  4 12:37:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_src13.csv
[Sun Mar  4 12:37:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 12:37:51 2012] fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Mar  4 12:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Mar  4 12:37:51 2012] fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Mar  4 12:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Mar  4 12:37:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653770301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 15:09:58 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 17.240877 pixels away
[Sun Mar  4 15:09:58 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 15:09:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 15:09:58 2012] Assessing source extent using major
[Sun Mar  4 15:09:58 2012] Source does appear to be extended
[Sun Mar  4 15:09:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 15:10:31 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 15:10:31 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Sun Mar  4 15:10:31 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.056
[Sun Mar  4 15:10:31 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.42"
[Sun Mar  4 17:36:03 2012] fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_src13.ximg exists
[Sun Mar  4 17:36:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_src13.csv
[Sun Mar  4 17:36:03 2012] fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Mar  4 17:36:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_src13.csv
[Sun Mar  4 17:36:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 17:36:04 2012] fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Mar  4 17:36:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Mar  4 17:36:04 2012] fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Mar  4 17:36:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Mar  4 17:36:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653770301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 19:34:24 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.455536 pixels away
[Sun Mar  4 19:34:24 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 19:34:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 19:34:24 2012] Assessing source extent using major
[Sun Mar  4 19:34:24 2012] Source does appear to be extended
[Sun Mar  4 19:34:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 19:34:49 2012] Counts = 1148.193359, rescaling region sizes by 2.000000
[Sun Mar  4 19:34:49 2012] XMMSAS src. selection expression = ellipse(33082.166260, 26229.917969, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar  4 19:34:49 2012] Writing source region out to fullrun_pn_xmm0653770301_pi300-10000_pass1_cl_src15_src.reg
[Sun Mar  4 19:34:49 2012] Extracting stamp from image fullrun_pn_xmm0653770301_pi300-10000_cl_sm2.00.img.gz, (306, 227) - (456, 377)
[Sun Mar  4 19:34:49 2012] XMMSAS bgd. selection expression = annulus(33082.166260, 26229.917969, 4350.000000, 8700.000000, X, Y) && !ellipse(26260.275623, 27882.003551, 1046.015497, 825.721385, 15.212253, X, Y) && !ellipse(25533.572815, 32140.100800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34759.247375, 29392.238403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35161.794952, 28454.500641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27092.409546, 32817.422668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31966.037298, 30341.656600, 386.723211, 386.723211, 0.000000, X, Y) && !ellipse(25855.319885, 29056.058594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25472.815125, 28947.659058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24828.766083, 28752.368378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.386658, 28399.177795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25155.257690, 27946.999756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.021912, 27361.972015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27659.667175, 27100.175507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29000.606440, 26923.540800, 445.983213, 445.983213, 0.000000, X, Y) && !ellipse(26408.598000, 27000.012000, 1097.256032, 1097.256032, 0.000000, X, Y) && !ellipse(25683.552765, 27365.330627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.016357, 26492.603912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25033.232544, 26414.872620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25560.104523, 26135.914001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26111.370911, 25984.423340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29088.135460, 24332.444000, 435.910413, 435.910413, 0.000000, X, Y) && !ellipse(26808.041000, 23631.403000, 497.443214, 497.443214, 0.000000, X, Y) && !ellipse(35569.196800, 23013.594800, 923.904027, 923.904027, 0.000000, X, Y) && !ellipse(38120.928650, 22354.703583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28472.201600, 21882.990200, 643.009619, 643.009619, 0.000000, X, Y) && !ellipse(35839.002655, 18346.227966, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 19:34:49 2012] Writing fullrun_pn_xmm0653770301_pi300-10000_pass1_cl_src15.gif
[Sun Mar  4 19:49:21 2012] Mean detx,y = (5721.06, 3952.88) 
[Sun Mar  4 19:49:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 19:52:03 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 19:52:04 2012] Setting source spectrum file to fullrun_pn_xmm0653770301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Mar  4 19:52:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0653770301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Mar  4 20:31:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 20:31:36 2012] rmf not generated due to insufficient counts
[Sun Mar  4 22:46:17 2012] Updating aperture counts using extracted products
[Sun Mar  4 22:46:17 2012] Error reading totcts from fullrun_pn_xmm0653770301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Mar  4 22:46:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 22:46:18 2012] Using photon index=1.80, rate=0.0285, arf fullrun_pn_xmm0653770301_pi300-10000_pass1_cl_src15.arf
[Sun Mar  4 22:46:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 22:46:18 2012] Updating source flux to 8.4e-14
[Sun Mar  4 22:48:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting