[Thu Jun 13 22:34:59 2013] Detection parameters:
  Position = (239.2, 123.1) = 9 0 13.97 56 40 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.3 +/- 25.2
  Background counts = 177.1
  Rate = 0.004 +/- 0.0009

[Thu Jun 13 22:34:59 2013] Off-axis axis estimate = 13.42'
[Thu Jun 13 22:38:37 2013] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:38:37 2013] Initial guess for spatial extent in simple fitting = 13.14"
[Thu Jun 13 22:38:37 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.988
[Thu Jun 13 22:38:37 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 13.14"
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 13 23:16:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src9.csv
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 13 23:16:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src9.csv
[Thu Jun 13 23:16:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 13 23:16:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 13 23:16:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 13 23:16:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:43 2013] Spatial fit model total counts = 196.430000, observed total counts = 186.000000
[Fri Jun 14 00:30:43 2013] Offset between fit and detection position for source 9 = 1.281152 pixels
[Fri Jun 14 00:30:43 2013] Warning, changing simple spatial fit ID from 9 to 5
[Fri Jun 14 00:30:43 2013] 193.988850 total counts/ 192.633000 bgd. counts: snr = 0.097689
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.281152 pixels
  Position = (237.9, 123.1) = 9 0 14.65 56 40 34.3
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 1.4 +/- 13.9
  Background counts = 192.6
  Rate = 0.0001 +/- 0.001
  Deleting source due to low Poisson probability