[Thu Jun 13 22:34:59 2013] Detection parameters:
  Position = (372.7, 225.6) = 8 59 3.34 56 47 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.7 +/- 28.0
  Background counts = 290.7
  Rate = 0.02 +/- 0.002

[Thu Jun 13 22:34:59 2013] Off-axis axis estimate = 7.54'
[Thu Jun 13 22:38:37 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:38:37 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Thu Jun 13 22:38:37 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.927
[Thu Jun 13 22:38:37 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.20"
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 13 23:16:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 13 23:16:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 23:16:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 13 23:16:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 13 23:16:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 23:16:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:43 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.465412 pixels away
[Fri Jun 14 00:30:43 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:43 2013] Assessing source extent using major
[Fri Jun 14 00:30:43 2013] Source does appear to be extended
[Fri Jun 14 00:30:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 00:30:56 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 00:30:56 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Fri Jun 14 00:30:56 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.927
[Fri Jun 14 00:30:56 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.20"
[Fri Jun 14 01:11:19 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 14 01:11:19 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 14 01:11:19 2013] Fit fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun 14 01:11:19 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 14 01:11:19 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 14 01:11:19 2013] Fit fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 14 02:40:14 2013] Spatial fit model total counts = 266.234000, observed total counts = 244.000000
[Fri Jun 14 02:40:14 2013] Offset between fit and detection position for source 3 = 0.139504 pixels
[Fri Jun 14 02:40:14 2013] 267.218800 total counts/ 169.028000 bgd. counts: snr = 7.552513
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.139504 pixels
  Position = (372.7, 225.4) = 8 59 3.34 56 47 59.2
  Extent = 7.4 (5.5-10.2)" x 4.6 (3.4-6.0)", rotation angle = 327 (214-50) degrees
  Source counts = 98.2 +/- 16.3
  Background counts = 169.0
  Rate = 0.009 +/- 0.002
[Fri Jun 14 02:40:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 02:40:14 2013] Source does appear to be extended
[Fri Jun 14 02:40:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Fri Jun 14 02:40:30 2013] XMMSAS src. selection expression = ellipse(32377.310400, 19564.781600, 446.413813, 275.796008, 327.301498, X, Y)
[Fri Jun 14 02:40:30 2013] Writing source region out to fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 14 02:40:30 2013] Extracting stamp from image fullrun_pn_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (347, 200) - (398, 251)
[Fri Jun 14 02:40:30 2013] XMMSAS bgd. selection expression = annulus(32377.310400, 19564.781600, 744.023021, 1488.046043, X, Y)
[Fri Jun 14 02:40:30 2013] Writing fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src3.gif
[Fri Jun 14 02:41:43 2013] Mean detx,y = (2699.44, 9722.49) 
[Fri Jun 14 02:41:45 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 02:42:13 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 02:42:13 2013] Setting source spectrum file to fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 14 02:42:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 14 02:47:40 2013] Not generating rmf since there are only 98 counts
[Fri Jun 14 02:47:40 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:21:52 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:21:52 2013] Total counts from fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 126.00
[Fri Jun 14 03:21:52 2013] Total counts from fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 331.00
[Fri Jun 14 03:21:52 2013] Got source and background scale factors 379200.000000, 4173265.000000
[Fri Jun 14 03:21:52 2013] User source parameters:
  Position = (372.7, 225.4) = 8 59 3.34 56 47 59.2
  Extent = 7.4 (5.5-10.2)" x 4.6 (3.4-6.0)", rotation angle = 327 (214-50) degrees
  Source aperture counts = 95.9 +/- 12.3
  Background aperture counts = 30.1
  Rate = 0.009 +/- 0.001

[Fri Jun 14 03:21:54 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:21:54 2013] Using photon index=1.80, rate=0.00929, arf fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src3.arf
[Fri Jun 14 03:21:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:21:54 2013] Updating source flux to 5.4e-14
[Fri Jun 14 03:22:13 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 03:22:15 2013] xmm0653680101/analysis//spectral/fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete