[Thu Jun 13 22:34:59 2013] Detection parameters:
  Position = (229.5, 127.0) = 9 0 19.05 56 40 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.6 +/- 26.5
  Background counts = 183.9
  Rate = 0.005 +/- 0.0009

[Thu Jun 13 22:34:59 2013] Off-axis axis estimate = 13.40'
[Thu Jun 13 22:38:37 2013] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:38:37 2013] Initial guess for spatial extent in simple fitting = 13.13"
[Thu Jun 13 22:38:37 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Thu Jun 13 22:38:37 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.13"
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jun 13 23:16:57 2013] Fit fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_src10 appears to have run properly
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jun 13 23:16:57 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jun 13 23:16:57 2013] Fit fullrun_pn_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Jun 14 00:30:43 2013] Source 10 is offset by -4.478292 and 5.550027 pixels which is larger than
2 X fitted extent = 4.125619 x 1.742184, not incorporating fit results
[Fri Jun 14 00:30:43 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:43 2013] Assessing source extent using major
[Fri Jun 14 00:30:43 2013] Source does appear to be extended
[Fri Jun 14 00:30:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 00:30:43 2013] Source is confused with source 6
[Fri Jun 14 00:30:56 2013] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 00:30:56 2013] Initial guess for spatial extent in simple fitting = 13.13"
[Fri Jun 14 00:30:56 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Fri Jun 14 00:30:56 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 13.13"
[Fri Jun 14 01:11:19 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun 14 01:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src9.csv
[Fri Jun 14 01:11:19 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun 14 01:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src9.csv
[Fri Jun 14 01:11:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:11:19 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun 14 01:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Jun 14 01:11:19 2013] fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun 14 01:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Jun 14 01:11:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:14 2013] Warning, spatial fit 9 centroid is now closest to src. 5
[Fri Jun 14 02:40:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:14 2013] Assessing source extent using major
[Fri Jun 14 02:40:14 2013] Source does appear to be extended
[Fri Jun 14 02:40:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 02:40:30 2013] XMMSAS src. selection expression = ellipse(19921.662613, 10997.224358, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 02:40:30 2013] Writing source region out to fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun 14 02:40:30 2013] Extracting stamp from image fullrun_pn_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (192, 89) - (267, 164)
[Fri Jun 14 02:40:30 2013] XMMSAS bgd. selection expression = annulus(19921.662613, 10997.224358, 1087.500000, 2175.000000, X, Y) && !ellipse(21650.044205, 10658.127335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17698.056992, 11705.323990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19676.081696, 11646.617310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19346.615128, 10757.628540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21198.771530, 11090.039536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22073.320923, 10984.535309, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 02:40:30 2013] Writing fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src10.gif
[Fri Jun 14 02:44:59 2013] Mean detx,y = (-12043.01, 13314.61) 
[Fri Jun 14 02:45:02 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 02:45:20 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 02:45:20 2013] Setting source spectrum file to fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 14 02:45:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun 14 02:48:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 02:48:34 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:21:53 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:21:53 2013] Total counts from fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 90.00
[Fri Jun 14 03:21:53 2013] Total counts from fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 164.00
[Fri Jun 14 03:21:53 2013] Got source and background scale factors 1342514.000000, 884489.000000
[Fri Jun 14 03:21:53 2013] User source parameters:
  Position = (229.5, 127.0) = 9 0 19.05 56 40 51.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -158.9 +/- 10.5
  Background aperture counts = 248.9
  Rate = -0.02 +/- 0.001

[Fri Jun 14 03:21:53 2013] Updating counts from extracted products
[Fri Jun 14 03:21:53 2013] Set source signif. to -158.93/15.78 = -10.07
[Fri Jun 14 03:21:54 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:21:54 2013] Using photon index=1.80, rate=-0.015, arf fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src10.arf
[Fri Jun 14 03:21:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:21:54 2013] Updated flux is not positive, keeping original flux
[Fri Jun 14 03:22:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 03:22:15 2013] xmm0653680101/analysis//spectral/fullrun_pn_xmm0653680101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete