[Thu Jun 13 22:35:37 2013] Detection parameters:
  Position = (257.1, 374.8) = 9 0 4.67 56 58 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.0 +/- 14.6
  Background counts = 61.7
  Rate = 0.003 +/- 0.0007

[Thu Jun 13 22:35:38 2013] Off-axis axis estimate = 6.29'
[Thu Jun 13 23:24:54 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:24:54 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Thu Jun 13 23:24:54 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Thu Jun 13 23:24:54 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.58"
[Fri Jun 14 00:30:38 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src30.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src30.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:50 2013] Source 8 is offset by 8.924809 and 0.237075 pixels which is larger than
2 X fitted extent = 1.549200 x 1.549200, not incorporating fit results
[Fri Jun 14 00:30:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:50 2013] Assessing source extent using major
[Fri Jun 14 00:30:50 2013] Source does appear to be extended
[Fri Jun 14 00:30:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:20:49 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:20:49 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Fri Jun 14 01:20:49 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Fri Jun 14 01:20:49 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 9.58"
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src29.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src29.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src29.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:22 2013] Source 8 is offset by -6.503927 and -6.541588 pixels which is larger than
2 X fitted extent = 1.105983 x 1.105983, not incorporating fit results
[Fri Jun 14 02:40:22 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:22 2013] Assessing source extent using major
[Fri Jun 14 02:40:22 2013] Source does appear to be extended
[Fri Jun 14 02:40:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 02:57:25 2013] XMMSAS src. selection expression = ellipse(22320.910370, 32558.121887, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing source region out to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun 14 02:57:25 2013] Extracting stamp from image fullrun_mos2_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (220, 337) - (295, 412)
[Fri Jun 14 02:57:25 2013] XMMSAS bgd. selection expression = annulus(22320.910370, 32558.121887, 1087.500000, 2175.000000, X, Y) && !ellipse(21467.548111, 31083.850494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20527.532333, 32124.029907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19617.880798, 30753.078979, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src8.gif
[Fri Jun 14 03:06:02 2013] Mean detx,y = (2263.22, 5798.38) 
[Fri Jun 14 03:06:03 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 03:06:16 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 03:06:16 2013] Setting source spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun 14 03:06:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun 14 03:20:10 2013] Not generating rmf since there are only 61 counts
[Fri Jun 14 03:20:10 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:22:03 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:22:03 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 210.00
[Fri Jun 14 03:22:03 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 859.00
[Fri Jun 14 03:22:03 2013] Got source and background scale factors 1229128.000000, 6947560.000000
[Fri Jun 14 03:22:03 2013] User source parameters:
  Position = (257.1, 374.8) = 9 0 4.67 56 58 49.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 58.0 +/- 15.5
  Background aperture counts = 152.0
  Rate = 0.003 +/- 0.0007

[Fri Jun 14 03:22:03 2013] Updating counts from extracted products
[Fri Jun 14 03:22:03 2013] Set source signif. to 58.03/12.33 = 4.71
[Fri Jun 14 03:22:05 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:22:05 2013] Using photon index=1.80, rate=0.00268, arf fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src8.arf
[Fri Jun 14 03:22:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:22:05 2013] Updating source flux to 3.9e-14
[Fri Jun 14 03:22:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 03:22:13 2013] xmm0653680101/analysis//spectral/fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete