[Thu Jun 13 22:35:38 2013] Detection parameters:
  Position = (269.1, 230.3) = 8 59 58.21 56 48 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.6 +/- 13.6
  Background counts = 57.5
  Rate = 0.004 +/- 0.0007

[Thu Jun 13 22:35:38 2013] Off-axis axis estimate = 5.38'
[Thu Jun 13 23:24:54 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:24:54 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Thu Jun 13 23:24:54 2013] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.853
[Thu Jun 13 23:24:54 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.12"
[Fri Jun 14 00:30:38 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src18.ximg exists
[Fri Jun 14 00:30:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src18.csv
[Fri Jun 14 00:30:38 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Jun 14 00:30:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src18.csv
[Fri Jun 14 00:30:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:50 2013] Warning, spatial fit 18 centroid is now closest to src. 35
[Fri Jun 14 00:30:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:50 2013] Assessing source extent using major
[Fri Jun 14 00:30:50 2013] Source does appear to be extended
[Fri Jun 14 00:30:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 00:30:50 2013] Source is confused with source 35
[Fri Jun 14 01:20:49 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:20:49 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Fri Jun 14 01:20:49 2013] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.853
[Fri Jun 14 01:20:49 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.12"
[Fri Jun 14 02:40:10 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun 14 02:40:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src17.csv
[Fri Jun 14 02:40:10 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun 14 02:40:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src17.csv
[Fri Jun 14 02:40:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:22 2013] Warning, spatial fit 17 centroid is now closest to src. 35
[Fri Jun 14 02:40:22 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:22 2013] Assessing source extent using major
[Fri Jun 14 02:40:22 2013] Source does appear to be extended
[Fri Jun 14 02:40:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 02:57:25 2013] XMMSAS src. selection expression = ellipse(23364.764343, 19985.569168, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing source region out to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src34_src.reg
[Fri Jun 14 02:57:25 2013] Extracting stamp from image fullrun_mos2_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (232, 193) - (307, 268)
[Fri Jun 14 02:57:25 2013] XMMSAS bgd. selection expression = annulus(23364.764343, 19985.569168, 1087.500000, 2175.000000, X, Y) && !ellipse(22917.837952, 19886.677292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.897125, 21296.946548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22562.417145, 20551.557693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22122.129654, 21729.867661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23878.456757, 20291.858658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23101.985474, 21908.817963, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src34.gif
[Fri Jun 14 03:02:06 2013] Mean detx,y = (5683.98, -6164.78) 
[Fri Jun 14 03:02:07 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 03:02:27 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 03:02:28 2013] Setting source spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Jun 14 03:02:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri Jun 14 03:18:01 2013] Not generating rmf since there are only 69 counts
[Fri Jun 14 03:18:01 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:22:00 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:22:00 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 204.00
[Fri Jun 14 03:22:00 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src34_bgd.pi.gz = 801.00
[Fri Jun 14 03:22:00 2013] Got source and background scale factors 1059448.000000, 6853250.000000
[Fri Jun 14 03:22:00 2013] User source parameters:
  Position = (269.1, 230.3) = 8 59 58.21 56 48 18.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 80.2 +/- 15.3
  Background aperture counts = 123.8
  Rate = 0.004 +/- 0.0007

[Fri Jun 14 03:22:00 2013] Updating counts from extracted products
[Fri Jun 14 03:22:00 2013] Set source signif. to 80.17/11.13 = 7.20
[Fri Jun 14 03:22:05 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:22:05 2013] Using photon index=1.80, rate=0.0037, arf fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src34.arf
[Fri Jun 14 03:22:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:22:05 2013] Updating source flux to 5.8e-14
[Fri Jun 14 03:22:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 03:22:13 2013] xmm0653680101/analysis//spectral/fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete