[Thu Jun 13 22:35:38 2013] Detection parameters:
  Position = (275.0, 233.8) = 8 59 55.08 56 48 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.5 +/- 14.6
  Background counts = 59.5
  Rate = 0.003 +/- 0.0007

[Thu Jun 13 22:35:38 2013] Off-axis axis estimate = 4.98'
[Thu Jun 13 23:24:54 2013] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:24:54 2013] Initial guess for spatial extent in simple fitting = 8.92"
[Thu Jun 13 23:24:54 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.153
[Thu Jun 13 23:24:54 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 8.92"
[Fri Jun 14 00:30:38 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src29.ximg exists
[Fri Jun 14 00:30:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src29.csv
[Fri Jun 14 00:30:38 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Jun 14 00:30:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src29.csv
[Fri Jun 14 00:30:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:50 2013] Spatial fit model total counts = 332.309000, observed total counts = 276.000000
[Fri Jun 14 00:30:50 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 00:30:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:50 2013] Assessing source extent using major
[Fri Jun 14 00:30:50 2013] Source does appear to be extended
[Fri Jun 14 00:30:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 00:30:50 2013] Source is confused with source 34
[Fri Jun 14 01:20:49 2013] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:20:49 2013] Initial guess for spatial extent in simple fitting = 8.92"
[Fri Jun 14 01:20:49 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.153
[Fri Jun 14 01:20:49 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 8.92"
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src28.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src28.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src28.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:22 2013] Source 33 is offset by -4.574888 and -6.376176 pixels which is larger than
2 X fitted extent = 1.037885 x 8.202989, not incorporating fit results
[Fri Jun 14 02:40:22 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:22 2013] Assessing source extent using major
[Fri Jun 14 02:40:22 2013] Source does appear to be extended
[Fri Jun 14 02:40:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 02:57:25 2013] XMMSAS src. selection expression = ellipse(23878.456757, 20291.858658, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing source region out to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src33_src.reg
[Fri Jun 14 02:57:25 2013] Extracting stamp from image fullrun_mos2_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (238, 196) - (313, 271)
[Fri Jun 14 02:57:25 2013] XMMSAS bgd. selection expression = annulus(23878.456757, 20291.858658, 1087.500000, 2175.000000, X, Y) && !ellipse(22917.837952, 19886.677292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23364.764343, 19985.569168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.897125, 21296.946548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22562.417145, 20551.557693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22122.129654, 21729.867661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23101.985474, 21908.817963, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src33.gif
[Fri Jun 14 03:05:42 2013] Mean detx,y = (5078.07, -6097.70) 
[Fri Jun 14 03:05:44 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 03:05:59 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 03:05:59 2013] Setting source spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jun 14 03:05:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Jun 14 03:19:58 2013] Not generating rmf since there are only 61 counts
[Fri Jun 14 03:19:58 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:22:03 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:22:03 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 197.00
[Fri Jun 14 03:22:03 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 823.00
[Fri Jun 14 03:22:03 2013] Got source and background scale factors 1156634.000000, 6568501.000000
[Fri Jun 14 03:22:03 2013] User source parameters:
  Position = (275.0, 233.8) = 8 59 55.08 56 48 35.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 52.1 +/- 15.1
  Background aperture counts = 144.9
  Rate = 0.002 +/- 0.0007

[Fri Jun 14 03:22:03 2013] Updating counts from extracted products
[Fri Jun 14 03:22:03 2013] Set source signif. to 52.08/12.04 = 4.33
[Fri Jun 14 03:22:05 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:22:05 2013] Using photon index=1.80, rate=0.0024, arf fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src33.arf
[Fri Jun 14 03:22:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:22:05 2013] Updating source flux to 3.6e-14
[Fri Jun 14 03:22:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 03:22:13 2013] xmm0653680101/analysis//spectral/fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete