[Thu Jun 13 22:35:38 2013] Detection parameters:
  Position = (362.1, 268.8) = 8 59 8.92 56 51 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.5 +/- 14.8
  Background counts = 62.8
  Rate = 0.003 +/- 0.0006

[Thu Jun 13 22:35:38 2013] Off-axis axis estimate = 5.09'
[Thu Jun 13 23:24:54 2013] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:24:54 2013] Initial guess for spatial extent in simple fitting = 8.97"
[Thu Jun 13 23:24:54 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.951
[Thu Jun 13 23:24:54 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 8.97"
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src32.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src32.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src32.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:50 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.603670 pixels away
[Fri Jun 14 00:30:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:50 2013] Assessing source extent using major
[Fri Jun 14 00:30:50 2013] Source does appear to be extended
[Fri Jun 14 00:30:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:20:49 2013] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:20:49 2013] Initial guess for spatial extent in simple fitting = 8.97"
[Fri Jun 14 01:20:49 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.951
[Fri Jun 14 01:20:49 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 8.97"
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src31.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src31.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src31.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:22 2013] Source 27 is offset by -6.702830 and 0.835150 pixels which is larger than
2 X fitted extent = 1.031559 x 8.252506, not incorporating fit results
[Fri Jun 14 02:40:22 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:22 2013] Assessing source extent using major
[Fri Jun 14 02:40:22 2013] Source does appear to be extended
[Fri Jun 14 02:40:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 02:57:25 2013] XMMSAS src. selection expression = ellipse(31453.613770, 23333.533234, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing source region out to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src27_src.reg
[Fri Jun 14 02:57:25 2013] Extracting stamp from image fullrun_mos2_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (325, 231) - (400, 306)
[Fri Jun 14 02:57:25 2013] XMMSAS bgd. selection expression = annulus(31453.613770, 23333.533234, 1087.500000, 2175.000000, X, Y) && !ellipse(33225.340600, 24734.514800, 645.310419, 499.785614, 210.683000, X, Y) && !ellipse(29047.212036, 22160.517395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34119.074677, 24017.638702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33833.733200, 25723.118200, 1557.672045, 441.301613, 52.536900, X, Y) && !ellipse(32883.933807, 23546.238251, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src27.gif
[Fri Jun 14 03:06:32 2013] Mean detx,y = (-3085.63, -5977.74) 
[Fri Jun 14 03:06:33 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 03:06:46 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 03:06:46 2013] Setting source spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jun 14 03:06:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri Jun 14 03:20:24 2013] Not generating rmf since there are only 67 counts
[Fri Jun 14 03:20:24 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:22:04 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:22:04 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 215.00
[Fri Jun 14 03:22:04 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 1104.00
[Fri Jun 14 03:22:04 2013] Got source and background scale factors 1307816.000000, 8259628.000000
[Fri Jun 14 03:22:04 2013] User source parameters:
  Position = (362.1, 268.8) = 8 59 8.92 56 51 10.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.2 +/- 15.7
  Background aperture counts = 174.8
  Rate = 0.002 +/- 0.0007

[Fri Jun 14 03:22:04 2013] Updating counts from extracted products
[Fri Jun 14 03:22:04 2013] Set source signif. to 40.19/13.22 = 3.04
[Fri Jun 14 03:22:05 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:22:05 2013] Using photon index=1.80, rate=0.00185, arf fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src27.arf
[Fri Jun 14 03:22:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:22:06 2013] Updating source flux to 2.4e-14
[Fri Jun 14 03:22:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 03:22:13 2013] xmm0653680101/analysis//spectral/fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete