[Thu Jun 13 22:35:38 2013] Detection parameters:
  Position = (378.5, 271.2) = 8 59 0.20 56 51 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.7 +/- 13.8
  Background counts = 57.9
  Rate = 0.003 +/- 0.0006

[Thu Jun 13 22:35:38 2013] Off-axis axis estimate = 6.13'
[Thu Jun 13 23:24:54 2013] Using EEF radius (= 9.50 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:24:54 2013] Initial guess for spatial extent in simple fitting = 9.50"
[Thu Jun 13 23:24:54 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.834
[Thu Jun 13 23:24:54 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.50"
[Fri Jun 14 00:30:38 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src26.ximg exists
[Fri Jun 14 00:30:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src26.csv
[Fri Jun 14 00:30:38 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Jun 14 00:30:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src26.csv
[Fri Jun 14 00:30:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:50 2013] Source 24 is offset by -3.086876 and -2.229772 pixels which is larger than
2 X fitted extent = 2.040110 x 8.731311, not incorporating fit results
[Fri Jun 14 00:30:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:50 2013] Assessing source extent using major
[Fri Jun 14 00:30:50 2013] Source does appear to be extended
[Fri Jun 14 00:30:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:20:49 2013] Using EEF radius (= 9.50 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:20:49 2013] Initial guess for spatial extent in simple fitting = 9.50"
[Fri Jun 14 01:20:49 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.834
[Fri Jun 14 01:20:49 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.50"
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:22 2013] Source 24 is offset by -3.465795 and -2.598268 pixels which is larger than
2 X fitted extent = 2.085554 x 8.731311, not incorporating fit results
[Fri Jun 14 02:40:22 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:22 2013] Assessing source extent using major
[Fri Jun 14 02:40:22 2013] Source does appear to be extended
[Fri Jun 14 02:40:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 02:57:25 2013] XMMSAS src. selection expression = ellipse(32883.933807, 23546.238251, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing source region out to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src24_src.reg
[Fri Jun 14 02:57:25 2013] Extracting stamp from image fullrun_mos2_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (341, 234) - (416, 309)
[Fri Jun 14 02:57:25 2013] XMMSAS bgd. selection expression = annulus(32883.933807, 23546.238251, 1087.500000, 2175.000000, X, Y) && !ellipse(33225.340600, 24734.514800, 645.310419, 499.785614, 210.683000, X, Y) && !ellipse(34500.031555, 24493.228790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34119.074677, 24017.638702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33833.733200, 25723.118200, 1557.672045, 441.301613, 52.536900, X, Y) && !ellipse(31453.613770, 23333.533234, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src24.gif
[Fri Jun 14 03:04:54 2013] Mean detx,y = (-4522.38, -6197.53) 
[Fri Jun 14 03:04:55 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 03:05:07 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 03:05:07 2013] Setting source spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Jun 14 03:05:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Jun 14 03:19:20 2013] Not generating rmf since there are only 68 counts
[Fri Jun 14 03:19:20 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:22:02 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:22:02 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 175.00
[Fri Jun 14 03:22:02 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 784.00
[Fri Jun 14 03:22:02 2013] Got source and background scale factors 1107782.000000, 6146770.000000
[Fri Jun 14 03:22:02 2013] User source parameters:
  Position = (378.5, 271.2) = 8 59 0.20 56 51 16.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 33.7 +/- 14.3
  Background aperture counts = 141.3
  Rate = 0.002 +/- 0.0007

[Fri Jun 14 03:22:02 2013] Updating counts from extracted products
[Fri Jun 14 03:22:02 2013] Set source signif. to 33.71/11.89 = 2.84
[Fri Jun 14 03:22:05 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:22:05 2013] Using photon index=1.80, rate=0.00156, arf fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src24.arf
[Fri Jun 14 03:22:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:22:05 2013] Updating source flux to 2.3e-14
[Fri Jun 14 03:22:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 03:22:13 2013] xmm0653680101/analysis//spectral/fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete