[Thu Jun 13 22:35:38 2013] Detection parameters:
  Position = (244.4, 280.2) = 9 0 11.36 56 52 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.9 +/- 13.9
  Background counts = 53.8
  Rate = 0.003 +/- 0.0006

[Thu Jun 13 22:35:38 2013] Off-axis axis estimate = 4.14'
[Thu Jun 13 23:24:54 2013] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:24:54 2013] Initial guess for spatial extent in simple fitting = 8.50"
[Thu Jun 13 23:24:54 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Thu Jun 13 23:24:54 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.50"
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src33.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src33.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun 14 00:30:39 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun 14 00:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun 14 00:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:50 2013] Warning, spatial fit 33 centroid is now closest to src. 18
[Fri Jun 14 00:30:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:50 2013] Assessing source extent using major
[Fri Jun 14 00:30:50 2013] Source does appear to be extended
[Fri Jun 14 00:30:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:20:49 2013] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:20:49 2013] Initial guess for spatial extent in simple fitting = 8.50"
[Fri Jun 14 01:20:49 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Fri Jun 14 01:20:49 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.50"
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src32.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src32.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src32.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Jun 14 02:40:11 2013] fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Jun 14 02:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Jun 14 02:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:22 2013] Source 22 is offset by -1.561448 and -1.877822 pixels which is larger than
2 X fitted extent = 0.992166 x 0.992166, not incorporating fit results
[Fri Jun 14 02:40:22 2013] Warning, spatial fit 32 centroid is now closest to src. 18
[Fri Jun 14 02:40:22 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:22 2013] Assessing source extent using major
[Fri Jun 14 02:40:22 2013] Source does appear to be extended
[Fri Jun 14 02:40:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 02:57:25 2013] XMMSAS src. selection expression = ellipse(21212.201996, 24327.581512, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing source region out to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src22_src.reg
[Fri Jun 14 02:57:25 2013] Extracting stamp from image fullrun_mos2_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (207, 243) - (282, 318)
[Fri Jun 14 02:57:25 2013] XMMSAS bgd. selection expression = annulus(21212.201996, 24327.581512, 1087.500000, 2175.000000, X, Y) && !ellipse(20161.194046, 27099.952484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20690.513962, 25102.276581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.897125, 21296.946548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20755.209061, 25634.673676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22122.129654, 21729.867661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21344.820709, 23355.923096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21817.518143, 23496.865326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23101.985474, 21908.817963, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 02:57:25 2013] Writing fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src22.gif
[Fri Jun 14 03:06:50 2013] Mean detx,y = (6073.69, -1478.95) 
[Fri Jun 14 03:06:51 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 03:07:05 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 03:07:06 2013] Setting source spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jun 14 03:07:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Jun 14 03:20:31 2013] Not generating rmf since there are only 59 counts
[Fri Jun 14 03:20:31 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:22:04 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:22:04 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 202.00
[Fri Jun 14 03:22:04 2013] Total counts from fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 808.00
[Fri Jun 14 03:22:04 2013] Got source and background scale factors 1156478.000000, 7025979.000000
[Fri Jun 14 03:22:04 2013] User source parameters:
  Position = (244.4, 280.2) = 9 0 11.36 56 52 0.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 69.0 +/- 15.2
  Background aperture counts = 133.0
  Rate = 0.003 +/- 0.0007

[Fri Jun 14 03:22:04 2013] Updating counts from extracted products
[Fri Jun 14 03:22:04 2013] Set source signif. to 69.00/11.53 = 5.98
[Fri Jun 14 03:22:06 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:22:06 2013] Using photon index=1.80, rate=0.00318, arf fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src22.arf
[Fri Jun 14 03:22:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:22:06 2013] Updating source flux to 4.5e-14
[Fri Jun 14 03:22:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 03:22:13 2013] xmm0653680101/analysis//spectral/fullrun_mos2_xmm0653680101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete