[Thu Jun 13 22:35:15 2013] Detection parameters:
  Position = (439.2, 212.2) = 8 58 28.16 56 47 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.3 +/- 18.6
  Background counts = 80.5
  Rate = 0.004 +/- 0.0006

[Thu Jun 13 22:35:15 2013] Off-axis axis estimate = 11.97'
[Thu Jun 13 23:16:57 2013] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:16:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 23:16:57 2013] Initial guess for spatial extent in simple fitting = 12.41"
[Thu Jun 13 23:16:57 2013] source mask rpix=2.9, npix_max = 44, mask sum = 43, frac = 0.956
[Thu Jun 13 23:16:57 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 12.41"
[Thu Jun 13 23:24:54 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun 13 23:24:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 23:24:54 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun 13 23:24:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 23:24:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 23:24:54 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun 13 23:24:54 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun 13 23:24:54 2013] Fit fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun 14 00:30:44 2013] Spatial fit model total counts = 91.980300, observed total counts = 86.000000
[Fri Jun 14 00:30:44 2013] Offset between fit and detection position for source 8 = 0.273913 pixels
[Fri Jun 14 00:30:44 2013] 93.905800 total counts/ 56.625100 bgd. counts: snr = 4.954269
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.273913 pixels
  Position = (439.4, 212.3) = 8 58 28.03 56 47 1.0
  Extent = 6.7 (4.2-11.2)", rotation angle = 0
  Source counts = 37.3 +/- 9.7
  Background counts = 56.6
  Rate = 0.003 +/- 0.0007
[Fri Jun 14 00:30:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:44 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 00:30:44 2013] Source does appear to be extended
[Fri Jun 14 00:30:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:11:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:11:19 2013] Initial guess for spatial extent in simple fitting = 6.69"
[Fri Jun 14 01:11:19 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.963
[Fri Jun 14 01:11:19 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 6.69"
[Fri Jun 14 01:20:48 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun 14 01:20:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src7.csv
[Fri Jun 14 01:20:48 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun 14 01:20:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src7.csv
[Fri Jun 14 01:20:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:20:48 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun 14 01:20:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun 14 01:20:48 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun 14 01:20:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun 14 01:20:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:16 2013] Warning, spatial fit 7 centroid is now closest to src. 29
[Fri Jun 14 02:40:16 2013] Source 7 in spatial fitting is no longer close to this source
[Fri Jun 14 02:40:16 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:16 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 02:40:16 2013] Source does appear to be extended
[Fri Jun 14 02:40:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 02:51:43 2013] XMMSAS src. selection expression = ellipse(38183.181000, 18421.557360, 401.509282, 401.509282, 0.000000, X, Y)
[Fri Jun 14 02:51:43 2013] Writing source region out to fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun 14 02:51:43 2013] Extracting stamp from image fullrun_mos1_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (416, 189) - (463, 235)
[Fri Jun 14 02:51:43 2013] XMMSAS bgd. selection expression = annulus(38183.181000, 18421.557360, 669.182137, 1338.364274, X, Y)
[Fri Jun 14 02:51:43 2013] Writing fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src8.gif
[Fri Jun 14 02:52:57 2013] Mean detx,y = (-12739.43, 7456.85) 
[Fri Jun 14 02:52:58 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 02:53:09 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 02:53:10 2013] Setting source spectrum file to fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun 14 02:53:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun 14 02:57:13 2013] Not generating rmf since there are only 37 counts
[Fri Jun 14 02:57:13 2013] rmf not generated due to insufficient counts
[Fri Jun 14 03:21:56 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:21:56 2013] Total counts from fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 46.00
[Fri Jun 14 03:21:56 2013] Total counts from fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 69.00
[Fri Jun 14 03:21:56 2013] Got source and background scale factors 416564.000000, 1986487.000000
[Fri Jun 14 03:21:56 2013] User source parameters:
  Position = (439.4, 212.3) = 8 58 28.03 56 47 1.0
  Extent = 6.7 (4.2-11.2)", rotation angle = 0
  Source aperture counts = 31.5 +/- 7.8
  Background aperture counts = 14.5
  Rate = 0.002 +/- 0.0006

[Fri Jun 14 03:21:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:21:56 2013] Using photon index=1.80, rate=0.00264, arf fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src8.arf
[Fri Jun 14 03:21:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:21:57 2013] Updating source flux to 8.2e-14
[Fri Jun 14 03:22:07 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 03:22:10 2013] xmm0653680101/analysis//spectral/fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete