[Thu Jun 13 22:35:15 2013] Detection parameters:
  Position = (401.1, 360.8) = 8 58 48.05 56 57 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 395.9 +/- 26.7
  Background counts = 102.2
  Rate = 0.02 +/- 0.001

[Thu Jun 13 22:35:15 2013] Off-axis axis estimate = 8.71'
[Thu Jun 13 23:16:57 2013] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 23:16:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 23:16:57 2013] Initial guess for spatial extent in simple fitting = 10.78"
[Thu Jun 13 23:16:57 2013] source mask rpix=2.5, npix_max = 35, mask sum = 28, frac = 0.789
[Thu Jun 13 23:16:57 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.78"
[Thu Jun 13 23:24:54 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 13 23:24:54 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 13 23:24:54 2013] Fit fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Jun 13 23:24:54 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 13 23:24:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 23:24:54 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 13 23:24:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 23:24:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653680101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:44 2013] Spatial fit model total counts = 326.919000, observed total counts = 299.000000
[Fri Jun 14 00:30:44 2013] Offset between fit and detection position for source 1 = 0.691602 pixels
[Fri Jun 14 00:30:44 2013] 331.600000 total counts/ 191.779000 bgd. counts: snr = 10.096524
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.691602 pixels
  Position = (400.7, 360.3) = 8 58 48.31 56 57 45.5
  Extent = 7.0 (5.7-8.9)" x 4.7 (3.7-7.0)", rotation angle = 352 (324-33) degrees
  Source counts = 139.8 +/- 18.2
  Background counts = 191.8
  Rate = 0.01 +/- 0.001
[Fri Jun 14 00:30:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 00:30:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 00:30:44 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 00:30:44 2013] Source does appear to be extended
[Fri Jun 14 00:30:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.82
[Fri Jun 14 01:11:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:11:19 2013] Initial guess for spatial extent in simple fitting = 5.84"
[Fri Jun 14 01:11:19 2013] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.662
[Fri Jun 14 01:11:19 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Fri Jun 14 01:20:48 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 14 01:20:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 01:20:48 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 14 01:20:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 01:20:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:20:48 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 14 01:20:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 14 01:20:48 2013] fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 14 01:20:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 14 01:20:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653680101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 02:40:16 2013] Spatial fit model total counts = 270.070000, observed total counts = 240.000000
[Fri Jun 14 02:40:16 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 02:40:16 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 02:40:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 02:40:16 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 02:40:16 2013] Source does appear to be extended
[Fri Jun 14 02:40:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.82
[Fri Jun 14 02:51:43 2013] XMMSAS src. selection expression = ellipse(34808.481200, 31298.303400, 420.822012, 280.417208, 352.029343, X, Y)
[Fri Jun 14 02:51:43 2013] Writing source region out to fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 14 02:51:43 2013] Extracting stamp from image fullrun_mos1_xmm0653680101_pi300-10000_cl_sm2.00.img.gz, (376, 336) - (425, 384)
[Fri Jun 14 02:51:43 2013] XMMSAS bgd. selection expression = annulus(34808.481200, 31298.303400, 701.370020, 1402.740040, X, Y)
[Fri Jun 14 02:51:43 2013] Writing fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 14 02:51:45 2013] Mean detx,y = (476.42, 8856.47) 
[Fri Jun 14 02:51:46 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 02:52:02 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 02:52:02 2013] Setting source spectrum file to fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 14 02:52:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 14 03:21:54 2013] Updating aperture counts using extracted products
[Fri Jun 14 03:21:54 2013] Total counts from fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 156.00
[Fri Jun 14 03:21:54 2013] Total counts from fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 220.00
[Fri Jun 14 03:21:55 2013] Got source and background scale factors 310703.000000, 4155469.000000
[Fri Jun 14 03:21:55 2013] User source parameters:
  Position = (400.7, 360.3) = 8 58 48.31 56 57 45.5
  Extent = 7.0 (5.7-8.9)" x 4.7 (3.7-7.0)", rotation angle = 352 (324-33) degrees
  Source aperture counts = 139.6 +/- 13.5
  Background aperture counts = 16.4
  Rate = 0.01 +/- 0.001

[Fri Jun 14 03:21:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 03:21:56 2013] Using photon index=1.80, rate=0.00991, arf fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 14 03:21:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 03:21:56 2013] Updating source flux to 1.8e-13
[Fri Jun 14 03:22:07 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Jun 14 03:22:10 2013] xmm0653680101/analysis//spectral/fullrun_mos1_xmm0653680101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete