[Tue Jul 24 23:30:51 2012] Detection parameters:
  Position = (286.3, 288.9) = 13 2 55.70 -63 49 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.2 +/- 37.0
  Background counts = 593.0
  Rate = 0.01 +/- 0.002

[Tue Jul 24 23:30:51 2012] Off-axis axis estimate = 1.12'
[Tue Jul 24 23:36:46 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 23:36:46 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Tue Jul 24 23:36:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Tue Jul 24 23:36:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 6.99"
[Wed Jul 25 00:00:19 2012] fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 25 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_src4.csv
[Wed Jul 25 00:00:19 2012] fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 25 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_src4.csv
[Wed Jul 25 00:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:00:19 2012] fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 25 00:00:19 2012] fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 25 00:00:19 2012] Fit fullrun_pn_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jul 25 00:34:56 2012] Source 4 is offset by 2.877715 and -7.558139 pixels which is larger than
2 X fitted extent = 2.486529 x 2.486529, not incorporating fit results
[Wed Jul 25 00:34:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 00:34:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 00:34:56 2012] Assessing source extent using major
[Wed Jul 25 00:34:56 2012] Source does appear to be extended
[Wed Jul 25 00:34:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 00:35:01 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:35:01 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Wed Jul 25 00:35:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Wed Jul 25 00:35:01 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.99"
[Wed Jul 25 00:45:04 2012] fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 25 00:45:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_src4.csv
[Wed Jul 25 00:45:04 2012] fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 25 00:45:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_src4.csv
[Wed Jul 25 00:45:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:45:04 2012] fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 25 00:45:04 2012] fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 25 00:45:04 2012] Fit fullrun_pn_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul 25 01:22:24 2012] Source 4 is offset by -6.054790 and 5.292758 pixels which is larger than
2 X fitted extent = 4.637995 x 4.637995, not incorporating fit results
[Wed Jul 25 01:22:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 01:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 01:22:24 2012] Assessing source extent using major
[Wed Jul 25 01:22:24 2012] Source does appear to be extended
[Wed Jul 25 01:22:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 01:22:30 2012] XMMSAS src. selection expression = ellipse(24863.183228, 25082.955933, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 01:22:30 2012] Writing source region out to fullrun_pn_xmm0653640501_pi300-10000_pass1_cl_src4_src.reg
[Wed Jul 25 01:22:30 2012] Extracting stamp from image fullrun_pn_xmm0653640501_pi300-10000_cl_sm2.00.img.gz, (249, 251) - (324, 326)
[Wed Jul 25 01:22:30 2012] XMMSAS bgd. selection expression = annulus(24863.183228, 25082.955933, 1087.500000, 2175.000000, X, Y) && !ellipse(25924.327600, 23867.113400, 1360.533639, 1360.533639, 0.000000, X, Y) && !ellipse(24347.488000, 22322.424000, 1251.632036, 1251.632036, 0.000000, X, Y) && !ellipse(27115.914520, 24299.743530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.882690, 22066.173584, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 01:22:30 2012] Writing fullrun_pn_xmm0653640501_pi300-10000_pass1_cl_src4.gif
[Wed Jul 25 01:35:55 2012] Mean detx,y = (273.59, 1340.03) 
[Wed Jul 25 01:36:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 01:36:09 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 01:36:09 2012] Setting source spectrum file to fullrun_pn_xmm0653640501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul 25 01:36:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0653640501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jul 25 02:14:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 02:14:23 2012] rmf not generated due to insufficient counts
[Wed Jul 25 03:07:48 2012] Updating aperture counts using extracted products
[Wed Jul 25 03:07:48 2012] Error reading totcts from fullrun_pn_xmm0653640501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul 25 03:07:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 03:07:49 2012] Using photon index=1.80, rate=0.0115, arf fullrun_pn_xmm0653640501_pi300-10000_pass1_cl_src4.arf
[Wed Jul 25 03:07:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 03:07:49 2012] Updating source flux to 2.9e-14
[Wed Jul 25 03:08:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting