[Tue Jul 24 23:31:20 2012] Detection parameters:
  Position = (289.1, 270.9) = 13 2 53.91 -63 50 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.4 +/- 17.9
  Background counts = 67.9
  Rate = 0.004 +/- 0.0009

[Tue Jul 24 23:31:21 2012] Off-axis axis estimate = 2.11'
[Wed Jul 25 00:08:24 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:08:24 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Jul 25 00:08:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.710
[Wed Jul 25 00:08:24 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.48"
[Wed Jul 25 00:34:55 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src8.ximg exists
[Wed Jul 25 00:34:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src8.csv
[Wed Jul 25 00:34:55 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Jul 25 00:34:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src8.csv
[Wed Jul 25 00:34:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:34:55 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Jul 25 00:34:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jul 25 00:34:55 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Jul 25 00:34:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jul 25 00:34:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:34:58 2012] Source 7 is offset by 2.074891 and 5.901093 pixels which is larger than
2 X fitted extent = 1.375678 x 1.375678, not incorporating fit results
[Wed Jul 25 00:34:58 2012] Source 7 is offset by 3.464891 and 5.776702 pixels which is larger than
2 X fitted extent = 0.860129 x 0.860129, not incorporating fit results
[Wed Jul 25 00:34:58 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 00:34:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 00:34:58 2012] Assessing source extent using major
[Wed Jul 25 00:34:58 2012] Source does appear to be extended
[Wed Jul 25 00:34:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 00:34:58 2012] Source is confused with source 8
[Wed Jul 25 00:51:22 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:51:22 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Jul 25 00:51:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.710
[Wed Jul 25 00:51:22 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.48"
[Wed Jul 25 01:22:22 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src8.ximg exists
[Wed Jul 25 01:22:22 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Jul 25 01:22:22 2012] Fit fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src8 appears to have run properly
[Wed Jul 25 01:22:22 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Jul 25 01:22:22 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Jul 25 01:22:22 2012] Fit fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Jul 25 01:22:26 2012] Source 7 is offset by -6.811523 and -4.243550 pixels which is larger than
2 X fitted extent = 1.711738 x 2.300966, not incorporating fit results
[Wed Jul 25 01:22:26 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 01:22:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 01:22:26 2012] Assessing source extent using major
[Wed Jul 25 01:22:26 2012] Source does appear to be extended
[Wed Jul 25 01:22:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 02:39:27 2012] XMMSAS src. selection expression = ellipse(25100.545502, 23519.425110, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 02:39:27 2012] Writing source region out to fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src7_src.reg
[Wed Jul 25 02:39:27 2012] Extracting stamp from image fullrun_mos2_xmm0653640501_pi300-10000_cl_sm2.00.img.gz, (252, 233) - (327, 308)
[Wed Jul 25 02:39:27 2012] XMMSAS bgd. selection expression = annulus(25100.545502, 23519.425110, 1087.500000, 2175.000000, X, Y) && !ellipse(25910.790000, 23873.206800, 1249.576836, 1249.576836, 0.000000, X, Y) && !ellipse(25481.855499, 23151.310608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24362.138000, 23977.444460, 1177.936034, 1177.936034, 0.000000, X, Y)
[Wed Jul 25 02:39:27 2012] Writing fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src7.gif
[Wed Jul 25 02:45:16 2012] Mean detx,y = (-451.61, -45.89) 
[Wed Jul 25 02:45:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 02:45:32 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 02:45:32 2012] Setting source spectrum file to fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 25 02:45:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jul 25 02:51:35 2012] Not generating rmf since there are only 85 counts
[Wed Jul 25 02:51:35 2012] rmf not generated due to insufficient counts
[Wed Jul 25 03:07:49 2012] Updating aperture counts using extracted products
[Wed Jul 25 03:07:49 2012] Error reading totcts from fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 25 03:07:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 03:07:49 2012] Using photon index=1.80, rate=0.00446, arf fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src7.arf
[Wed Jul 25 03:07:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 03:07:49 2012] Updating source flux to 5e-14
[Wed Jul 25 03:08:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting