[Tue Jul 24 23:31:20 2012] Detection parameters:
  Position = (298.3, 275.0) = 13 2 47.81 -63 50 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25449.8 +/- 188.9
  Background counts = 72.0
  Rate = 1 +/- 0.008

[Tue Jul 24 23:31:21 2012] Off-axis axis estimate = 1.70'
[Wed Jul 25 00:08:24 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:08:24 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jul 25 00:08:24 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Wed Jul 25 00:08:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jul 25 00:34:55 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 00:34:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 00:34:55 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 00:34:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 00:34:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:34:55 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 00:34:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 00:34:55 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 00:34:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 00:34:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653640501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:34:58 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Wed Jul 25 00:34:58 2012] Spatial fit model total counts = 4846.130000, observed total counts = 5556.000000
[Wed Jul 25 00:34:58 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 00:34:58 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 00:34:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 00:34:58 2012] Assessing source extent using major
[Wed Jul 25 00:34:58 2012] Source does appear to be extended
[Wed Jul 25 00:34:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 00:51:22 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:51:22 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jul 25 00:51:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Wed Jul 25 00:51:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Wed Jul 25 01:22:22 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 01:22:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 01:22:22 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 01:22:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 01:22:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 01:22:22 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 01:22:22 2012] fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 01:22:22 2012] Fit fullrun_mos2_xmm0653640501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 01:22:26 2012] Spatial fit model total counts = 18906.000000, observed total counts = 18429.000000
[Wed Jul 25 01:22:26 2012] Offset between fit and detection position for source 1 = 0.042470 pixels
[Wed Jul 25 01:22:26 2012] 18873.350000 total counts/ 4741.550000 bgd. counts: snr = 205.228332
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.042470 pixels
  Position = (298.4, 275.0) = 13 2 47.79 -63 50 8.7
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 14131.8 +/- 137.4
  Background counts = 4741.6
  Rate = 0.7 +/- 0.007
[Wed Jul 25 01:22:26 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 01:22:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 01:22:26 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 01:22:26 2012] Source does appear to be extended
[Wed Jul 25 01:22:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 02:39:27 2012] Counts = 14131.800000, rescaling region sizes by 3.000000
[Wed Jul 25 02:39:27 2012] XMMSAS src. selection expression = ellipse(25910.790000, 23873.206800, 937.182627, 937.182627, 0.000000, X, Y)
[Wed Jul 25 02:39:27 2012] Writing source region out to fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 25 02:39:27 2012] Extracting stamp from image fullrun_mos2_xmm0653640501_pi300-10000_cl_sm2.00.img.gz, (245, 221) - (352, 329)
[Wed Jul 25 02:39:27 2012] XMMSAS bgd. selection expression = annulus(25910.790000, 23873.206800, 4685.913135, 9371.826270, X, Y) && !ellipse(32383.394409, 14299.215927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16718.734833, 15937.152618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18279.557526, 17372.441544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21545.344640, 32836.694000, 510.556015, 510.556015, 0.000000, X, Y) && !ellipse(36128.472534, 29110.085785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25481.855499, 23151.310608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25100.545502, 23519.425110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24362.138000, 23977.444460, 1177.936034, 1177.936034, 0.000000, X, Y)
[Wed Jul 25 02:39:27 2012] Writing fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1.gif
[Wed Jul 25 02:39:32 2012] Mean detx,y = (69.61, 71.42) 
[Wed Jul 25 02:39:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 02:41:34 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 02:41:34 2012] Setting source spectrum file to fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 02:41:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 25 03:07:49 2012] Updating aperture counts using extracted products
[Wed Jul 25 03:07:49 2012] Error reading totcts from fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 03:07:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 03:07:49 2012] Using photon index=1.80, rate=0.731, arf fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 03:07:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 03:07:49 2012] Updating source flux to 7.7e-12
[Wed Jul 25 03:08:33 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jul 25 03:08:59 2012] Reading fit data from xmm0653640501/analysis//spectral/fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 25 03:08:59 2012] Spectral fit parameter nH value = 4.65814e+21
[Wed Jul 25 03:08:59 2012] Spectral fit parameter PhoIndex value = 1.51922
[Wed Jul 25 03:08:59 2012] Failed to get F(0.3-8.0) from xmm0653640501/analysis//spectral/fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 03:08:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 03:08:59 2012] Using Nh = 4.7e+21, photon index=1.52, rate=0.731, arf fullrun_mos2_xmm0653640501_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 03:08:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 03:08:59 2012] Updating source flux to 1.2e-11