[Thu Jun 13 15:36:26 2013] Detection parameters:
  Position = (323.6, 283.6) = 18 21 36.69 -27 34 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.2 +/- 17.3
  Background counts = 74.1
  Rate = 0.002 +/- 0.0002

[Thu Jun 13 15:36:26 2013] Off-axis axis estimate = 2.12'
[Thu Jun 13 16:59:18 2013] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 16:59:18 2013] Initial guess for spatial extent in simple fitting = 7.49"
[Thu Jun 13 16:59:18 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.266
[Thu Jun 13 16:59:18 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.49"
[Thu Jun 13 17:37:01 2013] fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun 13 17:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_src21.csv
[Thu Jun 13 17:37:01 2013] fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun 13 17:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_src21.csv
[Thu Jun 13 17:37:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:37:01 2013] fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun 13 17:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 13 17:37:01 2013] fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun 13 17:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 13 17:37:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:37:23 2013] Warning, spatial fit 21 centroid is now closest to src. 25
[Thu Jun 13 17:37:23 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:37:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:37:23 2013] Assessing source extent using major
[Thu Jun 13 17:37:23 2013] Source does appear to be extended
[Thu Jun 13 17:37:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 18:51:56 2013] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 18:51:56 2013] Initial guess for spatial extent in simple fitting = 7.49"
[Thu Jun 13 18:51:56 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.266
[Thu Jun 13 18:51:56 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 7.49"
[Thu Jun 13 19:26:21 2013] fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 13 19:26:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_src21.csv
[Thu Jun 13 19:26:21 2013] fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 13 19:26:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_src21.csv
[Thu Jun 13 19:26:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 19:26:22 2013] fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 13 19:26:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 13 19:26:22 2013] fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 13 19:26:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 13 19:26:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 19:26:39 2013] Warning, spatial fit 21 centroid is now closest to src. 25
[Thu Jun 13 19:26:39 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 19:26:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 19:26:39 2013] Assessing source extent using major
[Thu Jun 13 19:26:39 2013] Source does appear to be extended
[Thu Jun 13 19:26:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 21:35:24 2013] XMMSAS src. selection expression = ellipse(28108.927338, 24626.936066, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 21:35:24 2013] Writing source region out to fullrun_mos2_xmm0653550301_pi300-10000_pass1_cl_src26_src.reg
[Thu Jun 13 21:35:24 2013] Extracting stamp from image fullrun_mos2_xmm0653550301_pi300-10000_cl_sm2.00.img.gz, (286, 246) - (361, 321)
[Thu Jun 13 21:35:24 2013] XMMSAS bgd. selection expression = annulus(28108.927338, 24626.936066, 1087.500000, 2175.000000, X, Y) && !ellipse(27104.508514, 27594.672058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.318634, 25007.109711, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 21:35:24 2013] Writing fullrun_mos2_xmm0653550301_pi300-10000_pass1_cl_src26.gif
[Thu Jun 13 21:40:45 2013] Mean detx,y = (-1094.41, -2793.93) 
[Thu Jun 13 21:40:46 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 21:41:01 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 21:41:02 2013] Setting source spectrum file to fullrun_mos2_xmm0653550301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jun 13 21:41:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653550301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jun 13 21:56:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 21:56:27 2013] rmf not generated due to insufficient counts
[Thu Jun 13 22:07:13 2013] Updating aperture counts using extracted products
[Thu Jun 13 22:07:13 2013] Total counts from fullrun_mos2_xmm0653550301_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 435.00
[Thu Jun 13 22:07:13 2013] Total counts from fullrun_mos2_xmm0653550301_pi300-10000_pass1_cl_src26_bgd.pi.gz = 1654.00
[Thu Jun 13 22:07:13 2013] Got source and background scale factors 1067754.000000, 5008974.000000
[Thu Jun 13 22:07:13 2013] User source parameters:
  Position = (323.6, 283.6) = 18 21 36.69 -27 34 4.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 82.4 +/- 21.9
  Background aperture counts = 352.6
  Rate = 0.001 +/- 0.0003

[Thu Jun 13 22:07:13 2013] Updating counts from extracted products
[Thu Jun 13 22:07:13 2013] Set source signif. to 82.42/18.78 = 4.39
[Thu Jun 13 22:07:16 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 22:07:16 2013] Using photon index=1.80, rate=0.000968, arf fullrun_mos2_xmm0653550301_pi300-10000_pass1_cl_src26.arf
[Thu Jun 13 22:07:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 22:07:16 2013] Updating source flux to 1.1e-14
[Thu Jun 13 22:07:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 22:07:24 2013] xmm0653550301/analysis//spectral/fullrun_mos2_xmm0653550301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete