[Thu Jun 13 15:36:09 2013] Detection parameters:
  Position = (385.0, 401.4) = 18 21 16.67 -27 25 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.9 +/- 14.3
  Background counts = 61.4
  Rate = 0.0007 +/- 0.0002

[Thu Jun 13 15:36:09 2013] Off-axis axis estimate = 9.75'
[Thu Jun 13 16:34:55 2013] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 16:34:55 2013] Initial guess for spatial extent in simple fitting = 11.30"
[Thu Jun 13 16:34:55 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Thu Jun 13 16:34:55 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 11.30"
[Thu Jun 13 16:59:18 2013] fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_src24.ximg exists
[Thu Jun 13 16:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_src24.csv
[Thu Jun 13 16:59:18 2013] fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Jun 13 16:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_src24.csv
[Thu Jun 13 16:59:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:59:18 2013] fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Jun 13 16:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu Jun 13 16:59:18 2013] fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Jun 13 16:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu Jun 13 16:59:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653550301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 17:37:17 2013] Warning, spatial fit 11 centroid is now closest to src. 11
[Thu Jun 13 17:37:17 2013] Source 13 is offset by -7.350504 and -4.230718 pixels which is larger than
2 X fitted extent = 1.303009 x 1.303009, not incorporating fit results
[Thu Jun 13 17:37:17 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 17:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 17:37:17 2013] Assessing source extent using major
[Thu Jun 13 17:37:17 2013] Source does appear to be extended
[Thu Jun 13 17:37:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 18:28:42 2013] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 18:28:42 2013] Initial guess for spatial extent in simple fitting = 11.30"
[Thu Jun 13 18:28:42 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Thu Jun 13 18:28:42 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 11.30"
[Thu Jun 13 18:51:56 2013] fullrun_mos1_xmm0653550301_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jun 13 18:51:56 2013] fullrun_mos1_xmm0653550301_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jun 13 18:51:56 2013] Fit fullrun_mos1_xmm0653550301_pi300-10000_cl_pass1_src23 appears to have run properly
[Thu Jun 13 18:51:56 2013] fullrun_mos1_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jun 13 18:51:56 2013] fullrun_mos1_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jun 13 18:51:56 2013] Fit fullrun_mos1_xmm0653550301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Jun 13 19:26:34 2013] Warning, spatial fit 11 centroid is now closest to src. 11
[Thu Jun 13 19:26:35 2013] Spatial fit model total counts = 497.121000, observed total counts = 479.000000
[Thu Jun 13 19:26:35 2013] Offset between fit and detection position for source 13 = 1.023607 pixels
[Thu Jun 13 19:26:35 2013] 478.042500 total counts/ 399.127000 bgd. counts: snr = 3.950088
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.023607 pixels
  Position = (385.8, 400.7) = 18 21 16.41 -27 25 35.0
  Extent = 14.7 (9.7-22.6)" x 3.3 (2.8-4.5)", rotation angle = 92 (86-99) degrees
  Source counts = 78.9 +/- 21.9
  Background counts = 399.1
  Rate = 0.0009 +/- 0.0003
[Thu Jun 13 19:26:35 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 19:26:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 19:26:35 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 19:26:35 2013] Source does appear to be extended
[Thu Jun 13 19:26:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.16
[Thu Jun 13 19:26:35 2013] Source is asymmetric
[Thu Jun 13 21:12:11 2013] XMMSAS src. selection expression = ellipse(33511.879400, 34814.284400, 879.804025, 199.885806, 91.563502, X, Y)
[Thu Jun 13 21:12:11 2013] Writing source region out to fullrun_mos1_xmm0653550301_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun 13 21:12:11 2013] Extracting stamp from image fullrun_mos1_xmm0653550301_pi300-10000_cl_sm2.00.img.gz, (335, 350) - (436, 451)
[Thu Jun 13 21:12:11 2013] XMMSAS bgd. selection expression = annulus(33511.879400, 34814.284400, 1466.340042, 2932.680084, X, Y) && !ellipse(31050.423676, 36713.017059, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 21:12:11 2013] Writing fullrun_mos1_xmm0653550301_pi300-10000_pass1_cl_src13.gif
[Thu Jun 13 21:17:53 2013] Mean detx,y = (7705.45, 5923.82) 
[Thu Jun 13 21:17:55 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 21:18:09 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 21:18:09 2013] Setting source spectrum file to fullrun_mos1_xmm0653550301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 13 21:18:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0653550301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun 13 21:35:19 2013] Not generating rmf since there are only 78 counts
[Thu Jun 13 21:35:19 2013] rmf not generated due to insufficient counts
[Thu Jun 13 22:07:10 2013] Updating aperture counts using extracted products
[Thu Jun 13 22:07:10 2013] Total counts from fullrun_mos1_xmm0653550301_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 185.00
[Thu Jun 13 22:07:10 2013] Total counts from fullrun_mos1_xmm0653550301_pi300-10000_pass1_cl_src13_bgd.pi.gz = 3857.00
[Thu Jun 13 22:07:10 2013] Got source and background scale factors 455456.000000, 14189759.000000
[Thu Jun 13 22:07:10 2013] User source parameters:
  Position = (385.8, 400.7) = 18 21 16.41 -27 25 35.0
  Extent = 14.7 (9.7-22.6)" x 3.3 (2.8-4.5)", rotation angle = 92 (86-99) degrees
  Source aperture counts = 61.2 +/- 14.6
  Background aperture counts = 123.8
  Rate = 0.0007 +/- 0.0002

[Thu Jun 13 22:07:10 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 22:07:10 2013] Using photon index=1.80, rate=0.000936, arf fullrun_mos1_xmm0653550301_pi300-10000_pass1_cl_src13.arf
[Thu Jun 13 22:07:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 22:07:10 2013] Updating source flux to 2.1e-14
[Thu Jun 13 22:07:18 2013] Flag b found in src. 13 procflags, skipping spectral fitting
[Thu Jun 13 22:07:18 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 22:07:21 2013] xmm0653550301/analysis//spectral/fullrun_mos1_xmm0653550301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete