[Sat Feb 25 12:53:45 2012] Detection parameters:
  Position = (438.7, 129.2) = 7 7 29.97 -49 44 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.1 +/- 24.2
  Background counts = 162.7
  Rate = 0.001 +/- 0.0002

[Sat Feb 25 12:53:46 2012] Off-axis axis estimate = 15.94'
[Sat Feb 25 13:07:28 2012] Using EEF radius (= 14.40 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 13:07:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 13:07:28 2012] Initial guess for spatial extent in simple fitting = 14.40"
[Sat Feb 25 13:07:28 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.103
[Sat Feb 25 13:07:28 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 14.40"
[Sat Feb 25 15:32:38 2012] fullrun_pn_xmm0653510501_pi300-10000_cl_pass0_src16.ximg exists
[Sat Feb 25 15:32:38 2012] fullrun_pn_xmm0653510501_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Feb 25 15:32:38 2012] Fit fullrun_pn_xmm0653510501_pi300-10000_cl_pass0_src16 appears to have run properly
[Sat Feb 25 15:32:39 2012] fullrun_pn_xmm0653510501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Feb 25 15:32:39 2012] fullrun_pn_xmm0653510501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Feb 25 15:32:39 2012] Fit fullrun_pn_xmm0653510501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Feb 25 19:13:19 2012] Spatial fit model total counts = 1546.720000, observed total counts = 1565.000000
[Sat Feb 25 19:13:19 2012] Offset between fit and detection position for source 20 = 5.491485 pixels
[Sat Feb 25 19:13:19 2012] 1573.867000 total counts/ 450.977000 bgd. counts: snr = 52.876173
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 5.491485 pixels
  Position = (443.4, 126.4) = 7 7 27.84 -49 44 33.0
  Extent = 28.8 (28.8-28.8)", rotation angle = 0
  Source counts = 1122.9 +/- 39.7
  Background counts = 451.0
  Rate = 0.01 +/- 0.0004
[Sat Feb 25 19:13:19 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 19:13:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 19:13:19 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 19:13:19 2012] Source does appear to be extended
[Sat Feb 25 19:13:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:13:19 2012] Source is confused with source 14
[Sat Feb 25 19:14:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 19:14:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 19:14:03 2012] Initial guess for spatial extent in simple fitting = 28.77"
[Sat Feb 25 19:14:03 2012] source mask rpix=6.6, npix_max = 202, mask sum = 182, frac = 0.899
[Sat Feb 25 19:14:03 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 28.77"
[Sat Feb 25 22:29:44 2012] fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_src16.ximg exists
[Sat Feb 25 22:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_src16.csv
[Sat Feb 25 22:29:44 2012] fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Feb 25 22:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_src16.csv
[Sat Feb 25 22:29:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 22:29:44 2012] fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Feb 25 22:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat Feb 25 22:29:44 2012] fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Feb 25 22:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat Feb 25 22:29:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 01:32:22 2012] Spatial fit model total counts = 1274.930000, observed total counts = 3264.000000
[Sun Feb 26 01:32:22 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Feb 26 01:32:22 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 01:32:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 01:32:22 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 01:32:22 2012] Source does appear to be extended
[Sun Feb 26 01:32:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 01:32:59 2012] Counts = 1122.890000, rescaling region sizes by 2.000000
[Sun Feb 26 01:32:59 2012] XMMSAS src. selection expression = ellipse(38531.286000, 10952.514000, 3452.688099, 3452.688099, 0.000000, X, Y)
[Sun Feb 26 01:32:59 2012] Writing source region out to fullrun_pn_xmm0653510501_pi300-10000_pass1_cl_src20_src.reg
[Sun Feb 26 01:32:59 2012] Extracting stamp from image fullrun_pn_xmm0653510501_pi300-10000_cl_sm2.00.img.gz, (245, 0) - (595, 325)
[Sun Feb 26 01:32:59 2012] XMMSAS bgd. selection expression = annulus(38531.286000, 10952.514000, 11508.960331, 23017.920662, X, Y) && !ellipse(23595.410000, 22982.618000, 1235.888036, 1235.888036, 0.000000, X, Y) && !ellipse(40036.206000, 22400.240600, 553.854416, 553.854416, 0.000000, X, Y) && !ellipse(27471.168400, 18982.200600, 452.603213, 357.877610, 326.138805, X, Y) && !ellipse(20732.098358, 18915.883087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24297.102600, 24670.021000, 1602.236163, 1602.236163, 0.000000, X, Y) && !ellipse(15694.366119, 18587.209045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27628.988312, 26744.815765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16033.726000, 28910.882000, 391.789611, 391.789611, 0.000000, X, Y) && !ellipse(27318.153412, 26017.911224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31078.299080, 26247.826400, 393.324011, 393.324011, 0.000000, X, Y) && !ellipse(27496.410800, 25531.616400, 534.591215, 421.944012, 91.131820, X, Y) && !ellipse(19259.543657, 24127.130110, 429.351324, 314.941033, 29.561635, X, Y) && !ellipse(31651.123600, 23578.654800, 633.136818, 416.600812, 101.445549, X, Y) && !ellipse(38680.876180, 12539.579000, 543.867216, 543.867216, 0.000000, X, Y) && !ellipse(17990.232346, 19067.774658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37384.843018, 18603.342331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36381.467621, 15796.219681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15894.676400, 32480.825800, 555.424016, 555.424016, 0.000000, X, Y) && !ellipse(18358.305695, 27906.260986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18595.361313, 27275.479126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34054.108765, 27177.596161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22248.471200, 24100.877200, 405.137273, 405.137273, 0.000000, X, Y) && !ellipse(30152.681420, 22594.172200, 601.746417, 601.746417, 0.000000, X, Y) && !ellipse(24098.447174, 23391.808472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15967.626440, 20588.902600, 461.984013, 461.984013, 0.000000, X, Y) && !ellipse(32395.940800, 12736.169400, 1022.920029, 503.505614, 0.000000, X, Y) && !ellipse(32530.360901, 19451.086548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14780.946000, 18659.240600, 1852.792053, 1852.792053, 0.000000, X, Y) && !ellipse(28718.046814, 16884.630356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19655.699036, 16829.954010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16070.624924, 34026.045105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14916.686000, 30096.712000, 1763.672051, 1763.672051, 0.000000, X, Y) && !ellipse(30634.883600, 28864.837400, 369.004011, 369.004011, 0.000000, X, Y) && !ellipse(21202.540600, 28351.944000, 1375.008040, 1375.008040, 0.000000, X, Y) && !ellipse(29728.314200, 24718.209000, 402.771212, 402.771212, 0.000000, X, Y) && !ellipse(21534.460960, 21874.959000, 347.250410, 347.250410, 0.000000, X, Y) && !ellipse(25111.476000, 15348.567800, 1742.568050, 1742.568050, 0.000000, X, Y)
[Sun Feb 26 01:32:59 2012] Writing fullrun_pn_xmm0653510501_pi300-10000_pass1_cl_src20.gif
[Sun Feb 26 02:48:26 2012] Mean detx,y = (-16503.44, -7495.00) 
[Sun Feb 26 02:49:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 02:55:28 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 02:55:29 2012] Setting source spectrum file to fullrun_pn_xmm0653510501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Feb 26 02:55:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0653510501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Feb 26 09:22:31 2012] Updating aperture counts using extracted products
[Sun Feb 26 09:22:31 2012] Error reading totcts from fullrun_pn_xmm0653510501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Feb 26 09:22:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 09:22:34 2012] Using photon index=1.80, rate=0.0106, arf fullrun_pn_xmm0653510501_pi300-10000_pass1_cl_src20.arf
[Sun Feb 26 09:22:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 09:22:34 2012] Updating source flux to 1.5e-13
[Sun Feb 26 09:26:48 2012] Flag p found in src. 20 procflags, skipping spectral fitting
[Sun Feb 26 09:26:48 2012] Flag c found in src. 20 procflags, skipping spectral fitting