[Sat Feb 25 12:54:40 2012] Detection parameters:
  Position = (279.8, 284.1) = 7 8 41.23 -49 33 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101193.9 +/- 384.6
  Background counts = 91.8
  Rate = 0.9 +/- 0.003

[Sat Feb 25 12:54:42 2012] Off-axis axis estimate = 1.70'
[Sat Feb 25 15:32:39 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:32:39 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Feb 25 15:32:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Feb 25 15:32:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Feb 25 16:51:23 2012] fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Feb 25 16:51:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_src1.csv
[Sat Feb 25 16:51:23 2012] fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Feb 25 16:51:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_src1.csv
[Sat Feb 25 16:51:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:51:24 2012] fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 25 16:51:24 2012] fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 25 16:51:24 2012] Fit fullrun_mos1_xmm0653510501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Feb 25 19:13:28 2012] Spatial fit model total counts = 88314.800000, observed total counts = 88324.000000
[Sat Feb 25 19:13:28 2012] Offset between fit and detection position for source 3 = 0.096670 pixels
[Sat Feb 25 19:13:28 2012] 88303.600000 total counts/ 18788.200000 bgd. counts: snr = 507.152346
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.096670 pixels
  Position = (279.9, 284.2) = 7 8 41.22 -49 33 7.9
  Extent = 5.4 (5.4-5.4)", rotation angle = 0
  Source counts = 69515.4 +/- 297.2
  Background counts = 18788.2
  Rate = 0.6 +/- 0.003
[Sat Feb 25 19:13:28 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 19:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 19:13:28 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 19:13:28 2012] Source does appear to be extended
[Sat Feb 25 19:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 22:29:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 22:29:45 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Sat Feb 25 22:29:45 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.317
[Sat Feb 25 22:29:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Sat Feb 25 23:27:55 2012] fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Feb 25 23:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_src1.csv
[Sat Feb 25 23:27:55 2012] fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Feb 25 23:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_src1.csv
[Sat Feb 25 23:27:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 23:27:55 2012] fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 25 23:27:55 2012] fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 25 23:27:55 2012] Fit fullrun_mos1_xmm0653510501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 26 01:32:28 2012] Spatial fit model total counts = 88175.900000, observed total counts = 88176.000000
[Sun Feb 26 01:32:28 2012] Offset between fit and detection position for source 3 = 0.012485 pixels
[Sun Feb 26 01:32:28 2012] 88501.200000 total counts/ 19460.500000 bgd. counts: snr = 494.912233
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012485 pixels
  Position = (279.8, 284.2) = 7 8 41.22 -49 33 7.9
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 69040.7 +/- 297.5
  Background counts = 19460.5
  Rate = 0.6 +/- 0.003
[Sun Feb 26 01:32:28 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 01:32:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 01:32:28 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 01:32:28 2012] Source does appear to be extended
[Sun Feb 26 01:32:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 07:08:14 2012] Counts = 69040.700000, rescaling region sizes by 3.000000
[Sun Feb 26 07:08:14 2012] XMMSAS src. selection expression = ellipse(24297.401600, 24676.286200, 964.315828, 964.315828, 0.000000, X, Y)
[Sun Feb 26 07:08:14 2012] Writing source region out to fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3_src.reg
[Sun Feb 26 07:08:14 2012] Extracting stamp from image fullrun_mos1_xmm0653510501_pi300-10000_cl_sm2.00.img.gz, (224, 229) - (335, 340)
[Sun Feb 26 07:08:14 2012] XMMSAS bgd. selection expression = annulus(24297.401600, 24676.286200, 4821.579139, 9643.158277, X, Y) && !ellipse(20723.327469, 18879.360504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16022.757401, 28923.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15673.253326, 18577.129227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19623.906387, 16737.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16064.925903, 34037.690063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17987.137909, 19060.367126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16439.492000, 24024.378000, 1684.392048, 1684.392048, 0.000000, X, Y) && !ellipse(15261.598011, 28296.466043, 1782.247914, 1261.824064, 210.313908, X, Y)
[Sun Feb 26 07:08:14 2012] Writing fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3.gif
[Sun Feb 26 07:08:41 2012] Mean detx,y = (281.17, -225.77) 
[Sun Feb 26 07:08:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 07:12:10 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 07:12:10 2012] Setting source spectrum file to fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Feb 26 07:12:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Feb 26 09:22:36 2012] Updating aperture counts using extracted products
[Sun Feb 26 09:22:36 2012] Error reading totcts from fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Feb 26 09:22:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 09:22:37 2012] Using photon index=1.80, rate=0.586, arf fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3.arf
[Sun Feb 26 09:22:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 09:22:38 2012] Updating source flux to 5.5e-12
[Sun Feb 26 09:24:54 2012] Reading fit data from xmm0653510501/analysis//spectral/fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3_pl.csv
[Sun Feb 26 09:24:54 2012] Spectral fit parameter nH value = 1.57833e+21
[Sun Feb 26 09:24:54 2012] Spectral fit parameter PhoIndex value = 4.71354
[Sun Feb 26 09:24:54 2012] Failed to get F(0.3-8.0) from xmm0653510501/analysis//spectral/fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Feb 26 09:24:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 09:24:54 2012] Using Nh = 1.6e+21, photon index=4.71, rate=0.586, arf fullrun_mos1_xmm0653510501_pi300-10000_pass1_cl_src3.arf
[Sun Feb 26 09:24:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 09:24:54 2012] Updating source flux to 3.7e-12