[Sat Mar 10 04:41:33 2012] Detection parameters:
  Position = (325.2, 513.0) = 14 9 53.15 41 59 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.3 +/- 6.8
  Background counts = 4.5
  Rate = 0.002 +/- 0.0004

[Sat Mar 10 04:41:33 2012] Off-axis axis estimate = 15.68'
[Sat Mar 10 05:48:35 2012] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 05:48:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 05:48:35 2012] Initial guess for spatial extent in simple fitting = 14.27"
[Sat Mar 10 05:48:35 2012] source mask rpix=3.3, npix_max = 57, mask sum = 57, frac = 0.997
[Sat Mar 10 05:48:35 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 14.27"
[Sat Mar 10 06:38:02 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src23.ximg exists
[Sat Mar 10 06:38:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src23.csv
[Sat Mar 10 06:38:02 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Mar 10 06:38:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src23.csv
[Sat Mar 10 06:38:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 06:38:03 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Mar 10 06:38:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Mar 10 06:38:03 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Mar 10 06:38:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Mar 10 06:38:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 07:04:50 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 19.210056 pixels away
[Sat Mar 10 07:04:50 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 07:04:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 07:04:50 2012] Assessing source extent using major
[Sat Mar 10 07:04:50 2012] Source does appear to be extended
[Sat Mar 10 07:04:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 08:04:39 2012] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 08:04:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 08:04:39 2012] Initial guess for spatial extent in simple fitting = 14.27"
[Sat Mar 10 08:04:39 2012] source mask rpix=3.3, npix_max = 57, mask sum = 57, frac = 0.997
[Sat Mar 10 08:04:39 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 14.27"
[Sat Mar 10 08:43:20 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src21.ximg exists
[Sat Mar 10 08:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src21.csv
[Sat Mar 10 08:43:20 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Mar 10 08:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src21.csv
[Sat Mar 10 08:43:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 08:43:20 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Mar 10 08:43:20 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Mar 10 08:43:20 2012] Fit fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Mar 10 09:14:36 2012] Spatial fit model total counts = 94.736700, observed total counts = 87.000000
[Sat Mar 10 09:14:36 2012] Offset between fit and detection position for source 23 = 0.283965 pixels
[Sat Mar 10 09:14:36 2012] 88.438700 total counts/ 65.317900 bgd. counts: snr = 2.860795
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.283965 pixels
  Position = (325.0, 513.2) = 14 9 53.22 41 59 12.8
  Extent = 7.1 (4.6-10.3)", rotation angle = 0
  Source counts = 23.1 +/- 9.4
  Background counts = 65.3
  Rate = 0.001 +/- 0.0006
[Sat Mar 10 09:14:36 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 09:14:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 09:14:36 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 09:14:36 2012] Source does appear to be extended
[Sat Mar 10 09:14:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 09:14:39 2012] Warning, spatial fit 15 centroid is now closest to src. 3
[Sat Mar 10 09:51:14 2012] XMMSAS src. selection expression = ellipse(28226.408485, 44602.254800, 424.042812, 424.042812, 0.000000, X, Y)
[Sat Mar 10 09:51:14 2012] Writing source region out to fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src23_src.reg
[Sat Mar 10 09:51:14 2012] Extracting stamp from image fullrun_mos1_xmm0653450801_pi300-10000_cl_sm2.00.img.gz, (301, 489) - (349, 538)
[Sat Mar 10 09:51:14 2012] XMMSAS bgd. selection expression = annulus(28226.408485, 44602.254800, 706.738020, 1413.476041, X, Y)
[Sat Mar 10 09:51:14 2012] Writing fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src23.gif
[Sat Mar 10 09:55:58 2012] Mean detx,y = (12046.27, 11740.07) 
[Sat Mar 10 09:55:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 09:56:11 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 09:56:11 2012] Setting source spectrum file to fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Mar 10 09:56:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Mar 10 09:56:14 2012] Warning, no src. light curve found
[Sat Mar 10 10:02:27 2012] Not generating rmf since there are only 23 counts
[Sat Mar 10 10:02:27 2012] rmf not generated due to insufficient counts
[Sat Mar 10 10:14:14 2012] Updating aperture counts using extracted products
[Sat Mar 10 10:14:14 2012] Error reading totcts from fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Mar 10 10:14:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 10:14:15 2012] Using photon index=1.80, rate=0.00148, arf fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src23.arf
[Sat Mar 10 10:14:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 10:14:15 2012] Updating source flux to 5.3e-14
[Sat Mar 10 10:14:18 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting