[Sat Mar 10 04:41:32 2012] Detection parameters:
  Position = (290.0, 318.9) = 14 10 6.85 41 45 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.8 +/- 9.7
  Background counts = 8.0
  Rate = 0.003 +/- 0.0006

[Sat Mar 10 04:41:33 2012] Off-axis axis estimate = 1.61'
[Sat Mar 10 05:48:35 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 05:48:35 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Mar 10 05:48:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Sat Mar 10 05:48:35 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.23"
[Sat Mar 10 06:38:02 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src12.ximg exists
[Sat Mar 10 06:38:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src12.csv
[Sat Mar 10 06:38:02 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Mar 10 06:38:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src12.csv
[Sat Mar 10 06:38:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 06:38:02 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Mar 10 06:38:02 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Mar 10 06:38:02 2012] Fit fullrun_mos1_xmm0653450801_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Mar 10 07:04:50 2012] Source 18 is offset by 6.663969 and 6.578153 pixels which is larger than
2 X fitted extent = 6.649839 x 6.649839, not incorporating fit results
[Sat Mar 10 07:04:50 2012] Source 18 is offset by 4.133049 and -3.952766 pixels which is larger than
2 X fitted extent = 1.639867 x 1.639867, not incorporating fit results
[Sat Mar 10 07:04:50 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 07:04:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 07:04:50 2012] Assessing source extent using major
[Sat Mar 10 07:04:50 2012] Source does appear to be extended
[Sat Mar 10 07:04:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 08:04:39 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 08:04:39 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Mar 10 08:04:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Sat Mar 10 08:04:39 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.23"
[Sat Mar 10 08:43:19 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src12.ximg exists
[Sat Mar 10 08:43:19 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Mar 10 08:43:20 2012] Fit fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Mar 10 08:43:20 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Mar 10 08:43:20 2012] fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Mar 10 08:43:20 2012] Fit fullrun_mos1_xmm0653450801_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Mar 10 09:14:36 2012] Warning, spatial fit 12 centroid is now closest to src. 4
[Sat Mar 10 09:14:36 2012] Spatial fit model total counts = 238.208000, observed total counts = 237.000000
[Sat Mar 10 09:14:36 2012] Offset between fit and detection position for source 18 = 6.336556 pixels
[Sat Mar 10 09:14:36 2012] Warning, changing simple spatial fit ID from 12 to 15
[Sat Mar 10 09:14:36 2012] 238.177600 total counts/ 196.315000 bgd. counts: snr = 2.987786
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 6.336556 pixels
  Position = (296.3, 318.4) = 14 10 4.40 41 45 5.2
  Extent = 13.8 (13.8-27.7)", rotation angle = 0
  Source counts = 41.9 +/- 15.4
  Background counts = 196.3
  Rate = 0.003 +/- 0.001
[Sat Mar 10 09:14:36 2012] Spatial fit model total counts = 302.728000, observed total counts = 302.000000
[Sat Mar 10 09:14:36 2012] Offset between fit and detection position for source 18 = 3.932526 pixels
[Sat Mar 10 09:14:36 2012] Warning, changing simple spatial fit ID from 15 to 16
[Sat Mar 10 09:14:36 2012] 289.578000 total counts/ 228.067000 bgd. counts: snr = 4.073067
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.932526 pixels
  Position = (298.4, 321.7) = 14 10 3.60 41 45 19.8
  Extent = 7.4 (5.2-10.1)", rotation angle = 0
  Source counts = 61.5 +/- 17.0
  Background counts = 228.1
  Rate = 0.004 +/- 0.001
[Sat Mar 10 09:14:36 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 09:14:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 09:14:36 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 09:14:36 2012] Source does appear to be extended
[Sat Mar 10 09:14:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 09:14:36 2012] Source is confused with source 4
[Sat Mar 10 09:51:14 2012] XMMSAS src. selection expression = ellipse(25911.498000, 27940.588000, 444.763213, 444.763213, 0.000000, X, Y)
[Sat Mar 10 09:51:14 2012] Writing source region out to fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src18_src.reg
[Sat Mar 10 09:51:14 2012] Extracting stamp from image fullrun_mos1_xmm0653450801_pi300-10000_cl_sm2.00.img.gz, (273, 296) - (324, 347)
[Sat Mar 10 09:51:14 2012] XMMSAS bgd. selection expression = annulus(25911.498000, 27940.588000, 741.272021, 1482.544043, X, Y) && !ellipse(25705.272000, 27904.734000, 489.689614, 489.689614, 0.000000, X, Y) && !ellipse(25474.726746, 27019.945831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26556.568878, 27620.457703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25600.673800, 28226.452000, 1218.096035, 1218.096035, 0.000000, X, Y) && !ellipse(25974.506805, 29134.642151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26565.845551, 28350.051788, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 10 09:51:14 2012] Writing fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src18.gif
[Sat Mar 10 09:54:09 2012] Mean detx,y = (252.93, -216.41) 
[Sat Mar 10 09:54:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 09:54:17 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 09:54:17 2012] Setting source spectrum file to fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Mar 10 09:54:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Mar 10 10:01:19 2012] Not generating rmf since there are only 61 counts
[Sat Mar 10 10:01:19 2012] rmf not generated due to insufficient counts
[Sat Mar 10 10:14:13 2012] Updating aperture counts using extracted products
[Sat Mar 10 10:14:13 2012] Error reading totcts from fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Mar 10 10:14:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 10:14:14 2012] Using photon index=1.80, rate=0.00394, arf fullrun_mos1_xmm0653450801_pi300-10000_pass1_cl_src18.arf
[Sat Mar 10 10:14:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 10:14:14 2012] Updating source flux to 4.3e-14
[Sat Mar 10 10:14:18 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Sat Mar 10 10:14:18 2012] Flag c found in src. 18 procflags, skipping spectral fitting
[Sat Mar 10 10:14:18 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting