[Tue Feb 21 11:14:30 2012] Detection parameters:
  Position = (265.2, 128.8) = 11 36 34.88 6 59 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 16.9
  Background counts = 73.7
  Rate = 0.002 +/- 0.0003

[Tue Feb 21 11:14:31 2012] Off-axis axis estimate = 12.53'
[Tue Feb 21 11:19:34 2012] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 11:19:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 11:19:34 2012] Initial guess for spatial extent in simple fitting = 12.69"
[Tue Feb 21 11:19:34 2012] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.006
[Tue Feb 21 11:19:34 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.69"
[Tue Feb 21 13:11:39 2012] fullrun_pn_xmm0653450701_pi300-10000_cl_pass0_src15.ximg exists
[Tue Feb 21 13:11:39 2012] fullrun_pn_xmm0653450701_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Feb 21 13:11:39 2012] Fit fullrun_pn_xmm0653450701_pi300-10000_cl_pass0_src15 appears to have run properly
[Tue Feb 21 13:11:40 2012] fullrun_pn_xmm0653450701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Feb 21 13:11:40 2012] fullrun_pn_xmm0653450701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Feb 21 13:11:40 2012] Fit fullrun_pn_xmm0653450701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Feb 21 13:34:04 2012] Spatial fit model total counts = 705.203000, observed total counts = 712.000000
[Tue Feb 21 13:34:04 2012] Offset between fit and detection position for source 17 = 8.058303 pixels
[Tue Feb 21 13:34:04 2012] 774.845000 total counts/ 222.743000 bgd. counts: snr = 36.992807
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 8.058303 pixels
  Position = (257.8, 125.6) = 11 36 37.05 6 59 22.7
  Extent = 25.4 (23.0-50.8)", rotation angle = 0
  Source counts = 552.1 +/- 27.8
  Background counts = 222.7
  Rate = 0.01 +/- 0.0007
[Tue Feb 21 13:34:04 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 13:34:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 13:34:04 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 13:34:04 2012] Source does appear to be extended
[Tue Feb 21 13:34:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 13:34:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 13:34:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 13:34:18 2012] Initial guess for spatial extent in simple fitting = 25.39"
[Tue Feb 21 13:34:18 2012] source mask rpix=5.8, npix_max = 160, mask sum = 133, frac = 0.828
[Tue Feb 21 13:34:18 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 25.39"
[Tue Feb 21 15:39:26 2012] fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_src15.ximg exists
[Tue Feb 21 15:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_src15.csv
[Tue Feb 21 15:39:26 2012] fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Feb 21 15:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_src15.csv
[Tue Feb 21 15:39:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 15:39:26 2012] fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Feb 21 15:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Feb 21 15:39:26 2012] fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Feb 21 15:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Feb 21 15:39:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653450701_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 15:58:16 2012] Warning, spatial fit 15 centroid is now closest to src. 12
[Tue Feb 21 15:58:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 15:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 15:58:16 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 15:58:16 2012] Source does appear to be extended
[Tue Feb 21 15:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 15:58:33 2012] XMMSAS src. selection expression = ellipse(22379.064000, 10879.850000, 1523.382044, 1523.382044, 0.000000, X, Y)
[Tue Feb 21 15:58:33 2012] Writing source region out to fullrun_pn_xmm0653450701_pi300-10000_pass1_cl_src17_src.reg
[Tue Feb 21 15:58:33 2012] Extracting stamp from image fullrun_pn_xmm0653450701_pi300-10000_cl_sm2.00.img.gz, (170, 38) - (345, 213)
[Tue Feb 21 15:58:33 2012] XMMSAS bgd. selection expression = annulus(22379.064000, 10879.850000, 2538.970073, 5077.940146, X, Y) && !ellipse(27886.401367, 16230.120499, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 15:58:33 2012] Writing fullrun_pn_xmm0653450701_pi300-10000_pass1_cl_src17.gif
[Tue Feb 21 16:25:33 2012] Mean detx,y = (-10013.74, 13597.66) 
[Tue Feb 21 16:25:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:27:31 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:27:31 2012] Setting source spectrum file to fullrun_pn_xmm0653450701_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Feb 21 16:27:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0653450701_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Feb 22 20:37:07 2012] Updating aperture counts using extracted products
[Wed Feb 22 20:37:08 2012] Error reading totcts from fullrun_pn_xmm0653450701_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Feb 22 20:37:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 20:37:10 2012] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0653450701_pi300-10000_pass1_cl_src17.arf
[Wed Feb 22 20:37:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 20:37:10 2012] Updating source flux to 1.2e-13