[Sun Dec 18 09:57:44 2011] Detection parameters:
  Position = (300.4, 386.2) = 13 31 31.28 11 12 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.5 +/- 11.0
  Background counts = 14.9
  Rate = 0.003 +/- 0.0004

[Sun Dec 18 09:57:44 2011] Off-axis axis estimate = 6.37'
[Sun Dec 18 09:58:37 2011] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 09:58:37 2011] Initial guess for spatial extent in simple fitting = 9.61"
[Sun Dec 18 09:58:37 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.851
[Sun Dec 18 09:58:37 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 9.61"
[Sun Dec 18 09:58:37 2011] fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_src29.ximg exists
[Sun Dec 18 09:58:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_src29.csv
[Sun Dec 18 09:58:38 2011] fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Dec 18 09:58:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_src29.csv
[Sun Dec 18 09:58:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 09:58:38 2011] fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Dec 18 09:58:38 2011] fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Dec 18 09:58:38 2011] Fit fullrun_mos2_xmm0653450401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Dec 18 09:59:17 2011] Spatial fit model total counts = 201.000000, observed total counts = 201.000000
[Sun Dec 18 09:59:17 2011] Offset between fit and detection position for source 30 = 0.231806 pixels
[Sun Dec 18 09:59:17 2011] 202.725000 total counts/ 164.935000 bgd. counts: snr = 2.942527
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.231806 pixels
  Position = (300.2, 386.3) = 13 31 31.35 11 12 45.3
  Extent = 4.0 (2.8-5.4)", rotation angle = 0
  Source counts = 37.8 +/- 14.2
  Background counts = 164.9
  Rate = 0.001 +/- 0.0004
[Sun Dec 18 09:59:17 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:59:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:59:17 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:59:17 2011] Source does appear to be extended
[Sun Dec 18 09:59:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 09:59:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 09:59:49 2011] Initial guess for spatial extent in simple fitting = 4.02"
[Sun Dec 18 09:59:49 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.111
[Sun Dec 18 09:59:49 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 4.02"
[Sun Dec 18 09:59:51 2011] fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_src28.ximg exists
[Sun Dec 18 09:59:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_src28.csv
[Sun Dec 18 09:59:51 2011] fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Dec 18 09:59:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_src28.csv
[Sun Dec 18 09:59:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 09:59:52 2011] fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Dec 18 09:59:52 2011] fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Dec 18 09:59:52 2011] Fit fullrun_mos2_xmm0653450401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Dec 18 10:00:32 2011] Spatial fit model total counts = 201.000000, observed total counts = 201.000000
[Sun Dec 18 10:00:32 2011] Offset between fit and detection position for source 30 = 0.003739 pixels
[Sun Dec 18 10:00:32 2011] 202.731100 total counts/ 165.129000 bgd. counts: snr = 2.926176
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.003739 pixels
  Position = (300.2, 386.3) = 13 31 31.35 11 12 45.3
  Extent = 4.0 (2.8-5.4)", rotation angle = 0
  Source counts = 37.6 +/- 14.2
  Background counts = 165.1
  Rate = 0.001 +/- 0.0004
[Sun Dec 18 10:00:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 10:00:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 10:00:32 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 10:00:32 2011] Source does appear to be extended
[Sun Dec 18 10:00:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 10:01:48 2011] XMMSAS src. selection expression = ellipse(26067.422240, 33556.081800, 238.740007, 238.740007, 0.000000, X, Y)
[Sun Dec 18 10:01:48 2011] Not overwriting source region fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_src.reg
[Sun Dec 18 10:01:48 2011] Extracting stamp from image fullrun_mos2_xmm0653450401_pi300-10000_cl_sm2.00.img.gz, (286, 373) - (314, 400)
[Sun Dec 18 10:01:48 2011] XMMSAS bgd. selection expression = annulus(26067.422240, 33556.081800, 397.900011, 795.800023, X, Y)
[Sun Dec 18 10:01:48 2011] Writing fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30.gif
[Sun Dec 18 10:01:49 2011] ../../xmm0653450401/products/events/fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0653450401/products/events/fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sun Dec 18 10:01:49 2011] Mean detx,y = (-1702.75, 5442.18) 
[Sun Dec 18 10:01:49 2011] ../../xmm0653450401/products/images/fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_src.img and ../../xmm0653450401/products/images/fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Sun Dec 18 10:01:49 2011] ../../xmm0653450401/products/spectra/fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0653450401/products/spectra/fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sun Dec 18 10:01:49 2011] Setting source spectrum file to fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Dec 18 10:01:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Dec 18 10:01:49 2011] ../../xmm0653450401/products/lightcurves/fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0653450401/products/lightcurves/fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sun Dec 18 10:02:04 2011] Not generating rmf since there are only 37 counts
[Sun Dec 18 10:02:04 2011] rmf not generated due to insufficient counts
[Sun Dec 18 10:02:04 2011] fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30.arf exists, delete to re-create
[Sun Dec 18 10:03:26 2011] Updating aperture counts using extracted products
[Sun Dec 18 10:03:26 2011] Error reading totcts from fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Dec 18 10:03:28 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 10:03:28 2011] Using photon index=1.80, rate=0.00115, arf fullrun_mos2_xmm0653450401_pi300-10000_pass1_cl_src30.arf
[Sun Dec 18 10:03:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 10:03:28 2011] Updating source flux to 2.5e-14
[Sun Dec 18 10:03:35 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting