[Sun Dec 18 09:57:39 2011] Detection parameters:
  Position = (301.0, 386.4) = 13 31 31.12 11 12 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.7 +/- 11.6
  Background counts = 15.0
  Rate = 0.003 +/- 0.0004

[Sun Dec 18 09:57:41 2011] Off-axis axis estimate = 6.38'
[Sun Dec 18 09:58:33 2011] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 09:58:33 2011] Initial guess for spatial extent in simple fitting = 9.62"
[Sun Dec 18 09:58:33 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.020
[Sun Dec 18 09:58:33 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 9.62"
[Sun Dec 18 09:58:36 2011] fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_src20.ximg exists
[Sun Dec 18 09:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_src20.csv
[Sun Dec 18 09:58:36 2011] fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Dec 18 09:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_src20.csv
[Sun Dec 18 09:58:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 09:58:36 2011] fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Dec 18 09:58:36 2011] fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Dec 18 09:58:36 2011] Fit fullrun_mos1_xmm0653450401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Dec 18 09:59:06 2011] Spatial fit model total counts = 213.950000, observed total counts = 214.000000
[Sun Dec 18 09:59:06 2011] Offset between fit and detection position for source 10 = 0.160399 pixels
[Sun Dec 18 09:59:06 2011] 212.425300 total counts/ 160.019000 bgd. counts: snr = 4.142836
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.160399 pixels
  Position = (300.9, 386.5) = 13 31 31.15 11 12 46.5
  Extent = 5.8 (4.3-7.6)", rotation angle = 0
  Source counts = 52.4 +/- 14.6
  Background counts = 160.0
  Rate = 0.002 +/- 0.0004
[Sun Dec 18 09:59:06 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:59:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:59:06 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:59:06 2011] Source does appear to be extended
[Sun Dec 18 09:59:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 09:59:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 09:59:48 2011] Initial guess for spatial extent in simple fitting = 5.81"
[Sun Dec 18 09:59:48 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.891
[Sun Dec 18 09:59:48 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 5.81"
[Sun Dec 18 09:59:48 2011] fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_src20.ximg exists
[Sun Dec 18 09:59:48 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_src20.csv
[Sun Dec 18 09:59:48 2011] fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Dec 18 09:59:48 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_src20.csv
[Sun Dec 18 09:59:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 09:59:49 2011] fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Dec 18 09:59:49 2011] fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Dec 18 09:59:49 2011] Fit fullrun_mos1_xmm0653450401_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Dec 18 10:00:20 2011] Spatial fit model total counts = 214.860000, observed total counts = 215.000000
[Sun Dec 18 10:00:20 2011] Offset between fit and detection position for source 10 = 0.035304 pixels
[Sun Dec 18 10:00:20 2011] 214.548600 total counts/ 163.543000 bgd. counts: snr = 3.988429
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.035304 pixels
  Position = (300.8, 386.5) = 13 31 31.16 11 12 46.5
  Extent = 5.7 (4.1-7.5)", rotation angle = 0
  Source counts = 51.0 +/- 14.6
  Background counts = 163.5
  Rate = 0.002 +/- 0.0004
[Sun Dec 18 10:00:20 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 10:00:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 10:00:20 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 10:00:20 2011] Source does appear to be extended
[Sun Dec 18 10:00:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 10:01:33 2011] XMMSAS src. selection expression = ellipse(26125.042400, 33579.087400, 343.514410, 343.514410, 0.000000, X, Y)
[Sun Dec 18 10:01:33 2011] Not overwriting source region fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_src.reg
[Sun Dec 18 10:01:33 2011] Extracting stamp from image fullrun_mos1_xmm0653450401_pi300-10000_cl_sm2.00.img.gz, (281, 367) - (321, 406)
[Sun Dec 18 10:01:33 2011] XMMSAS bgd. selection expression = annulus(26125.042400, 33579.087400, 572.524016, 1145.048033, X, Y) && !ellipse(24230.123352, 35265.080902, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 10:01:33 2011] Writing fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10.gif
[Sun Dec 18 10:01:34 2011] ../../xmm0653450401/products/events/fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0653450401/products/events/fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Dec 18 10:01:34 2011] Mean detx,y = (5662.45, 1623.22) 
[Sun Dec 18 10:01:34 2011] ../../xmm0653450401/products/images/fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_src.img and ../../xmm0653450401/products/images/fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Dec 18 10:01:34 2011] ../../xmm0653450401/products/spectra/fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0653450401/products/spectra/fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Dec 18 10:01:34 2011] Setting source spectrum file to fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Dec 18 10:01:34 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Dec 18 10:01:34 2011] ../../xmm0653450401/products/lightcurves/fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0653450401/products/lightcurves/fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Dec 18 10:01:47 2011] Not generating rmf since there are only 51 counts
[Sun Dec 18 10:01:47 2011] rmf not generated due to insufficient counts
[Sun Dec 18 10:01:47 2011] fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Sun Dec 18 10:03:19 2011] Updating aperture counts using extracted products
[Sun Dec 18 10:03:19 2011] Error reading totcts from fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Dec 18 10:03:21 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 10:03:21 2011] Using photon index=1.80, rate=0.00157, arf fullrun_mos1_xmm0653450401_pi300-10000_pass1_cl_src10.arf
[Sun Dec 18 10:03:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 10:03:21 2011] Updating source flux to 2.5e-14
[Sun Dec 18 10:03:34 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting