[Thu Aug  2 17:14:35 2012] Detection parameters:
  Position = (365.6, 366.9) = 10 7 15.09 38 7 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1012.3 +/- 40.0
  Background counts = 56.3
  Rate = 0.04 +/- 0.002

[Thu Aug  2 17:14:35 2012] Off-axis axis estimate = 6.96'
[Thu Aug  2 18:46:13 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 18:46:13 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Thu Aug  2 18:46:13 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.972
[Thu Aug  2 18:46:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.91"
[Thu Aug  2 19:14:27 2012] fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 19:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 19:14:27 2012] fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 19:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 19:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 19:14:28 2012] fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 19:14:28 2012] fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 19:14:28 2012] Fit fullrun_mos2_xmm0653450201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  2 19:14:41 2012] Spatial fit model total counts = 1120.050000, observed total counts = 1120.000000
[Thu Aug  2 19:14:41 2012] Offset between fit and detection position for source 5 = 0.177408 pixels
[Thu Aug  2 19:14:41 2012] 1119.927000 total counts/ 393.169000 bgd. counts: snr = 36.652212
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.177408 pixels
  Position = (365.4, 366.9) = 10 7 15.15 38 7 21.5
  Extent = 6.6 (6.2-7.1)", rotation angle = 0
  Source counts = 726.8 +/- 33.5
  Background counts = 393.2
  Rate = 0.02 +/- 0.0009
[Thu Aug  2 19:14:41 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 19:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 19:14:41 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 19:14:41 2012] Source does appear to be extended
[Thu Aug  2 19:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 20:38:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 20:38:45 2012] Initial guess for spatial extent in simple fitting = 6.62"
[Thu Aug  2 20:38:45 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Thu Aug  2 20:38:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.62"
[Thu Aug  2 21:01:45 2012] fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  2 21:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 21:01:45 2012] fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  2 21:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 21:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 21:01:45 2012] fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  2 21:01:45 2012] fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  2 21:01:45 2012] Fit fullrun_mos2_xmm0653450201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  2 21:02:00 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Thu Aug  2 21:02:00 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 21:02:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 21:02:00 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 21:02:00 2012] Source does appear to be extended
[Thu Aug  2 21:02:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 22:31:05 2012] XMMSAS src. selection expression = ellipse(31745.050680, 31868.717200, 396.941475, 396.941475, 0.000000, X, Y)
[Thu Aug  2 22:31:05 2012] Writing source region out to fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5_src.reg
[Thu Aug  2 22:31:05 2012] Extracting stamp from image fullrun_mos2_xmm0653450201_pi300-10000_cl_sm2.00.img.gz, (343, 344) - (388, 390)
[Thu Aug  2 22:31:05 2012] XMMSAS bgd. selection expression = annulus(31745.050680, 31868.717200, 661.569125, 1323.138251, X, Y)
[Thu Aug  2 22:31:05 2012] Writing fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5.gif
[Thu Aug  2 22:31:09 2012] Mean detx,y = (8402.70, -5796.54) 
[Thu Aug  2 22:31:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 22:31:23 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 22:31:23 2012] Setting source spectrum file to fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug  2 22:31:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Aug  2 23:11:06 2012] Updating aperture counts using extracted products
[Thu Aug  2 23:11:06 2012] Error reading totcts from fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug  2 23:11:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 23:11:06 2012] Using photon index=1.80, rate=0.0195, arf fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5.arf
[Thu Aug  2 23:11:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 23:11:06 2012] Updating source flux to 3.8e-13
[Thu Aug  2 23:12:03 2012] Reading fit data from xmm0653450201/analysis//spectral/fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5_pl.csv
[Thu Aug  2 23:12:03 2012] Spectral fit parameter nH value = 1.35764e+21
[Thu Aug  2 23:12:03 2012] Spectral fit parameter PhoIndex value = 2.62978
[Thu Aug  2 23:12:03 2012] Failed to get F(0.3-8.0) from xmm0653450201/analysis//spectral/fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 23:12:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 23:12:03 2012] Using Nh = 1.4e+21, photon index=2.63, rate=0.0195, arf fullrun_mos2_xmm0653450201_pi300-10000_pass1_cl_src5.arf
[Thu Aug  2 23:12:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 23:12:03 2012] Updating source flux to 3.1e-13