[Tue Apr 10 15:04:51 2012] Detection parameters:
  Position = (238.9, 163.0) = 14 3 40.26 -41 31 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2737.0 +/- 64.5
  Background counts = 98.0
  Rate = 0.04 +/- 0.001

[Tue Apr 10 15:04:53 2012] Off-axis axis estimate = 10.73'
[Tue Apr 10 18:32:28 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:32:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 18:32:28 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Tue Apr 10 18:32:28 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.873
[Tue Apr 10 18:32:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.79"
[Tue Apr 10 19:49:11 2012] fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_src3.ximg exists
[Tue Apr 10 19:49:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_src3.csv
[Tue Apr 10 19:49:11 2012] fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Apr 10 19:49:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_src3.csv
[Tue Apr 10 19:49:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 19:49:12 2012] fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Apr 10 19:49:12 2012] fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Apr 10 19:49:12 2012] Fit fullrun_mos2_xmm0653380501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Apr 10 19:49:37 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.398579 pixels away
[Tue Apr 10 19:49:37 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.040424 pixels away
[Tue Apr 10 19:49:37 2012] Source 3 is offset by 3.116989 and -1.188970 pixels which is larger than
2 X fitted extent = 2.565756 x 2.565756, not incorporating fit results
[Tue Apr 10 19:49:37 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 19:49:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 19:49:37 2012] Assessing source extent using major
[Tue Apr 10 19:49:37 2012] Source does appear to be extended
[Tue Apr 10 19:49:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:58:31 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:58:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 22:58:31 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Tue Apr 10 22:58:31 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.873
[Tue Apr 10 22:58:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.79"
[Wed Apr 11 00:11:07 2012] fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_src3.ximg exists
[Wed Apr 11 00:11:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 00:11:07 2012] fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Apr 11 00:11:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 00:11:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:11:08 2012] fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Apr 11 00:11:08 2012] fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Apr 11 00:11:08 2012] Fit fullrun_mos2_xmm0653380501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Apr 11 00:11:32 2012] Spatial fit model total counts = 3350.170000, observed total counts = 3339.000000
[Wed Apr 11 00:11:32 2012] Offset between fit and detection position for source 3 = 0.129893 pixels
[Wed Apr 11 00:11:32 2012] 3385.180000 total counts/ 1529.760000 bgd. counts: snr = 47.438460
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.129893 pixels
  Position = (239.1, 163.0) = 14 3 40.21 -41 31 8.7
  Extent = 5.9 (5.7-6.2)", rotation angle = 0
  Source counts = 1855.4 +/- 58.2
  Background counts = 1529.8
  Rate = 0.02 +/- 0.0005
[Wed Apr 11 00:11:33 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:11:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:11:33 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:11:33 2012] Source does appear to be extended
[Wed Apr 11 00:11:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 05:57:55 2012] Counts = 1855.420000, rescaling region sizes by 2.000000
[Wed Apr 11 05:57:55 2012] XMMSAS src. selection expression = ellipse(20750.588600, 14132.372600, 707.977220, 707.977220, 0.000000, X, Y)
[Wed Apr 11 05:57:55 2012] Writing source region out to fullrun_mos2_xmm0653380501_pi300-10000_pass1_cl_src3_src.reg
[Wed Apr 11 05:57:55 2012] Extracting stamp from image fullrun_mos2_xmm0653380501_pi300-10000_cl_sm2.00.img.gz, (198, 122) - (280, 204)
[Wed Apr 11 05:57:55 2012] XMMSAS bgd. selection expression = annulus(20750.588600, 14132.372600, 2359.924068, 4719.848136, X, Y) && !ellipse(22905.651367, 13456.921158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18298.513107, 12934.751236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24348.039600, 18163.855800, 384.378411, 384.378411, 0.000000, X, Y) && !ellipse(20212.726837, 12177.126678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19801.772110, 14639.980972, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 05:57:55 2012] Writing fullrun_mos2_xmm0653380501_pi300-10000_pass1_cl_src3.gif
[Wed Apr 11 06:00:40 2012] Mean detx,y = (-7682.34, 7665.47) 
[Wed Apr 11 06:00:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 06:01:05 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 06:01:05 2012] Setting source spectrum file to fullrun_mos2_xmm0653380501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 06:01:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653380501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Apr 11 07:21:43 2012] Updating aperture counts using extracted products
[Wed Apr 11 07:21:43 2012] Error reading totcts from fullrun_mos2_xmm0653380501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 07:21:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 07:21:44 2012] Using photon index=1.80, rate=0.0152, arf fullrun_mos2_xmm0653380501_pi300-10000_pass1_cl_src3.arf
[Wed Apr 11 07:21:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 07:21:44 2012] Updating source flux to 2.8e-13
[Wed Apr 11 07:23:37 2012] Flag b found in src. 3 procflags, skipping spectral fitting