[Tue Apr 10 14:24:51 2012] Detection parameters:
  Position = (357.4, 465.1) = 14 3 0.04 -41 12 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.4 +/- 18.3
  Background counts = 95.6
  Rate = 0.0008 +/- 0.0002

[Tue Apr 10 14:24:52 2012] Off-axis axis estimate = 12.81'
[Tue Apr 10 16:50:21 2012] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:50:21 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Tue Apr 10 16:50:21 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.029
[Tue Apr 10 16:50:21 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 12.84"
[Tue Apr 10 18:19:57 2012] fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_src54.ximg exists
[Tue Apr 10 18:19:57 2012] fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_src54_1.ximg exists
[Tue Apr 10 18:19:57 2012] Fit fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_src54 appears to have run properly
[Tue Apr 10 18:19:58 2012] fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Tue Apr 10 18:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_tfrozen_src54.csv
[Tue Apr 10 18:19:58 2012] fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Tue Apr 10 18:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_tfrozen_src54.csv
[Tue Apr 10 18:19:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653380201_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:20:16 2012] Warning, spatial fit 54 centroid is now closest to src. 11
[Tue Apr 10 18:20:16 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:20:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:20:16 2012] Assessing source extent using major
[Tue Apr 10 18:20:16 2012] Source does appear to be extended
[Tue Apr 10 18:20:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:02:20 2012] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:02:20 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Tue Apr 10 21:02:20 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.029
[Tue Apr 10 21:02:20 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 12.84"
[Tue Apr 10 22:47:40 2012] fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_src50.ximg exists
[Tue Apr 10 22:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_src50.csv
[Tue Apr 10 22:47:40 2012] fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_src50_1.ximg exists
[Tue Apr 10 22:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_src50.csv
[Tue Apr 10 22:47:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:47:40 2012] fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Tue Apr 10 22:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_tfrozen_src50.csv
[Tue Apr 10 22:47:40 2012] fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Tue Apr 10 22:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_tfrozen_src50.csv
[Tue Apr 10 22:47:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653380201_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:47:59 2012] Warning, spatial fit 50 centroid is now closest to src. 26
[Tue Apr 10 22:47:59 2012] Source 30 is offset by -1.799636 and -4.324902 pixels which is larger than
2 X fitted extent = 3.324432 x 3.324432, not incorporating fit results
[Tue Apr 10 22:47:59 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:47:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:47:59 2012] Assessing source extent using major
[Tue Apr 10 22:47:59 2012] Source does appear to be extended
[Tue Apr 10 22:47:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 04:06:41 2012] XMMSAS src. selection expression = ellipse(31042.827637, 40411.175507, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 04:06:41 2012] Writing source region out to fullrun_mos1_xmm0653380201_pi300-10000_pass1_cl_src30_src.reg
[Wed Apr 11 04:06:41 2012] Extracting stamp from image fullrun_mos1_xmm0653380201_pi300-10000_cl_sm2.00.img.gz, (320, 428) - (395, 503)
[Wed Apr 11 04:06:41 2012] XMMSAS bgd. selection expression = annulus(31042.827637, 40411.175507, 1087.500000, 2175.000000, X, Y) && !ellipse(30884.800293, 39094.559753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33838.002655, 42651.656494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33186.949646, 42405.535278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32207.769531, 42231.352081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30541.305878, 41790.176483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31722.119537, 42103.257538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31611.346405, 41546.253632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31265.547424, 42011.205017, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 04:06:41 2012] Writing fullrun_mos1_xmm0653380201_pi300-10000_pass1_cl_src30.gif
[Wed Apr 11 04:21:19 2012] Mean detx,y = (11456.76, 7106.20) 
[Wed Apr 11 04:21:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 04:21:25 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 04:21:26 2012] Setting source spectrum file to fullrun_mos1_xmm0653380201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Apr 11 04:21:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653380201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Apr 11 05:09:29 2012] Not generating rmf since there are only 86 counts
[Wed Apr 11 05:09:29 2012] rmf not generated due to insufficient counts
[Wed Apr 11 05:12:32 2012] Updating aperture counts using extracted products
[Wed Apr 11 05:12:32 2012] Error reading totcts from fullrun_mos1_xmm0653380201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Apr 11 05:12:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 05:12:33 2012] Using photon index=1.80, rate=0.000832, arf fullrun_mos1_xmm0653380201_pi300-10000_pass1_cl_src30.arf
[Wed Apr 11 05:12:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 05:12:33 2012] Updating source flux to 1.6e-14
[Wed Apr 11 05:12:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting