[Fri May  3 03:33:54 2013] Detection parameters:
  Position = (483.0, 193.0) = 17 33 17.21 -33 39 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 395.8 +/- 39.8
  Background counts = 375.6
  Rate = 0.003 +/- 0.0003

[Fri May  3 03:33:55 2013] Off-axis axis estimate = 15.41'
[Fri May  3 03:46:12 2013] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Fri May  3 03:46:12 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Fri May  3 03:46:12 2013] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.138
[Fri May  3 03:46:12 2013] Giving source the simple spatial ID 84 for pass 0, mean size = 14.13"
[Fri May  3 10:06:14 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src84.ximg exists
[Fri May  3 10:06:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src84.csv
[Fri May  3 10:06:14 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src84_1.ximg exists
[Fri May  3 10:06:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src84.csv
[Fri May  3 10:06:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 10:06:16 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Fri May  3 10:06:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src84.csv
[Fri May  3 10:06:16 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Fri May  3 10:06:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src84.csv
[Fri May  3 10:06:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:55:33 2013] Spatial fit model total counts = 2297.650000, observed total counts = 1832.000000
[Fri May  3 15:55:33 2013] Poor agreement between spatial fit and data for source 93
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 15:55:33 2013] Spatial fit model total counts = 2151.120000, observed total counts = 2151.000000
[Fri May  3 15:55:33 2013] Offset between fit and detection position for source 93 = 1.746169 pixels
[Fri May  3 15:55:33 2013] Warning, changing simple spatial fit ID from 84 to 77
[Fri May  3 15:55:33 2013] 2120.769000 total counts/ 1998.140000 bgd. counts: snr = 2.743344
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 1.746169 pixels
  Position = (484.3, 194.2) = 17 33 16.77 -33 39 31.8
  Extent = 27.9 (27.8-55.7)", rotation angle = 319 (313-331) degrees
  Source counts = 122.6 +/- 46.1
  Background counts = 1998.1
  Rate = 0.002 +/- 0.0008
[Fri May  3 15:55:33 2013] Vigneting correction estimate = 1.000000
[Fri May  3 15:55:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 15:55:33 2013] Assessing source extent using major axis lower bound
[Fri May  3 15:55:33 2013] Source does appear to be extended
[Fri May  3 15:55:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.18
[Fri May  3 15:55:33 2013] Source is asymmetric
[Fri May  3 15:55:33 2013] Source is confused with source 80
[Fri May  3 15:56:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 15:56:22 2013] Initial guess for spatial extent in simple fitting = 15.67"
[Fri May  3 15:56:22 2013] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.951
[Fri May  3 15:56:22 2013] Giving source the simple spatial ID 81 for pass 1, mean size = 15.67"
[Fri May  3 21:48:44 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src81.ximg exists
[Fri May  3 21:48:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src81.csv
[Fri May  3 21:48:44 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src81_1.ximg exists
[Fri May  3 21:48:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src81.csv
[Fri May  3 21:48:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:48:46 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Fri May  3 21:48:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src81.csv
[Fri May  3 21:48:46 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Fri May  3 21:48:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src81.csv
[Fri May  3 21:48:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:49:42 2013] Warning, spatial fit 81 centroid is now closest to src. 79
[Sat May  4 03:49:42 2013] Vigneting correction estimate = 1.000000
[Sat May  4 03:49:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 03:49:42 2013] Assessing source extent using major axis lower bound
[Sat May  4 03:49:42 2013] Source does appear to be extended
[Sat May  4 03:49:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.18
[Sat May  4 03:49:42 2013] Source is asymmetric
[Sat May  4 03:50:40 2013] XMMSAS src. selection expression = ellipse(42082.290000, 16845.412000, 1671.498048, 208.937406, 319.289700, X, Y)
[Sat May  4 03:50:40 2013] Writing source region out to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src93_src.reg
[Sat May  4 03:50:40 2013] Extracting stamp from image fullrun_pn_xmm0653320101_pi300-10000_cl_sm2.00.img.gz, (388, 98) - (580, 290)
[Sat May  4 03:50:40 2013] XMMSAS bgd. selection expression = annulus(42082.290000, 16845.412000, 2785.830080, 5571.660160, X, Y) && !ellipse(35980.333620, 16513.626400, 756.922422, 305.312009, 121.999200, X, Y) && !ellipse(42015.989380, 14001.421204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40625.728000, 14210.339000, 1795.344052, 1795.344052, 0.000000, X, Y) && !ellipse(38073.722229, 14362.602097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38620.716675, 14343.969101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42378.422119, 22911.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41731.206000, 20902.431600, 2395.864069, 299.483209, 345.155600, X, Y) && !ellipse(42624.806183, 20948.126144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41554.617800, 20858.662000, 2129.656061, 266.206408, 345.721100, X, Y) && !ellipse(37566.266479, 14430.764664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42076.678040, 19858.040146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42080.154600, 19233.386000, 1362.480039, 272.397608, 341.755400, X, Y) && !ellipse(40144.238861, 19336.799484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41611.843475, 19012.547394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41403.962800, 18914.241400, 2492.264072, 311.532809, 331.656000, X, Y) && !ellipse(40402.307709, 18198.780914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41698.591248, 18045.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41311.973846, 18030.122833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42430.572205, 18218.806473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42013.979523, 17507.820160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41603.650055, 17087.518402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40970.189270, 16946.327927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35860.568000, 14404.476000, 2007.032058, 328.896809, 7.269100, X, Y) && !ellipse(41991.117065, 15881.002731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41333.599060, 16048.888199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41010.272247, 15090.178360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38237.203400, 15250.984000, 2113.568061, 264.196808, 105.077700, X, Y) && !ellipse(36113.137085, 15268.597656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41665.820221, 14992.121490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38179.665863, 14895.888626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40341.274000, 14131.250000, 2238.336064, 858.920025, 4.691450, X, Y) && !ellipse(35657.773010, 14938.264221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41139.851000, 14499.982000, 738.026421, 283.364808, 300.522500, X, Y)
[Sat May  4 03:50:40 2013] Writing fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src93.gif
[Sat May  4 05:47:38 2013] Mean detx,y = (-17581.84, -5875.52) 
[Sat May  4 05:47:44 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 05:48:30 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 05:48:30 2013] Setting source spectrum file to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Sat May  4 05:48:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Sat May  4 12:51:32 2013] Updating aperture counts using extracted products
[Sat May  4 12:51:32 2013] Total counts from fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src93_src_b10.pi.gz = 553.00
[Sat May  4 12:51:32 2013] Total counts from fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src93_bgd.pi.gz = 13588.00
[Sat May  4 12:51:32 2013] Got source and background scale factors 689333.000000, 15315381.000000
[Sat May  4 12:51:32 2013] User source parameters:
  Position = (484.3, 194.2) = 17 33 16.77 -33 39 31.8
  Extent = 27.9 (27.8-55.7)", rotation angle = 319 (313-331) degrees
  Source aperture counts = -58.6 +/- 24.5
  Background aperture counts = 611.6
  Rate = -0.001 +/- 0.0004

[Sat May  4 12:51:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 12:51:40 2013] Using photon index=1.80, rate=0.00204, arf fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src93.arf
[Sat May  4 12:51:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 12:51:40 2013] Updating source flux to 5.1e-14
[Sat May  4 12:53:05 2013] Flag p found in src. 93 procflags, skipping spectral fitting
[Sat May  4 12:53:05 2013] Flag c found in src. 93 procflags, skipping spectral fitting
[Sat May  4 12:53:28 2013] xmm0653320101/analysis//spectral/fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src93_pl.csv not found, spectral fit skipped or did not complete