[Fri May  3 03:33:52 2013] Detection parameters:
  Position = (465.2, 164.1) = 17 33 23.38 -33 41 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 409.0 +/- 39.4
  Background counts = 400.7
  Rate = 0.003 +/- 0.0003

[Fri May  3 03:33:55 2013] Off-axis axis estimate = 15.53'
[Fri May  3 03:46:12 2013] Using EEF radius (= 14.19 ")to estimate initial spatial extent for simple fitting
[Fri May  3 03:46:12 2013] Initial guess for spatial extent in simple fitting = 14.19"
[Fri May  3 03:46:12 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.130
[Fri May  3 03:46:12 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 14.19"
[Fri May  3 10:06:12 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src3.ximg exists
[Fri May  3 10:06:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src3.csv
[Fri May  3 10:06:13 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May  3 10:06:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src3.csv
[Fri May  3 10:06:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 10:06:15 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May  3 10:06:15 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May  3 10:06:15 2013] Fit fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May  3 15:55:33 2013] Spatial fit model total counts = 1876.340000, observed total counts = 1858.000000
[Fri May  3 15:55:33 2013] Offset between fit and detection position for source 7 = 2.328547 pixels
[Fri May  3 15:55:33 2013] 1420.957055 total counts/ 0.667055 bgd. counts: snr = 1738.986487
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.328547 pixels
  Position = (467.5, 163.9) = 17 33 22.58 -33 41 43.8
  Extent = 22.4 (20.0-23.6)", rotation angle = 0
  Source counts = 1420.3 +/- 37.7
  Background counts = 0.7
  Rate = 0.02 +/- 0.0006
[Fri May  3 15:55:33 2013] Vigneting correction estimate = 1.000000
[Fri May  3 15:55:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 15:55:33 2013] Assessing source extent using major axis lower bound
[Fri May  3 15:55:33 2013] Source does appear to be extended
[Fri May  3 15:55:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:55:33 2013] Source is confused with source 34
[Fri May  3 15:55:33 2013] Source is confused with source 101
[Fri May  3 15:55:33 2013] Source is confused with source 106
[Fri May  3 15:55:33 2013] Source is confused with source 108
[Fri May  3 15:55:33 2013] Source is confused with source 114
[Fri May  3 15:56:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 15:56:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 15:56:22 2013] Initial guess for spatial extent in simple fitting = 22.44"
[Fri May  3 15:56:22 2013] source mask rpix=5.2, npix_max = 128, mask sum = 117, frac = 0.913
[Fri May  3 15:56:22 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 22.44"
[Fri May  3 21:48:43 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src3.ximg exists
[Fri May  3 21:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src3.csv
[Fri May  3 21:48:43 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May  3 21:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src3.csv
[Fri May  3 21:48:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:48:45 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May  3 21:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May  3 21:48:45 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May  3 21:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May  3 21:48:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:49:42 2013] Warning, spatial fit 3 centroid is now closest to src. 106
[Sat May  4 03:49:42 2013] Vigneting correction estimate = 1.000000
[Sat May  4 03:49:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 03:49:42 2013] Assessing source extent using major axis lower bound
[Sat May  4 03:49:42 2013] Source does appear to be extended
[Sat May  4 03:49:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 03:50:35 2013] Counts = 1420.290000, rescaling region sizes by 2.000000
[Sat May  4 03:50:35 2013] XMMSAS src. selection expression = ellipse(40625.728000, 14210.339000, 2693.016077, 2693.016077, 0.000000, X, Y)
[Sat May  4 03:50:35 2013] Writing source region out to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src7_src.reg
[Sat May  4 03:50:35 2013] Extracting stamp from image fullrun_pn_xmm0653320101_pi300-10000_cl_sm2.00.img.gz, (313, 9) - (595, 319)
[Sat May  4 03:50:35 2013] XMMSAS bgd. selection expression = annulus(40625.728000, 14210.339000, 8976.720258, 17953.440517, X, Y) && !ellipse(35980.333620, 16513.626400, 756.922422, 305.312009, 121.999200, X, Y) && !ellipse(32340.674988, 24352.185669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30712.507477, 22514.942566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42015.989380, 14001.421204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22095.567413, 30486.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37994.002319, 30193.611206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38851.781219, 30012.105438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37428.640381, 30228.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36356.649400, 30291.826600, 1778.352051, 821.248024, 1.506580, X, Y) && !ellipse(39383.294189, 29944.131378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32784.996796, 30053.247772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42218.355713, 29799.926117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35565.729600, 30059.295400, 2057.976059, 342.796010, 345.877900, X, Y) && !ellipse(41780.806885, 29828.674774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34155.566000, 29669.884000, 1644.864047, 211.960806, 341.505300, X, Y) && !ellipse(42685.621600, 29825.102600, 2185.792063, 411.416812, 11.475900, X, Y) && !ellipse(39922.923584, 29994.531799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33688.052600, 29496.790400, 1594.336046, 216.519206, 337.987500, X, Y) && !ellipse(42084.385590, 29258.101013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40171.967987, 29454.158997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37136.361481, 29205.228760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36584.958600, 29073.557400, 1776.368051, 222.046406, 348.294000, X, Y) && !ellipse(40924.082031, 29712.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31091.465118, 29061.238556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.475600, 29021.788800, 418.856812, 209.199206, 2.300476, X, Y) && !ellipse(41333.673401, 29018.049194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32198.843323, 28844.997040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42465.910645, 29099.593109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39627.859558, 28843.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38937.136000, 28550.636800, 1946.208056, 1946.208056, 0.000000, X, Y) && !ellipse(42967.113800, 28570.294434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36796.838989, 28471.814087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40091.130310, 28427.899902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39448.169830, 28431.343475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37771.258636, 28663.215149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38306.199249, 28325.479492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30945.204865, 28140.065521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39881.990200, 27174.414400, 1971.272057, 246.408807, 357.840370, X, Y) && !ellipse(29746.434000, 27200.027100, 2058.000059, 885.304025, 311.354800, X, Y) && !ellipse(28889.447540, 27073.885406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38636.437103, 27006.097198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32713.072052, 26856.149109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37754.916931, 26898.786224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37255.726200, 26727.168000, 1780.624051, 222.578406, 345.654100, X, Y) && !ellipse(36504.845000, 26506.983600, 1728.024050, 216.003206, 341.143200, X, Y) && !ellipse(38073.722229, 14362.602097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38620.716675, 14343.969101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23264.600660, 25815.534600, 405.952812, 405.952812, 0.000000, X, Y) && !ellipse(27482.056335, 25129.328674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22622.882782, 25042.968536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33403.507200, 24934.616200, 1540.744044, 197.416006, 323.884997, X, Y) && !ellipse(24556.124000, 24248.835800, 670.151219, 296.568809, 332.376297, X, Y) && !ellipse(32135.427948, 23603.310760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42378.422119, 22911.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30706.002655, 21510.583481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41731.206000, 20902.431600, 2395.864069, 299.483209, 345.155600, X, Y) && !ellipse(42624.806183, 20948.126144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41554.617800, 20858.662000, 2129.656061, 266.206408, 345.721100, X, Y) && !ellipse(37566.266479, 14430.764664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42076.678040, 19858.040146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35369.566925, 19361.572235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29294.631561, 19467.521179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42080.154600, 19233.386000, 1362.480039, 272.397608, 341.755400, X, Y) && !ellipse(40144.238861, 19336.799484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41611.843475, 19012.547394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29815.766000, 19323.058000, 379.527211, 323.008009, 129.321000, X, Y) && !ellipse(41403.962800, 18914.241400, 2492.264072, 311.532809, 331.656000, X, Y) && !ellipse(25143.577600, 18348.360400, 508.837615, 508.837615, 0.000000, X, Y) && !ellipse(40402.307709, 18198.780914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41698.591248, 18045.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41311.973846, 18030.122833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42430.572205, 18218.806473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30272.141663, 17721.358856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42013.979523, 17507.820160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29370.653015, 17710.718826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41603.650055, 17087.518402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40970.189270, 16946.327927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28600.280000, 16386.248000, 1659.096048, 1659.096048, 0.000000, X, Y) && !ellipse(24470.041000, 16742.913014, 2063.608059, 426.844812, 87.722004, X, Y) && !ellipse(42082.290000, 16845.412000, 2228.664064, 278.583208, 319.289700, X, Y) && !ellipse(35860.568000, 14404.476000, 2007.032058, 328.896809, 7.269100, X, Y) && !ellipse(41991.117065, 15881.002731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34074.697800, 16232.906920, 810.240023, 397.445611, 116.274500, X, Y) && !ellipse(27099.479889, 15642.362061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41333.599060, 16048.888199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33526.477448, 15484.411713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41010.272247, 15090.178360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38237.203400, 15250.984000, 2113.568061, 264.196808, 105.077700, X, Y) && !ellipse(36113.137085, 15268.597656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35278.642792, 15257.640350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34254.467896, 15258.756790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41665.820221, 14992.121490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38179.665863, 14895.888626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40341.274000, 14131.250000, 2238.336064, 858.920025, 4.691450, X, Y) && !ellipse(35657.773010, 14938.264221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33239.266998, 14870.380432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33897.233704, 14906.010925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34287.321228, 14700.234207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34802.609314, 14740.122040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41139.851000, 14499.982000, 738.026421, 283.364808, 300.522500, X, Y)
[Sat May  4 03:50:35 2013] Writing fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src7.gif
[Sat May  4 04:02:54 2013] Mean detx,y = (-16390.72, -7904.12) 
[Sat May  4 04:03:06 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 04:05:52 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 04:05:53 2013] Setting source spectrum file to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat May  4 04:05:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat May  4 12:51:06 2013] Updating aperture counts using extracted products
[Sat May  4 12:51:06 2013] Total counts from fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 9375.00
[Sat May  4 12:51:06 2013] Total counts from fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 104118.00
[Sat May  4 12:51:07 2013] Got source and background scale factors 11598720.000000, 84453564.000000
[Sat May  4 12:51:07 2013] User source parameters:
  Position = (467.5, 163.9) = 17 33 22.58 -33 41 43.8
  Extent = 22.4 (20.0-23.6)", rotation angle = 0
  Source aperture counts = -4924.4 +/- 97.8
  Background aperture counts = 14299.4
  Rate = -0.08 +/- 0.002

[Sat May  4 12:51:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 12:51:38 2013] Using photon index=1.80, rate=0.0236, arf fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src7.arf
[Sat May  4 12:51:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 12:51:38 2013] Updating source flux to 6.8e-13
[Sat May  4 12:53:05 2013] Flag c found in src. 7 procflags, skipping spectral fitting
[Sat May  4 12:53:28 2013] xmm0653320101/analysis//spectral/fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete