[Fri May 3 03:33:53 2013] Detection parameters: Position = (487.7, 263.9) = 17 33 15.64 -33 34 34.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 226.7 +/- 39.6 Background counts = 483.4 Rate = 0.002 +/- 0.0003 [Fri May 3 03:33:55 2013] Off-axis axis estimate = 13.95' [Fri May 3 03:46:12 2013] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting [Fri May 3 03:46:12 2013] Initial guess for spatial extent in simple fitting = 13.40" [Fri May 3 03:46:12 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955 [Fri May 3 03:46:12 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 13.40" [Fri May 3 10:06:14 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src55.ximg exists [Fri May 3 10:06:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src55.csv [Fri May 3 10:06:14 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src55_1.ximg exists [Fri May 3 10:06:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src55.csv [Fri May 3 10:06:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 10:06:16 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Fri May 3 10:06:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src55.csv [Fri May 3 10:06:16 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Fri May 3 10:06:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src55.csv [Fri May 3 10:06:16 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 15:55:33 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 12.880537 pixels away [Fri May 3 15:55:33 2013] Vigneting correction estimate = 1.000000 [Fri May 3 15:55:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 15:55:33 2013] Assessing source extent using major [Fri May 3 15:55:33 2013] Source does appear to be extended [Fri May 3 15:55:33 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 15:56:22 2013] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting [Fri May 3 15:56:22 2013] Initial guess for spatial extent in simple fitting = 13.40" [Fri May 3 15:56:22 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955 [Fri May 3 15:56:22 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 13.40" [Fri May 3 21:48:44 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src54.ximg exists [Fri May 3 21:48:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src54.csv [Fri May 3 21:48:44 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src54_1.ximg exists [Fri May 3 21:48:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src54.csv [Fri May 3 21:48:44 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 21:48:45 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists [Fri May 3 21:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src54.csv [Fri May 3 21:48:45 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists [Fri May 3 21:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src54.csv [Fri May 3 21:48:45 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 03:49:42 2013] Source 62 is offset by -1.987403 and -7.988728 pixels which is larger than 2 X fitted extent = 2.784418 x 2.784418, not incorporating fit results [Sat May 4 03:49:42 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 13.837821 pixels away [Sat May 4 03:49:42 2013] Vigneting correction estimate = 1.000000 [Sat May 4 03:49:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 03:49:42 2013] Assessing source extent using major [Sat May 4 03:49:42 2013] Source does appear to be extended [Sat May 4 03:49:42 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 03:50:38 2013] XMMSAS src. selection expression = ellipse(42378.422119, 22911.128693, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 03:50:38 2013] Writing source region out to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src62_src.reg [Sat May 4 03:50:38 2013] Extracting stamp from image fullrun_pn_xmm0653320101_pi300-10000_cl_sm2.00.img.gz, (450, 226) - (525, 301) [Sat May 4 03:50:38 2013] XMMSAS bgd. selection expression = annulus(42378.422119, 22911.128693, 1087.500000, 2175.000000, X, Y) && !ellipse(41731.206000, 20902.431600, 2395.864069, 299.483209, 345.155600, X, Y) && !ellipse(42624.806183, 20948.126144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41554.617800, 20858.662000, 2129.656061, 266.206408, 345.721100, X, Y) && !ellipse(41403.962800, 18914.241400, 2492.264072, 311.532809, 331.656000, X, Y) [Sat May 4 03:50:38 2013] Writing fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src62.gif [Sat May 4 05:03:19 2013] Mean detx,y = (-17679.28, -60.64) [Sat May 4 05:03:24 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 05:03:45 2013] Binned source spectrum to 10 counts/bin [Sat May 4 05:03:46 2013] Setting source spectrum file to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Sat May 4 05:03:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src62_bgd.pi.gz [Sat May 4 07:10:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 4 07:10:16 2013] rmf not generated due to insufficient counts [Sat May 4 12:51:22 2013] Updating aperture counts using extracted products [Sat May 4 12:51:22 2013] Total counts from fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 1116.00 [Sat May 4 12:51:22 2013] Total counts from fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src62_bgd.pi.gz = 4293.00 [Sat May 4 12:51:23 2013] Got source and background scale factors 1269508.000000, 5181970.000000 [Sat May 4 12:51:23 2013] User source parameters: Position = (487.7, 263.9) = 17 33 15.64 -33 34 34.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 64.3 +/- 34.4 Background aperture counts = 1051.7 Rate = 0.001 +/- 0.0006 [Sat May 4 12:51:23 2013] Updating counts from extracted products [Sat May 4 12:51:23 2013] Set source signif. to 64.28/32.43 = 1.98 [Sat May 4 12:51:39 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 12:51:39 2013] Using photon index=1.80, rate=0.00107, arf fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src62.arf [Sat May 4 12:51:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 12:51:39 2013] Updating source flux to 2.5e-14 [Sat May 4 12:53:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 4 12:53:28 2013] xmm0653320101/analysis//spectral/fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete