[Fri May  3 03:33:51 2013] Detection parameters:
  Position = (483.5, 161.5) = 17 33 17.00 -33 41 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.8 +/- 22.8
  Background counts = 342.6
  Rate = 0.001 +/- 0.0002

[Fri May  3 03:33:55 2013] Off-axis axis estimate = 16.69'
[Fri May  3 03:46:12 2013] Using EEF radius (= 14.77 ")to estimate initial spatial extent for simple fitting
[Fri May  3 03:46:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 03:46:12 2013] Initial guess for spatial extent in simple fitting = 14.77"
[Fri May  3 03:46:12 2013] source mask rpix=3.4, npix_max = 60, mask sum = 33, frac = 0.543
[Fri May  3 03:46:12 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 14.77"
[Fri May  3 10:06:12 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src2.ximg exists
[Fri May  3 10:06:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src2.csv
[Fri May  3 10:06:12 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May  3 10:06:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src2.csv
[Fri May  3 10:06:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 10:06:15 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May  3 10:06:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May  3 10:06:15 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May  3 10:06:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May  3 10:06:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:55:33 2013] Warning, spatial fit 2 centroid is now closest to src. 101
[Fri May  3 15:55:33 2013] Vigneting correction estimate = 1.000000
[Fri May  3 15:55:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 15:55:33 2013] Assessing source extent using major
[Fri May  3 15:55:33 2013] Source does appear to be extended
[Fri May  3 15:55:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:56:22 2013] Using EEF radius (= 14.77 ")to estimate initial spatial extent for simple fitting
[Fri May  3 15:56:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 15:56:22 2013] Initial guess for spatial extent in simple fitting = 14.77"
[Fri May  3 15:56:22 2013] source mask rpix=3.4, npix_max = 60, mask sum = 33, frac = 0.543
[Fri May  3 15:56:22 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 14.77"
[Fri May  3 21:48:43 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src2.ximg exists
[Fri May  3 21:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src2.csv
[Fri May  3 21:48:43 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May  3 21:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src2.csv
[Fri May  3 21:48:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:48:45 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May  3 21:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May  3 21:48:45 2013] fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May  3 21:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May  3 21:48:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:49:42 2013] Warning, spatial fit 2 centroid is now closest to src. 114
[Sat May  4 03:49:42 2013] Vigneting correction estimate = 1.000000
[Sat May  4 03:49:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 03:49:42 2013] Assessing source extent using major
[Sat May  4 03:49:42 2013] Source does appear to be extended
[Sat May  4 03:49:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 03:50:35 2013] XMMSAS src. selection expression = ellipse(42015.989380, 14001.421204, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 03:50:35 2013] Writing source region out to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src5_src.reg
[Sat May  4 03:50:35 2013] Extracting stamp from image fullrun_pn_xmm0653320101_pi300-10000_cl_sm2.00.img.gz, (446, 124) - (521, 199)
[Sat May  4 03:50:35 2013] XMMSAS bgd. selection expression = annulus(42015.989380, 14001.421204, 1087.500000, 2175.000000, X, Y) && !ellipse(40625.728000, 14210.339000, 1795.344052, 1795.344052, 0.000000, X, Y) && !ellipse(40970.189270, 16946.327927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42082.290000, 16845.412000, 2228.664064, 278.583208, 319.289700, X, Y) && !ellipse(41991.117065, 15881.002731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41333.599060, 16048.888199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41010.272247, 15090.178360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38237.203400, 15250.984000, 2113.568061, 264.196808, 105.077700, X, Y) && !ellipse(41665.820221, 14992.121490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40341.274000, 14131.250000, 2238.336064, 858.920025, 4.691450, X, Y) && !ellipse(41139.851000, 14499.982000, 738.026421, 283.364808, 300.522500, X, Y)
[Sat May  4 03:50:35 2013] Writing fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src5.gif
[Sat May  4 04:00:18 2013] Mean detx,y = (-17894.79, -8829.15) 
[Sat May  4 04:00:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 04:00:38 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 04:00:39 2013] Setting source spectrum file to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May  4 04:00:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat May  4 06:13:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  4 06:13:54 2013] rmf not generated due to insufficient counts
[Sat May  4 12:51:06 2013] Updating aperture counts using extracted products
[Sat May  4 12:51:06 2013] Total counts from fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 390.00
[Sat May  4 12:51:06 2013] Total counts from fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 0.00
[Sat May  4 12:51:06 2013] Got source and background scale factors 671918.000000, 3457.000000
[Sat May  4 12:51:06 2013] User source parameters:
  Position = (483.5, 161.5) = 17 33 17.00 -33 41 51.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 390.0 +/- 20.8
  Background aperture counts = 0.0
  Rate = 0.006 +/- 0.0003

[Sat May  4 12:51:06 2013] Updating counts from extracted products
[Sat May  4 12:51:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 12:51:38 2013] Using photon index=1.80, rate=0.00649, arf fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src5.arf
[Sat May  4 12:51:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 12:51:38 2013] Getting flux using calc_pl_flux failed
[Sat May  4 12:53:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May  4 12:53:28 2013] xmm0653320101/analysis//spectral/fullrun_pn_xmm0653320101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete