[Fri May  3 03:34:45 2013] Detection parameters:
  Position = (351.6, 278.9) = 17 34 3.00 -33 33 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.7 +/- 27.1
  Background counts = 241.5
  Rate = 0.003 +/- 0.0003

[Fri May  3 03:34:47 2013] Off-axis axis estimate = 4.11'
[Fri May  3 10:06:17 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Fri May  3 10:06:17 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Fri May  3 10:06:17 2013] source mask rpix=1.9, npix_max = 24, mask sum = 25, frac = 1.041
[Fri May  3 10:06:17 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.48"
[Fri May  3 14:27:31 2013] fullrun_mos1_xmm0653320101_pi300-10000_cl_pass0_src20.ximg exists
[Fri May  3 14:27:31 2013] fullrun_mos1_xmm0653320101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri May  3 14:27:31 2013] Fit fullrun_mos1_xmm0653320101_pi300-10000_cl_pass0_src20 appears to have run properly
[Fri May  3 14:27:34 2013] fullrun_mos1_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri May  3 14:27:34 2013] fullrun_mos1_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri May  3 14:27:34 2013] Fit fullrun_mos1_xmm0653320101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri May  3 15:55:51 2013] Spatial fit model total counts = 1982.360000, observed total counts = 1817.000000
[Fri May  3 15:55:51 2013] Offset between fit and detection position for source 40 = 0.703778 pixels
[Fri May  3 15:55:51 2013] 1992.442000 total counts/ 1720.870000 bgd. counts: snr = 6.546527
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.703778 pixels
  Position = (351.7, 279.6) = 17 34 2.99 -33 33 21.1
  Extent = 17.0 (16.9-33.9)", rotation angle = 134 (132-136) degrees
  Source counts = 271.6 +/- 44.6
  Background counts = 1720.9
  Rate = 0.003 +/- 0.0005
[Fri May  3 15:55:52 2013] Vigneting correction estimate = 1.000000
[Fri May  3 15:55:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 15:55:52 2013] Assessing source extent using major axis lower bound
[Fri May  3 15:55:52 2013] Source does appear to be extended
[Fri May  3 15:55:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.17
[Fri May  3 15:55:52 2013] Source is asymmetric
[Fri May  3 21:48:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 21:48:46 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Fri May  3 21:48:46 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.861
[Fri May  3 21:48:46 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 9.54"
[Sat May  4 01:46:45 2013] fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_src19.ximg exists
[Sat May  4 01:46:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_src19.csv
[Sat May  4 01:46:45 2013] fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat May  4 01:46:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_src19.csv
[Sat May  4 01:46:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 01:46:47 2013] fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat May  4 01:46:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat May  4 01:46:47 2013] fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat May  4 01:46:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat May  4 01:46:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653320101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 03:50:01 2013] Warning, spatial fit 19 centroid is now closest to src. 43
[Sat May  4 03:50:02 2013] Vigneting correction estimate = 1.000000
[Sat May  4 03:50:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 03:50:02 2013] Assessing source extent using major axis lower bound
[Sat May  4 03:50:02 2013] Source does appear to be extended
[Sat May  4 03:50:02 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.17
[Sat May  4 03:50:02 2013] Source is asymmetric
[Sat May  4 08:03:18 2013] XMMSAS src. selection expression = ellipse(30545.188600, 24280.708400, 1017.852029, 127.231204, 133.853600, X, Y)
[Sat May  4 08:03:18 2013] Writing source region out to fullrun_mos1_xmm0653320101_pi300-10000_pass1_cl_src40_src.reg
[Sat May  4 08:03:18 2013] Extracting stamp from image fullrun_mos1_xmm0653320101_pi300-10000_cl_sm2.00.img.gz, (293, 221) - (410, 338)
[Sat May  4 08:03:18 2013] XMMSAS bgd. selection expression = annulus(30545.188600, 24280.708400, 1696.420049, 3392.840098, X, Y) && !ellipse(29546.148000, 24030.196000, 1291.408037, 459.421613, 7.915170, X, Y) && !ellipse(34549.874000, 27136.674000, 1594.760046, 353.570410, 339.589300, X, Y) && !ellipse(33082.894200, 24573.527800, 1523.856044, 394.445611, 148.532000, X, Y) && !ellipse(31386.983154, 21791.546646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32777.032800, 21601.355800, 1767.568051, 220.945606, 129.855700, X, Y) && !ellipse(28285.032776, 24024.825867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33799.432000, 21818.836000, 1633.392047, 224.780006, 317.363400, X, Y) && !ellipse(25437.993140, 21518.938600, 1725.632050, 428.988812, 107.893800, X, Y) && !ellipse(32293.572113, 24021.130066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33335.819794, 21291.222305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28571.893160, 25919.962800, 293.129608, 293.129608, 0.000000, X, Y) && !ellipse(29683.859600, 27170.501680, 1256.992036, 221.564006, 320.001000, X, Y) && !ellipse(27813.811200, 19543.845800, 1656.400048, 207.049606, 104.739700, X, Y) && !ellipse(32235.851776, 20919.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30952.208832, 27579.095001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29107.683400, 24067.802000, 1643.568047, 205.445606, 129.222000, X, Y) && !ellipse(32017.451721, 28153.502625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29924.434000, 26870.156000, 1325.744038, 379.970411, 141.498000, X, Y) && !ellipse(35439.345540, 22778.390000, 1697.120049, 212.139206, 324.090900, X, Y) && !ellipse(35462.300800, 27452.655000, 1682.504048, 212.556806, 343.016100, X, Y) && !ellipse(28552.151400, 23328.959800, 1274.192037, 184.612005, 304.002500, X, Y) && !ellipse(30212.084900, 27102.729645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28947.074000, 23530.486000, 1123.072032, 520.495215, 29.050600, X, Y) && !ellipse(35337.916000, 28490.599600, 1680.904048, 210.112806, 346.207400, X, Y) && !ellipse(34235.696838, 22298.632019, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 08:03:18 2013] Writing fullrun_mos1_xmm0653320101_pi300-10000_pass1_cl_src40.gif
[Sat May  4 08:21:52 2013] Mean detx,y = (-277.13, -6022.96) 
[Sat May  4 08:21:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 08:22:07 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 08:22:07 2013] Setting source spectrum file to fullrun_mos1_xmm0653320101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat May  4 08:22:07 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0653320101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat May  4 12:51:44 2013] Updating aperture counts using extracted products
[Sat May  4 12:51:44 2013] Total counts from fullrun_mos1_xmm0653320101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 375.00
[Sat May  4 12:51:44 2013] Total counts from fullrun_mos1_xmm0653320101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 11831.00
[Sat May  4 12:51:44 2013] Got source and background scale factors 340960.000000, 14326393.000000
[Sat May  4 12:51:44 2013] User source parameters:
  Position = (351.7, 279.6) = 17 34 2.99 -33 33 21.1
  Extent = 17.0 (16.9-33.9)", rotation angle = 134 (132-136) degrees
  Source aperture counts = 93.4 +/- 20.4
  Background aperture counts = 281.6
  Rate = 0.0009 +/- 0.0002

[Sat May  4 12:52:01 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 12:52:01 2013] Using photon index=1.80, rate=0.00276, arf fullrun_mos1_xmm0653320101_pi300-10000_pass1_cl_src40.arf
[Sat May  4 12:52:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 12:52:01 2013] Updating source flux to 8.5e-14
[Sat May  4 12:52:46 2013] xmm0653320101/analysis//spectral/fullrun_mos1_xmm0653320101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete