[Fri Aug 10 10:21:42 2012] Detection parameters:
  Position = (128.8, 302.9) = 0 4 0.55 -1 49 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 11.8
  Background counts = 22.1
  Rate = 0.002 +/- 0.0005

[Fri Aug 10 10:21:43 2012] Off-axis axis estimate = 12.31'
[Fri Aug 10 10:25:09 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 10:25:09 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Fri Aug 10 10:25:09 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Fri Aug 10 10:25:09 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.58"
[Fri Aug 10 11:42:43 2012] fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug 10 11:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_src13.csv
[Fri Aug 10 11:42:43 2012] fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug 10 11:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_src13.csv
[Fri Aug 10 11:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 11:42:43 2012] fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 10 11:42:43 2012] fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 10 11:42:43 2012] Fit fullrun_pn_xmm0653290101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug 10 13:22:57 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.263285 pixels away
[Fri Aug 10 13:22:57 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 13:22:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 13:22:57 2012] Assessing source extent using major
[Fri Aug 10 13:22:57 2012] Source does appear to be extended
[Fri Aug 10 13:22:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 13:23:28 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 13:23:28 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Fri Aug 10 13:23:28 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Fri Aug 10 13:23:28 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.58"
[Fri Aug 10 14:42:08 2012] fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_src13.ximg exists
[Fri Aug 10 14:42:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_src13.csv
[Fri Aug 10 14:42:08 2012] fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Aug 10 14:42:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_src13.csv
[Fri Aug 10 14:42:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 14:42:08 2012] fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Aug 10 14:42:08 2012] fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Aug 10 14:42:08 2012] Fit fullrun_pn_xmm0653290101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Aug 10 16:10:31 2012] Spatial fit model total counts = 290.930000, observed total counts = 291.000000
[Fri Aug 10 16:10:31 2012] Offset between fit and detection position for source 13 = 0.512640 pixels
[Fri Aug 10 16:10:31 2012] 287.639900 total counts/ 240.907000 bgd. counts: snr = 3.010912
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.512640 pixels
  Position = (129.2, 302.6) = 0 4 0.44 -1 49 27.1
  Extent = 8.0 (5.2-12.4)", rotation angle = 0
  Source counts = 46.7 +/- 17.0
  Background counts = 240.9
  Rate = 0.002 +/- 0.0008
[Fri Aug 10 16:10:31 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 16:10:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 16:10:31 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 16:10:31 2012] Source does appear to be extended
[Fri Aug 10 16:10:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 16:11:01 2012] XMMSAS src. selection expression = ellipse(11187.943600, 26278.916000, 482.484014, 482.484014, 0.000000, X, Y)
[Fri Aug 10 16:11:01 2012] Writing source region out to fullrun_pn_xmm0653290101_pi300-10000_pass1_cl_src13_src.reg
[Fri Aug 10 16:11:01 2012] Extracting stamp from image fullrun_pn_xmm0653290101_pi300-10000_cl_sm2.00.img.gz, (101, 275) - (157, 330)
[Fri Aug 10 16:11:01 2012] XMMSAS bgd. selection expression = annulus(11187.943600, 26278.916000, 804.140023, 1608.280046, X, Y)
[Fri Aug 10 16:11:01 2012] Writing fullrun_pn_xmm0653290101_pi300-10000_pass1_cl_src13.gif
[Fri Aug 10 16:22:10 2012] Mean detx,y = (-14675.98, 7113.39) 
[Fri Aug 10 16:22:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 16:22:31 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 16:22:31 2012] Setting source spectrum file to fullrun_pn_xmm0653290101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Aug 10 16:22:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0653290101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Aug 10 16:52:35 2012] Not generating rmf since there are only 46 counts
[Fri Aug 10 16:52:35 2012] rmf not generated due to insufficient counts
[Fri Aug 10 17:31:43 2012] Updating aperture counts using extracted products
[Fri Aug 10 17:31:43 2012] Error reading totcts from fullrun_pn_xmm0653290101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Aug 10 17:31:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 17:31:45 2012] Using photon index=1.80, rate=0.00217, arf fullrun_pn_xmm0653290101_pi300-10000_pass1_cl_src13.arf
[Fri Aug 10 17:31:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 17:31:45 2012] Updating source flux to 2e-14
[Fri Aug 10 17:32:11 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting