[Sat Apr 28 10:04:49 2012] Detection parameters:
  Position = (380.8, 291.1) = 6 13 37.65 -33 28 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.2 +/- 10.0
  Background counts = 13.6
  Rate = 0.007 +/- 0.001

[Sat Apr 28 10:04:49 2012] Off-axis axis estimate = 5.99'
[Sat Apr 28 10:05:50 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 10:05:50 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Sat Apr 28 10:05:50 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.055
[Sat Apr 28 10:05:50 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.42"
[Sat Apr 28 10:46:42 2012] fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_src23.ximg exists
[Sat Apr 28 10:46:42 2012] fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Apr 28 10:46:42 2012] Fit fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_src23 appears to have run properly
[Sat Apr 28 10:46:43 2012] fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Apr 28 10:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Apr 28 10:46:43 2012] fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Apr 28 10:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Apr 28 10:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653190101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 11:32:08 2012] Warning, spatial fit 23 centroid is now closest to src. 24
[Sat Apr 28 11:32:08 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 11:32:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 11:32:08 2012] Assessing source extent using major
[Sat Apr 28 11:32:08 2012] Source does appear to be extended
[Sat Apr 28 11:32:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 11:32:22 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 11:32:22 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Sat Apr 28 11:32:22 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.055
[Sat Apr 28 11:32:22 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 9.42"
[Sat Apr 28 12:11:16 2012] fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_src22.ximg exists
[Sat Apr 28 12:11:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_src22.csv
[Sat Apr 28 12:11:16 2012] fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Apr 28 12:11:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_src22.csv
[Sat Apr 28 12:11:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 12:11:16 2012] fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Apr 28 12:11:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat Apr 28 12:11:16 2012] fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Apr 28 12:11:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat Apr 28 12:11:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653190101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 12:53:23 2012] Source 25 is offset by 5.106214 and -2.201093 pixels which is larger than
2 X fitted extent = 1.083329 x 1.083329, not incorporating fit results
[Sat Apr 28 12:53:23 2012] Spatial fit model total counts = 223.205000, observed total counts = 185.000000
[Sat Apr 28 12:53:23 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr 28 12:53:23 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 12:53:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 12:53:23 2012] Assessing source extent using major
[Sat Apr 28 12:53:23 2012] Source does appear to be extended
[Sat Apr 28 12:53:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 12:53:36 2012] XMMSAS src. selection expression = ellipse(33078.738617, 25280.006897, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr 28 12:53:36 2012] Writing source region out to fullrun_pn_xmm0653190101_pi300-10000_pass1_cl_src25_src.reg
[Sat Apr 28 12:53:36 2012] Extracting stamp from image fullrun_pn_xmm0653190101_pi300-10000_cl_sm2.00.img.gz, (343, 254) - (418, 329)
[Sat Apr 28 12:53:36 2012] XMMSAS bgd. selection expression = annulus(33078.738617, 25280.006897, 1087.500000, 2175.000000, X, Y) && !ellipse(32855.888733, 26313.615112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32647.930908, 27107.752960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31886.877380, 26164.397156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31217.212600, 26082.303800, 485.336014, 485.336014, 0.000000, X, Y) && !ellipse(34556.695190, 25344.516144, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr 28 12:53:36 2012] Writing fullrun_pn_xmm0653190101_pi300-10000_pass1_cl_src25.gif
[Sat Apr 28 13:06:42 2012] Mean detx,y = (-8166.70, -5.92) 
[Sat Apr 28 13:06:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr 28 13:07:13 2012] Binned source spectrum to 10 counts/bin
[Sat Apr 28 13:07:13 2012] Setting source spectrum file to fullrun_pn_xmm0653190101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Apr 28 13:07:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0653190101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Apr 28 13:21:43 2012] Not generating rmf since there are only 51 counts
[Sat Apr 28 13:21:43 2012] rmf not generated due to insufficient counts
[Sat Apr 28 13:53:34 2012] Updating aperture counts using extracted products
[Sat Apr 28 13:53:34 2012] Error reading totcts from fullrun_pn_xmm0653190101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Apr 28 13:53:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 28 13:53:34 2012] Using photon index=1.80, rate=0.00742, arf fullrun_pn_xmm0653190101_pi300-10000_pass1_cl_src25.arf
[Sat Apr 28 13:53:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr 28 13:53:34 2012] Updating source flux to 3.1e-14
[Sat Apr 28 13:54:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting