[Fri May  4 10:57:01 2012] Detection parameters:
  Position = (288.2, 141.0) = 17 52 14.27 -22 30 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.7 +/- 22.4
  Background counts = 100.9
  Rate = 0.004 +/- 0.0005

[Fri May  4 10:57:01 2012] Off-axis axis estimate = 11.44'
[Mon May  7 04:36:46 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Mon May  7 04:36:46 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Mon May  7 04:36:46 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830
[Mon May  7 04:36:46 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 12.15"
[Mon May  7 07:48:18 2012] fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_src22.ximg exists
[Mon May  7 07:48:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_src22.csv
[Mon May  7 07:48:18 2012] fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon May  7 07:48:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_src22.csv
[Mon May  7 07:48:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 07:48:19 2012] fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon May  7 07:48:19 2012] fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon May  7 07:48:19 2012] Fit fullrun_mos2_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Mon May  7 07:49:00 2012] Warning, spatial fit 22 centroid is now closest to src. 29
[Mon May  7 07:49:00 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 12.529090 pixels away
[Mon May  7 07:49:01 2012] Vigneting correction estimate = 1.000000
[Mon May  7 07:49:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 07:49:01 2012] Assessing source extent using major
[Mon May  7 07:49:01 2012] Source does appear to be extended
[Mon May  7 07:49:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:49:01 2012] Source is confused with source 30
[Fri May 11 07:50:37 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Fri May 11 07:50:37 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Fri May 11 07:50:37 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830
[Fri May 11 07:50:37 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.15"
[Fri May 11 15:43:21 2012] fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_src17.ximg exists
[Fri May 11 15:43:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_src17.csv
[Fri May 11 15:43:21 2012] fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May 11 15:43:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_src17.csv
[Fri May 11 15:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 15:43:21 2012] fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May 11 15:43:21 2012] fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May 11 15:43:21 2012] Fit fullrun_mos2_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri May 11 15:43:42 2012] Warning, spatial fit 17 centroid is now closest to src. 28
[Fri May 11 15:43:42 2012] Source 33 is offset by 7.552940 and -2.258105 pixels which is larger than
2 X fitted extent = 3.997550 x 3.997550, not incorporating fit results
[Fri May 11 15:43:42 2012] Vigneting correction estimate = 1.000000
[Fri May 11 15:43:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 15:43:42 2012] Assessing source extent using major
[Fri May 11 15:43:42 2012] Source does appear to be extended
[Fri May 11 15:43:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 13 10:33:41 2012] XMMSAS src. selection expression = ellipse(25027.165802, 12221.640900, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 13 10:33:41 2012] Writing source region out to fullrun_mos2_xmm0653110101_pi300-10000_pass1_cl_src33_src.reg
[Sun May 13 10:33:41 2012] Extracting stamp from image fullrun_mos2_xmm0653110101_pi300-10000_cl_sm2.00.img.gz, (251, 104) - (326, 179)
[Sun May 13 10:33:41 2012] XMMSAS bgd. selection expression = annulus(25027.165802, 12221.640900, 1087.500000, 2175.000000, X, Y) && !ellipse(25071.033000, 15108.325800, 767.424022, 767.424022, 0.000000, X, Y) && !ellipse(24917.964447, 11437.573578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24971.736755, 14220.783707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.621368, 10737.908974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24906.337400, 8929.214000, 1195.256034, 1195.256034, 0.000000, X, Y) && !ellipse(24966.743600, 13126.793600, 1874.240054, 234.280007, 90.000000, X, Y) && !ellipse(24997.330400, 9972.456920, 671.658419, 671.658419, 0.000000, X, Y) && !ellipse(24945.895355, 13870.144608, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 13 10:33:41 2012] Writing fullrun_mos2_xmm0653110101_pi300-10000_pass1_cl_src33.gif
[Sun May 13 11:12:09 2012] Mean detx,y = (243.22, 12032.25) 
[Sun May 13 11:12:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 11:12:36 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 11:12:37 2012] Setting source spectrum file to fullrun_mos2_xmm0653110101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun May 13 11:12:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653110101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun May 13 12:14:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 13 12:14:08 2012] rmf not generated due to insufficient counts
[Sun May 13 12:18:53 2012] Updating aperture counts using extracted products
[Sun May 13 12:18:53 2012] Error reading totcts from fullrun_mos2_xmm0653110101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun May 13 12:18:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 13 12:18:55 2012] Using photon index=1.80, rate=0.00362, arf fullrun_mos2_xmm0653110101_pi300-10000_pass1_cl_src33.arf
[Sun May 13 12:18:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 13 12:18:55 2012] Updating source flux to 1.6e-13
[Sun May 13 12:24:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting