[Fri May  4 10:56:40 2012] Detection parameters:
  Position = (283.0, 262.4) = 17 52 15.91 -22 21 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12139.9 +/- 156.6
  Background counts = 337.5
  Rate = 0.3 +/- 0.004

[Fri May  4 10:56:52 2012] Off-axis axis estimate = 2.84'
[Fri May  4 11:17:03 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Fri May  4 11:17:03 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Fri May  4 11:17:03 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.659
[Fri May  4 11:17:03 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.85"
[Mon May  7 04:36:44 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src3.ximg exists
[Mon May  7 04:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src3.csv
[Mon May  7 04:36:44 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May  7 04:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src3.csv
[Mon May  7 04:36:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 04:36:45 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May  7 04:36:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May  7 04:36:45 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May  7 04:36:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May  7 04:36:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 07:48:46 2012] Warning, spatial fit 3 centroid is now closest to src. 18
[Mon May  7 07:48:46 2012] Spatial fit model total counts = 37728.500000, observed total counts = 40416.000000
[Mon May  7 07:48:46 2012] Offset between fit and detection position for source 4 = 3.442564 pixels
[Mon May  7 07:48:46 2012] Warning, changing simple spatial fit ID from 3 to 20
[Mon May  7 07:48:46 2012] 38153.000000 total counts/ 25600.000000 bgd. counts: snr = 78.456250
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.442564 pixels
  Position = (284.8, 265.3) = 17 52 15.34 -22 21 31.8
  Extent = 14.5 (13.9-14.9)", rotation angle = 0
  Source counts = 12553.0 +/- 195.3
  Background counts = 25600.0
  Rate = 0.3 +/- 0.005
[Mon May  7 07:48:46 2012] Source 4 is offset by 1.693011 and 2.698782 pixels which is larger than
2 X fitted extent = 1.324216 x 1.324216, not incorporating fit results
[Mon May  7 07:48:46 2012] Vigneting correction estimate = 1.000000
[Mon May  7 07:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 07:48:46 2012] Assessing source extent using major axis lower bound
[Mon May  7 07:48:46 2012] Source does appear to be extended
[Mon May  7 07:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:48:46 2012] Source is confused with source 2
[Mon May  7 07:49:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 07:49:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 07:49:11 2012] Initial guess for spatial extent in simple fitting = 14.49"
[Mon May  7 07:49:11 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.953
[Mon May  7 07:49:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.49"
[Fri May 11 07:50:36 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 11 07:50:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src3.csv
[Fri May 11 07:50:36 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 11 07:50:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src3.csv
[Fri May 11 07:50:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 07:50:36 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 11 07:50:36 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 11 07:50:37 2012] Fit fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May 11 15:43:34 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri May 11 15:43:34 2012] Spatial fit model total counts = 37422.700000, observed total counts = 40416.000000
[Fri May 11 15:43:34 2012] Offset between fit and detection position for source 4 = 0.742748 pixels
[Fri May 11 15:43:34 2012] Warning, changing simple spatial fit ID from 3 to 20
[Fri May 11 15:43:34 2012] 35063.600000 total counts/ 25600.000000 bgd. counts: snr = 59.147500
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.742748 pixels
  Position = (285.0, 264.6) = 17 52 15.29 -22 21 35.0
  Extent = 15.9 (15.9-31.9)" x 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 9463.6 +/- 187.3
  Background counts = 25600.0
  Rate = 0.2 +/- 0.005
[Fri May 11 15:43:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 15:43:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 15:43:34 2012] Assessing source extent using major axis lower bound
[Fri May 11 15:43:34 2012] Source does appear to be extended
[Fri May 11 15:43:34 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.60
[Fri May 11 15:43:34 2012] Source is asymmetric
[Fri May 11 15:43:55 2012] Counts = 9463.600000, rescaling region sizes by 2.000000
[Fri May 11 15:43:55 2012] XMMSAS src. selection expression = ellipse(24744.366000, 22971.468000, 1911.456055, 697.743620, 0.014000, X, Y)
[Fri May 11 15:43:55 2012] Writing source region out to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src4_src.reg
[Fri May 11 15:43:55 2012] Extracting stamp from image fullrun_mos1_xmm0653110101_pi300-10000_cl_sm2.00.img.gz, (175, 155) - (395, 374)
[Fri May 11 15:43:56 2012] XMMSAS bgd. selection expression = annulus(24744.366000, 22971.468000, 6371.520183, 12743.040367, X, Y) && !ellipse(25829.258000, 24325.349000, 3463.968100, 3463.968100, 0.000000, X, Y) && !ellipse(24798.506000, 24176.320000, 4592.064132, 4592.064132, 0.000000, X, Y) && !ellipse(24870.899600, 24305.912480, 4340.304125, 3846.864111, 143.001000, X, Y) && !ellipse(24654.859009, 25653.800507, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25757.160797, 25658.781342, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27274.844000, 26074.866000, 1090.416031, 1090.416031, 0.000000, X, Y) && !ellipse(23983.094116, 25656.280304, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22952.734000, 25537.870000, 389.947211, 389.947211, 0.000000, X, Y) && !ellipse(22394.822000, 26206.968000, 1223.360035, 1223.360035, 0.000000, X, Y) && !ellipse(27379.073059, 25355.882324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.566711, 24053.309021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21611.144043, 24249.441345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.764313, 23797.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.190887, 22765.550781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.674988, 22685.610504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.433624, 22754.104950, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23923.254000, 22855.422000, 311.430409, 311.430409, 0.000000, X, Y) && !ellipse(27486.399963, 22361.144684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.894089, 22145.837738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.687531, 22309.350372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25230.949921, 22293.664459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24491.136660, 21906.140000, 3894.744112, 3894.744112, 0.000000, X, Y) && !ellipse(23570.699036, 22191.163071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25402.634000, 25179.160000, 3146.040091, 3146.040091, 0.000000, X, Y) && !ellipse(26443.726000, 21848.250000, 1269.496037, 1269.496037, 0.000000, X, Y) && !ellipse(21698.494507, 21429.362152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21714.058289, 27003.638641, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 15:43:56 2012] Writing fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src4.gif
[Fri May 11 16:44:17 2012] Mean detx,y = (1269.78, -171.21) 
[Fri May 11 16:44:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 16:52:35 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 16:52:36 2012] Setting source spectrum file to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 11 16:52:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May 13 12:18:47 2012] Updating aperture counts using extracted products
[Sun May 13 12:18:48 2012] Error reading totcts from fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 13 12:18:50 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 13 12:18:50 2012] Using photon index=1.80, rate=0.229, arf fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src4.arf
[Sun May 13 12:18:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 13 12:18:50 2012] Updating source flux to 2.3e-12
[Sun May 13 12:18:57 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Sun May 13 12:18:57 2012] Flag c found in src. 4 procflags, skipping spectral fitting