[Fri May  4 10:56:45 2012] Detection parameters:
  Position = (307.7, 257.7) = 17 52 8.17 -22 22 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 712.2 +/- 51.3
  Background counts = 323.3
  Rate = 0.02 +/- 0.001

[Fri May  4 10:56:52 2012] Off-axis axis estimate = 3.03'
[Fri May  4 11:17:03 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Fri May  4 11:17:03 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Fri May  4 11:17:03 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.155
[Fri May  4 11:17:03 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.94"
[Mon May  7 04:36:44 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src24.ximg exists
[Mon May  7 04:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src24.csv
[Mon May  7 04:36:44 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon May  7 04:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src24.csv
[Mon May  7 04:36:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 04:36:46 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon May  7 04:36:46 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon May  7 04:36:46 2012] Fit fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon May  7 07:48:46 2012] Spatial fit model total counts = 18535.300000, observed total counts = 19389.000000
[Mon May  7 07:48:46 2012] Offset between fit and detection position for source 27 = 4.517042 pixels
[Mon May  7 07:48:46 2012] 14815.880000 total counts/ 6842.970000 bgd. counts: snr = 96.381691
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 4.517042 pixels
  Position = (306.9, 253.2) = 17 52 8.40 -22 22 24.5
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 7972.9 +/- 121.7
  Background counts = 6843.0
  Rate = 0.2 +/- 0.003
[Mon May  7 07:48:46 2012] Vigneting correction estimate = 1.000000
[Mon May  7 07:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 07:48:46 2012] Assessing source extent using major axis lower bound
[Mon May  7 07:48:46 2012] Source does appear to be extended
[Mon May  7 07:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:48:46 2012] Source is confused with source 15
[Mon May  7 07:49:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 07:49:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 07:49:11 2012] Initial guess for spatial extent in simple fitting = 15.89"
[Mon May  7 07:49:11 2012] source mask rpix=3.7, npix_max = 68, mask sum = 64, frac = 0.928
[Mon May  7 07:49:11 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 15.89"
[Fri May 11 07:50:36 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src24.ximg exists
[Fri May 11 07:50:36 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri May 11 07:50:36 2012] Fit fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src24 appears to have run properly
[Fri May 11 07:50:37 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri May 11 07:50:37 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri May 11 07:50:37 2012] Fit fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri May 11 15:43:34 2012] Spatial fit model total counts = 22297.900000, observed total counts = 22593.000000
[Fri May 11 15:43:34 2012] Offset between fit and detection position for source 27 = 2.873941 pixels
[Fri May 11 15:43:34 2012] Warning, changing simple spatial fit ID from 24 to 19
[Fri May 11 15:43:34 2012] 22505.250000 total counts/ 18316.000000 bgd. counts: snr = 30.954298
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.873941 pixels
  Position = (304.5, 251.7) = 17 52 9.17 -22 22 31.2
  Extent = 15.9 (15.8-31.7)", rotation angle = 0
  Source counts = 4189.2 +/- 150.0
  Background counts = 18316.0
  Rate = 0.1 +/- 0.004
[Fri May 11 15:43:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 15:43:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 15:43:34 2012] Assessing source extent using major axis lower bound
[Fri May 11 15:43:34 2012] Source does appear to be extended
[Fri May 11 15:43:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 15:43:58 2012] Counts = 4189.250000, rescaling region sizes by 2.000000
[Fri May 11 15:43:58 2012] XMMSAS src. selection expression = ellipse(26443.726000, 21848.250000, 1904.244055, 1904.244055, 0.000000, X, Y)
[Fri May 11 15:43:58 2012] Writing source region out to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src27_src.reg
[Fri May 11 15:43:58 2012] Extracting stamp from image fullrun_mos1_xmm0653110101_pi300-10000_cl_sm2.00.img.gz, (195, 142) - (414, 361)
[Fri May 11 15:43:58 2012] XMMSAS bgd. selection expression = annulus(26443.726000, 21848.250000, 6347.480183, 12694.960365, X, Y) && !ellipse(25829.258000, 24325.349000, 3463.968100, 3463.968100, 0.000000, X, Y) && !ellipse(24798.506000, 24176.320000, 4592.064132, 4592.064132, 0.000000, X, Y) && !ellipse(24870.899600, 24305.912480, 4340.304125, 3846.864111, 143.001000, X, Y) && !ellipse(24744.366000, 22971.468000, 1274.304037, 465.162413, 0.014000, X, Y) && !ellipse(24654.859009, 25653.800507, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25757.160797, 25658.781342, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27274.844000, 26074.866000, 1090.416031, 1090.416031, 0.000000, X, Y) && !ellipse(23983.094116, 25656.280304, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22952.734000, 25537.870000, 389.947211, 389.947211, 0.000000, X, Y) && !ellipse(22394.822000, 26206.968000, 1223.360035, 1223.360035, 0.000000, X, Y) && !ellipse(27379.073059, 25355.882324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.566711, 24053.309021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21611.144043, 24249.441345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.764313, 23797.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.190887, 22765.550781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.674988, 22685.610504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.433624, 22754.104950, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23923.254000, 22855.422000, 311.430409, 311.430409, 0.000000, X, Y) && !ellipse(27486.399963, 22361.144684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.894089, 22145.837738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.687531, 22309.350372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25230.949921, 22293.664459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24491.136660, 21906.140000, 3894.744112, 3894.744112, 0.000000, X, Y) && !ellipse(23570.699036, 22191.163071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25402.634000, 25179.160000, 3146.040091, 3146.040091, 0.000000, X, Y) && !ellipse(21698.494507, 21429.362152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21714.058289, 27003.638641, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 15:43:58 2012] Writing fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src27.gif
[Fri May 11 20:18:59 2012] Mean detx,y = (1758.68, -1353.14) 
[Fri May 11 20:19:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 20:25:58 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 20:25:58 2012] Setting source spectrum file to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri May 11 20:25:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun May 13 12:18:49 2012] Updating aperture counts using extracted products
[Sun May 13 12:18:49 2012] Error reading totcts from fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun May 13 12:18:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 13 12:18:51 2012] Using photon index=1.80, rate=0.102, arf fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src27.arf
[Sun May 13 12:18:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 13 12:18:52 2012] Updating source flux to 1e-12
[Sun May 13 12:18:57 2012] Flag c found in src. 27 procflags, skipping spectral fitting